Best Face Mill Holders - Buying Guide
Last Updated: 05/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine. (EMRW 6R50-22(1.96 Inch))
Asin: B08BG697LV | Model: EMRW 6R50-22+R8-FMB22+RPMT1204 | PartNumber: EMRW 6R50-22+R8-FMB22+RPMT1204 | Ean: 8424602304199
Features
- The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products.
- Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head.
- The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load.
- Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good.
- High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.
- See more on Amazon...
The All-Steel Cutter Body Of The Steel Milling Cutter Is Your Savior For The Main Shaft, Allowing You To Reduce The Load On The Processing Of The Load..
High-Hardness Treatment Strong And Durable, The Surface Of The Cutter Head Is Treated With A New Thin Coating Treatment Liquid For High-Hardness Treatment, And Has Good Acid Resistance..
Strict Wire Jointing, Strong Compression Force, Screw Offset Tightening Design, So That The Blade Position Groove And The Blade Closely Fit Together, The Rigidity Is Enhanced, And The Processing Effect Is Good..
Hardening And Hardening High-Precision Shock Resistance, Good Permeability, Resistance To Multiple Impacts, Good Low-Temperature Impact Toughness, Sturdiness And Durability, Which Can Increase The Service Life And Shock Resistance Of The Cutter Head..
Brand: LingGan | Manufacturer: LingGan
Dimensions: 3.15 x 6.42 x 4.72 inches | Weight: 2.39 pounds
See On Amazon #2
GBJ 90 Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)
Asin: B08PYYM1FM | Model: GBJ | PartNumber: GBJ | Ean: 0787823340680 | UPC: 787823340680
Features
- About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting HRC15 -55
- About the 400R C24-25-200 -2T (0.98 Shank) Milling holder: 40Cr MnTi ,0.98 shank diameter , 0.98 cutting diameter, 7.87 overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert.
- Material : Made from alloy steel hardened to HRC 52-56 90 Cutting angle ,Screw down insert
- Advantage High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting
- Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts
- See more on Amazon...
☞Material : Made From Alloy Steel Hardened To Hrc 52-56 ，90° Cutting Angle ,Screw Down Insert.
☞Package: 1X 400R C24-25-200-2T Indexable End Mill With Wrench + 10Pcs Apmt1604pder Zm1135 Colorful Hardened Carbide Inserts.
☞ Advantage：High Vibration-Absorbing Performance, Improve The Surface Finish Of The Workpiece, Great For Shoulder Milling, Face Milling And Slotting.
☞About The 400R C24-25-200 -2T (0.98" Shank) Milling Holder: 40Cr Mnti ,0.98" Shank Diameter , 0.98" Cutting Diameter, 7.87" Overall Length. Through Heated And Quenched, Solid Hard With Good Cushioning Effect, Screw Down Insert..
Brand: GBJ | Manufacturer: GBJ
Dimensions: 0.04 x 7.87 x 0.98 inches
See On Amazon #3
Tegara CAT40 3/4 x 4" Shell Face Mill Tool Holder 202-6506 M[
Asin: B08BN322GX | Ean: 0000220265067 | UPC: 000220265067
Features
- Bore Dia. in Shell mill: 3/4"
- Gage Length: 4
- Shell mill pilot T.I.R <0.0002
- Made from alloy steel harden to 54-60 HRc
- All critical surface are precision ground
- See more on Amazon...
Shell Mill Pilot T.I.R <0.0002".
All Critical Surface Are Precision Ground.
Made From Alloy Steel Harden To 54-60 Hrc.
Gage Length: 4".
Brand: Tegara | Manufacturer: Shars Tool
Weight: 4.00 Pounds
See On Amazon #4
GBJ Face milling Holder 50mm/1.96" 50-22-4T CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)
Asin: B08NK342ZD | Model: GBJ | PartNumber: GBJ | Ean: 0787823340727 | UPC: 787823340727
Features
- About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert.
- About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting HRC15 -55
- Advantage High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting
- Material : Made from alloy steel hardened to HRC 52-56 90 Cutting angle ,Screw down insert
- Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts If you want the right blade, you can search ASIN: B0CFTK4K9T
- See more on Amazon...
🎄 Advantage：High Vibration-Absorbing Performance, Improve The Surface Finish Of The Workpiece, Great For Shoulder Milling, Face Milling And Slotting.
🎄 Package: 1X Bap 400R 50-22-4T Indexable End Mill With Wrench + 10Pcs Apmt1604pder Bp010 Carbide Inserts 🎄 If You Want The Right Blade, You Can Search Asin: B0cftk4k9t.
🎄 Material : Made From Alloy Steel Hardened To Hrc 52-56 ，90° Cutting Angle ,Screw Down Insert.
🎄 About The Apmt1604 Inserts: Carbide Inserts With Cvd Coating , Machining Steel Parts And Iron ,Pmksh,For Shoulder Milling, Face Milling And Slotting，Hrc15°-55°.
Brand: GBJ | Manufacturer: GBJ
See On Amazon #5
kimllier 1-1/2 Inch R8 Face Mill Holder Shank Shell Mill Arbor 7/16 Inch - 20UNF Drawbar Thread Pull Tail Wire Fit for Bridgeport Machine
Asin: B0B212FQJY | Model: Does Not Apply | PartNumber: Does Not Apply
Features
- Tool Holder Type: Face Mill Holder, Shank Size: R8
- Drawbar Thread Size: 7/16-20UNF, Arbor Diameter: 1-1/4, Range of Shell End Mill: 4 to 5 inch
- Accuracy: Bottom contact surface between face mill and this tool holder is accuracy ground finished, the runout tolerance is within .0004inch from R8 shank to face mill arbor
- Accuracy Manufacturing: Tool holder is made from drop forged alloy and heat treated to 56-58HRc, fine grinding of steel, efficient machining and durable
- Features: The Face Mill Holder is milled finished and assemble into the tool holder with screw. The double-sided clamping key is not easy to shake left and right during cutting
- See more on Amazon...
Accuracy: Bottom Contact Surface Between Face Mill And This Tool Holder Is Accuracy Ground Finished, The Runout Tolerance Is Within .0004Inch From R8 Shank To Face Mill Arbor.
Features: The Face Mill Holder Is Milled Finished And Assemble Into The Tool Holder With Screw. The Double-Sided Clamping Key Is Not Easy To Shake Left And Right During Cutting.
Accuracy Manufacturing: Tool Holder Is Made From Drop Forged Alloy And Heat Treated To 56-58Hrc, Fine Grinding Of Steel, Efficient Machining And Durable.
Drawbar Thread Size: 7/16-20Unf, Arbor Diameter: 1-1/4, Range Of Shell End Mill: 4 To 5 Inch.
Brand: kimllier | Manufacturer: kimllier
Dimensions: 1.97 x 8.66 x 3.15 inches | Weight: 3.44 Pounds
See On Amazon #6
End Mill Set, High Speed End Mill Cutter,with Face Mill Holder,T15 Wrench,Carbide Inserts,for Machining
Asin: B07QYCZBDL | Model: Jectse18pu209vdz | PartNumber: Jectse18pu209vdz | Ean: 0765192445724 | UPC: 765192445724
Features
- MATERIAL: The milling cutter is made of high-quality carbide, with high hardness, good impact resistance, strong durability and long service life
- HIGH QUALITY: The surface of the milling cutter adopts a new coating technology, which has good oxidation resistance and high temperature resistance, and can be used for a long time.
- HIGH SPEED:The milling cutter is very fast, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
- SUITABLE: The milling cutter kit has a wide range of machining, including fine machining, rough machining, flat machining and step machining, it is the ideal tool kit for heavy duty CNC milling
- PEODUCT INCLUDE: BAP400R-50-22 End Milling Cutter;MT2-FMB22 Face Mill Holder;T15 Wrench;10PCS APMT1604 Carbide Inserts with box
- See more on Amazon...
High Speed:The Milling Cutter Is Very Fast, And The Rotation And Milling Feed Rates Are 3 Times Faster Than Ordinary Milling Cutters..
Peoduct Include: Bap400r-50-22 End Milling Cutter;Mt2-Fmb22 Face Mill Holder;T15 Wrench;10Pcs Apmt1604 Carbide Inserts With Box.
Suitable: The Milling Cutter Kit Has A Wide Range Of Machining, Including Fine Machining, Rough Machining, Flat Machining And Step Machining, It Is The Ideal Tool Kit For Heavy Duty Cnc Milling.
High Quality: The Surface Of The Milling Cutter Adopts A New Coating Technology, Which Has Good Oxidation Resistance And High Temperature Resistance, And Can Be Used For A Long Time..
Brand: Jectse | Manufacturer: Jectse
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #7
CAT40-FMB22-60L Shell Face Mill Tool Holder CNC Center Tool for Milling Cutter Fine Face Milling Shank Holder Extension Rod Face Mill Arbor High Precision Face Milling Chuck Holder(CAT40-FMB22)
Asin: B09634T1DL | Ean: 0732246831550 | UPC: 732246831550
Features
- Model: CAT40-FMB22 -60L
- Application: for 40/50/63mm Diameter Face mill
- Hardened by quenching, Sturdiness and Durability: It is made of good materials, and the quenching process on the surface increases the hardness of the object. Not easy to deform even used long time, durable, accurate and stable.
- Exquisite craftsmanship Exquisite production craftsmanship, selected 40CrMnTi steel. Fine workmanship, Checked by multiple quality inspections
- Well polished: Smooth Inner hole, polished to shiny.
- See more on Amazon...
☞ Hardened By Quenching, Sturdiness And Durability: It Is Made Of Good Materials, And The Quenching Process On The Surface Increases The Hardness Of The Object. Not Easy To Deform Even Used Long Time, Durable, Accurate And Stable..
☞ Well Polished: Smooth Inner Hole, Polished To Shiny..
☞Exquisite Craftsmanship： Exquisite Production Craftsmanship, Selected 40Crmnti Steel. Fine Workmanship, Checked By Multiple Quality Inspections.
☞ Application: For 40/50/63Mm Diameter Face Mill.
Brand: GBJ | Manufacturer: GBJ
See On Amazon #8
Shars 1" R8 Shank Shell Face Mill Arbor Adapter Holder for Bridgeport 202-5162 P)
Asin: B081KBRD46 | Model: 202-5160-parent | PartNumber: 202-5160-parent
Features
- SKU# 202-5162
- SHANK SIZE: R8
- ARBOR DIAMETER: 1
- Hardened and ground
- Prevents run-out of your cutting tools
- See more on Amazon...
Arbor Diameter: 1.
Prevents Run-Out Of Your Cutting Tools.
Hardened And Ground.
Shank Size: R8.
Brand: Shars | Manufacturer: Shars
Weight: 2.00 Pounds
See On Amazon #9
Accusize Industrial Tools Cat40 1'' End Mill Holder with 3'' Indexable Face Milling Cutter, 7 Apkt1604 Carbide Inserts Installed, 90 Deg, 7104-4518
Asin: B07LC26HGC | Model: 7104-4518 | PartNumber: 7104-4518 | Ean: 0637665777529, 0663566022390 | UPC: 663566022390, 637665777529
Features
- Comprehensive Milling Solution: Includes a 3" indexable face milling cutter with a 90 cutting angle and a Cat40 1'' end mill holder, offering a complete setup for efficient milling operations.
- Precision Inserts Included: Equipped with 7 APKT1604 carbide inserts installed for high-performance face milling right out of the box.
- Versatile Applications: Ideal for square shoulder, side, slot, helical, ramping, and pocket milling in various materials including steels and aluminum alloys.
- Optimized Cutting Parameters: Features -10 radial rake and +7 axial rake angles for enhanced cutting efficiency and surface finish.
- High-Quality End Mill Holder: Cat40 1'' diameter end mill holder compatible with a wide range of machining centers, ensuring robust connection and precision alignment.
- CAT-40 Tool Holder Compatibility: Specifically designed for seamless integration with CAT-40 spindle machines, enhancing rigidity and precision.
- Versatile Milling Applications: Suitable for square shoulder, helical, ramping, slot, side milling, and pocketing in various materials.
- High-Performance Inserts: Equipped with 7 APKT1604 carbide inserts installed for immediate use, offering exceptional cutting efficiency.
- Advanced Design Features: 90 cutting angle, -10 radial and +7 axial rake angles for smooth cutting and optimal chip removal.
- Precision and Durability: 3 diameter, 1 arbor hole, and 2.00 overall length, with a nickel-plated body for corrosion resistance.
- See more on Amazon...
Versatile Applications: Ideal For Square Shoulder, Side, Slot, Helical, Ramping, And Pocket Milling In Various Materials Including Steels And Aluminum Alloys..
Precision And Durability: 3" Diameter, 1" Arbor Hole, And 2.00" Overall Length, With A Nickel-Plated Body For Corrosion Resistance..
Versatile Milling Applications: Suitable For Square Shoulder, Helical, Ramping, Slot, Side Milling, And Pocketing In Various Materials..
High-Performance Inserts: Equipped With 7 Apkt1604 Carbide Inserts Installed For Immediate Use, Offering Exceptional Cutting Efficiency..
High-Quality End Mill Holder: Cat40 1'' Diameter End Mill Holder Compatible With A Wide Range Of Machining Centers, Ensuring Robust Connection And Precision Alignment..
Cat-40 Tool Holder Compatibility: Specifically Designed For Seamless Integration With Cat-40 Spindle Machines, Enhancing Rigidity And Precision..
Optimized Cutting Parameters: Features -10° Radial Rake And +7° Axial Rake Angles For Enhanced Cutting Efficiency And Surface Finish..
Advanced Design Features: 90° Cutting Angle, -10° Radial And +7° Axial Rake Angles For Smooth Cutting And Optimal Chip Removal..
Precision Inserts Included: Equipped With 7 Apkt1604 Carbide Inserts Installed For High-Performance Face Milling Right Out Of The Box..
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 3.54 x 8.27 x 3.54 inches | Weight: 5.40 pounds
See On Amazon #10
Shars 3/4" NMTB 30 NMTB30 Shell Face Mill Holder Arbors .0004 202-5631 P)
Asin: B0C7D1XK5F | Ean: 0000120256318 | UPC: 000120256318
Features
- Shank Size: NMTB 30
- TIR (In.): 0.0004
- Drawbar Thread Size: 1/2x13UNC
- Arbor Diameter: 3/4
- Key Width for Face Mill Keyway: 0.31
- See more on Amazon...
Drawbar Thread Size: 1/2X13unc.
Key Width For Face Mill Keyway: 0.31.
Arbor Diameter: 3/4.
Tir (In.): 0.0004.
Brand: Shars | Manufacturer: Shars Tool
See On Amazon #11
JTR 3pcs 90 Degree BAP300R End Mill Holders Indexable Inserts Tool Holder with 10pcs APMT1135PDER Milling Inserts for Machining Steel, Cast Iron
Asin: B09671NRBK | Model: JTR | PartNumber: JTR | Ean: 0765895132495 | UPC: 765895132495
Features
- The holder made of 40CrMo , Important material ,solid hard ,High vibration-absorbing performance
- The holders supports high cutting,90 Cutting angle ,Screw down insert
- APMT1135 Miling inserts: For shoulder milling, face milling and slotting
- Design for :Steel /Titanium alloy /Stainless steel / Cast iron
- Improve the surface finish of the workpiece, offer long service time
- See more on Amazon...
Apmt1135 Miling Inserts: For Shoulder Milling, Face Milling And Slotting.
Improve The Surface Finish Of The Workpiece, Offer Long Service Time.
Design For :Steel /Titanium Alloy /Stainless Steel / Cast Iron.
The Holders Supports High Cutting,90° Cutting Angle ,Screw Down Insert.
Brand: JTR | Manufacturer: JTR
See On Amazon #12
GBJ 1" Shank R8 Face Milling Cutter Arbor End Mill Tool Holders withTPKN1603PDSKR Triangle Inserts Carbide Inserts Indexable Milling Inserts (Milling Cutter + Inserts + Screws and Wrench)
Asin: B0CMLJ1DKK | Model: R8-3T+TPKN1603 | PartNumber: R8-3T+TPKN1603 | Ean: 0728683117999 | UPC: 728683117999
Features
- TPKN1603PDSKR --Thickness:0.12 , blade length:0.58 , Radius 1/64,made of solid carbide with tin coated,good wear resistance,Yellow suitable for processing steel, Gray suitable for processing Steel, cast iron ,45# steel and non-ferrous materials;
- Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
- Thick AL2O3 coating extends the life of the inserts working in high temperature. The first choice for steel processing from finishing to rough machining.
- It has strong resistance to plastic deformation and edge strength.High-hardness processing, stable performance, sturdiness and durability.Used for turning and finishing on a wide range of materials
- Product list 1pcs R8-3T End Mill Tool Holder+3pcs TPKN inserts +3pcs screws+2pcs wrench
- See more on Amazon...
☞Thick Al2o3 Coating Extends The Life Of The Inserts Working In High Temperature. The First Choice For Steel Processing From Finishing To Rough Machining..
Product List：1Pcs R8-3T End Mill Tool Holder+3Pcs Tpkn Inserts +3Pcs Screws+2Pcs Wrench.
☞It Has Strong Resistance To Plastic Deformation And Edge Strength.High-Hardness Processing, Stable Performance, Sturdiness And Durability.Used For Turning And Finishing On A Wide Range Of Materials.
☞Material: Made Of Solid Carbide With Tin Coated, Offer Long Tool Life And Faster Cutting Speed, Low Friction Coefficient, Good Wear Resistance.
Brand: LAHDYFHOE | Manufacturer: GBJ AWFIU
See On Amazon #13
SHARS 1-1/2" NMTB 40 NMTB40 Shell Face Mill Holder Arbors .0004 202-5638 S)
Asin: B0845YJ2JW
Features
- Taper: NMTB 40
- Drawbar Thread: 5/8-11
- Bore: 1-1/2
- Shell Mill Range: 4 to 5
- Made from alloy steel harden to 54-60 HRc
- See more on Amazon...
Bore: 1-1/2".
Made From Alloy Steel Harden To 54-60 Hrc.
Shell Mill Range: 4 To 5".
Drawbar Thread: 5/8"-11.
Brand: Shars | Manufacturer: Shars
Weight: 6.00 pounds
See On Amazon #14
kimllier 3/4 Inch R8 Face Mill Holders Shank Shell Mill Arbor Adapter Slitting Saw Arbor 7/16 Inch - 20UNF Drawbar Thread Pull Tail Wire Fit for Milling Machine
Asin: B0B1ZZYVJP | Model: Does Not Apply | PartNumber: Does Not Apply
Features
- Shank Size: R8, Arbor Diameter: 3/4-inch, Range: 1-3/4 inch to 2 inch, Drawbar Thread Size: 7/16-20UNF
- Advantage: Hardened and ground throughout to assure maximum concentricity
- Features: The R8 Shank Shell Mill Arbor Adapter is milled finished to support a long time use
- Precision Manufacturing: Tool holder is made from drop forged alloy and heat treated to 56-58HRc, fine grinding of steel, efficient machining and durable
- Application: For holding saws or small cutters, R8 style slitting saw arbor replacement for machine
- See more on Amazon...
Features: The R8 Shank Shell Mill Arbor Adapter Is Milled Finished To Support A Long Time Use.
Application: For Holding Saws Or Small Cutters, R8 Style Slitting Saw Arbor Replacement For Machine.
Precision Manufacturing: Tool Holder Is Made From Drop Forged Alloy And Heat Treated To 56-58Hrc, Fine Grinding Of Steel, Efficient Machining And Durable.
Advantage: Hardened And Ground Throughout To Assure Maximum Concentricity.
Brand: kimllier | Manufacturer: kimllier
Dimensions: 1.97 x 6.50 x 1.97 inches
See On Amazon #15
Shank Indexable End Mill, MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide
Asin: B08QFH8GSP | Model: Ladieshow9gpr7ywk36 | PartNumber: Ladieshow9gpr7ywk36
Features
- Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life
- High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance
- High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters
- Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling
- Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools
- See more on Amazon...
High Speed: Face End Mills Have Better Cleanliness And More Stable Accuracy, And The Rotation And Milling Feed Rates Are 3 Times Faster Than Ordinary Milling Cutters.
Widely Used: Face Milling Cutter Is A Common Main Accessory For Milling Cnc Machine Tools, Fixture Milling Machines, Horizontal Boring Machines, Ordinary Boring And Milling Machines, Drilling Machines, Bench Drills And Small Machine Tools.
Machining Range: Face Cnc Milling Cutters Are Suitable For Precision Machining, Roughing, Flat And Step Machining And Are The Ideal Toolkit For Heavy Duty Cnc Milling.
High-Precision Machining: The Milling Cutter Kit Adopts High-Precision Machining Technology, And The Surface Adopts New Coating Technology, Which Has Good Oxidation Resistance And High Temperature Resistance.
Brand: Ladieshow | Manufacturer: Ladieshow
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #16
kimllier 1-1/4 Inch R8 Face Mill Holders End Mill Holder Shank Shell Mill Arbor Adapter 7/16 Inch - 20UNF Drawbar Thread Pull Tail Wire Fit for Bridgeport Machine
Asin: B0B212SNVQ | Model: Does Not Apply | PartNumber: Does Not Apply
Features
- Tool Holder Type: Face Mill Holder, Shank Size: R8
- Drawbar Thread Size: 7/16-20UNF, Arbor Diameter: 1-1/4, Shell Mill Range: 3 to 3-1/2
- Accuracy: Bottom contact surface between face mill and this tool holder is accuracy ground finished, the runout tolerance is within .0004inch from R8 shank to face mill arbor
- Accuracy Manufacturing: Tool holder is made from drop forged alloy and heat treated to 56-58HRc, fine grinding of steel, efficient machining and durable
- Features: Each key is milled finished and assemble into the tool holder with screw. The double-sided clamping key is not easy to shake left and right during cutting
- See more on Amazon...
Accuracy: Bottom Contact Surface Between Face Mill And This Tool Holder Is Accuracy Ground Finished, The Runout Tolerance Is Within .0004Inch From R8 Shank To Face Mill Arbor.
Features: Each Key Is Milled Finished And Assemble Into The Tool Holder With Screw. The Double-Sided Clamping Key Is Not Easy To Shake Left And Right During Cutting.
Accuracy Manufacturing: Tool Holder Is Made From Drop Forged Alloy And Heat Treated To 56-58Hrc, Fine Grinding Of Steel, Efficient Machining And Durable.
Drawbar Thread Size: 7/16-20Unf, Arbor Diameter: 1-1/4, Shell Mill Range: 3 To 3-1/2.
Brand: kimllier | Manufacturer: kimllier
Dimensions: 2.95 x 6.69 x 3.15 inches | Weight: 2.38 pounds
See On Amazon #17
Face Mill,Deosdum Mt3 Face Mill Mt3 Fmb22 Holder Extension 400R 50 22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts R8 Face Mill
Asin: B0BWYVL1SS
Features
- WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools
- WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools
- COATING TECHNOLOGY: The surface adopts new coating technology, which has good oxidation resistance and high temperature resistance, and can be used for a long time.
- PROCESSING RANGE: This MT3 FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material
- Brand New 100 Brand New And High Quality Face End Mill ,It Is A Perfect Choice If You Are In Need Of Such A Product.
- See more on Amazon...
Coating Technology: The Surface Adopts New Coating Technology, Which Has Good Oxidation Resistance And High Temperature Resistance, And Can Be Used For A Long Time..
Brand New 100 Brand New And High Quality Face End Mill ,It Is A Perfect Choice If You Are In Need Of Such A Product..
Processing Range: This Mt3 Fmb22 Holder Has Better Cleanness And More Stable Accuracy, Can Be Used For Plate Cutting, Harden Insert Used For Steel Material.
Wide Range Of Applications: Lathe Extension Rods Are The Main Accessories Commonly Used In Milling Cnc Machine Tools, Fixture Milling Machines, Horizontal Boring Machines, Ordinary Boring And Milling Machines, Drilling Machines, Bench Drills And Small Machine Tools.
Brand: Deosdum | Manufacturer: Deosdum
See On Amazon #18
3" 75 Indexable Face (Shell) Mill, 1" Arbor Hole Diameter, 5 Flute, with 5 pcs APKT1604 Carbide Inserts
Asin: B07B2JZSZK
Features
- Balanced milling cutter that offers less chatter compared to 90 face mills
- 3 Mill Diameter; 75 Lead Angle; Positive Rake; 2 Cutting Edges per Insert
- 1 Arbor Hole Diameter; 0.389 Keyway Width
- 1.952 Overall Height; 2.367 Hub Diameter
- Includes 5 APKT1604 Inserts; Screw-in Insert Holding
- See more on Amazon...
1" Arbor Hole Diameter; 0.389" Keyway Width.
Includes 5 Apkt1604 Inserts; Screw-In Insert Holding.
1.952" Overall Height; 2.367" Hub Diameter.
3" Mill Diameter; 75° Lead Angle; Positive Rake; 2 Cutting Edges Per Insert.
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #19
Face Mill Head, 4 Face Milling Tool, Aluminum Alloy with Coated Spiral Offset for APMT1204 Inserts for Metalworking Industry CNC, Face Mill Holders
Asin: B0CK2FH829 | Model: Marhynchusqv0chukx6n | PartNumber: Marhynchusqv0chukx6n
Features
- [Compact structure] The face milling cutter adopts a special helical offset design, which makes the insert groove and the insert tightly coupled, which enhances its rigidity and compression resistance, and makes the machining effect better.
- [Aluminum alloy] The face milling cutter head is made of aluminum alloy, which has high hardness and durability. It can reduce cutter wear during use, improve processing efficiency and prolong service life.
- [High efficiency] The face milling cutter head is designed with 4 flutes. The milling cutters have a compact structure and fine workmanship, which can reduce cutter wear and have stable performance. At the same time, the chip space is large, the chip removal is good, and the installation and processing are convenient and the processing effect is good. , will greatly improve your processing efficiency.
- [Coated] The of the cutter head adopts an excellent coating process, which has good oxidation resistance and high temperature resistance, and is more and wear-resistant than before, while improving its hardness and reducing the friction coefficient, making it more and increasing cutter life.
- [Metal Machining] This face milling cutter head adopts 4-flute design, compact structure and stable performance between milling cutters, suitable for APMT1204 inserts, widely used in metal finishing and roughing, and used in various CNC equipment.
- See more on Amazon...
[High Efficiency] The Face Milling Cutter Head Is Designed With 4 Flutes. The Milling Cutters Have A Compact Structure And Fine Workmanship, Which Can Reduce Cutter Wear And Have Stable Performance. At The Same Time, The Chip Space Is Large, The Chip Removal Is Good, And The Installation And Processing Are Convenient And The Processing Effect Is Good. , Will Greatly Improve Your Processing Efficiency..
[Metal Machining] This Face Milling Cutter Head Adopts 4-Flute Design, Compact Structure And Stable Performance Between Milling Cutters, Suitable For Apmt1204 Inserts, Widely Used In Metal Finishing And Roughing, And Used In Various Cnc Equipment..
[Coated] The Of The Cutter Head Adopts An Excellent Coating Process, Which Has Good Oxidation Resistance And High Temperature Resistance, And Is More And Wear-Resistant Than Before, While Improving Its Hardness And Reducing The Friction Coefficient, Making It More And Increasing Cutter Life..
[Aluminum Alloy] The Face Milling Cutter Head Is Made Of Aluminum Alloy, Which Has High Hardness And Durability. It Can Reduce Cutter Wear During Use, Improve Processing Efficiency And Prolong Service Life..
Brand: Marhynchus | Manufacturer: Marhynchus
See On Amazon #20
2 Inch Face Milling Cutter Aluminum KM12 50MM CNC End Milling Cutter Holder + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs SEHT1204 Carbide Inserts + 8mm Hexagon Wrench + T20 Wrench CNC Machine Tools
Asin: B08MYH3XX5 | Model: AL KM12 50-22 | PartNumber: AL KM12 50-22
Features
- Precision Design And Accurate Tool Position: The Precision Design Of Blade Position Ensures The Accuracy Of The Blade Position. After The Blade Is Installed, It Is Flat And Consistent With The Cutter Head, So As To Avoid Uneven Force On The Blade During Processing, And Easily Solve The Chatter Of Spring Knife
- High Quality Material Selection And Load Reduction: It Adopts Aviation Aluminum Alloy Raw Material, Which Is Light And Stable, Effectively Reduces The Spindle Load, Greatly Delays The Service Life Of Milling Machine, And Can Process Aluminum Alloy Mold Quickly
- Stable Performance Of Gold Plating Process: The Cutter Head Surface Adopts New Thin Coating Gold Plating Process, Which Has Good Oxidation Resistance, High Temperature Resistance And More Durable
- Insert The Tooth Sleeve To Avoid Sliding Wire: The Stainless Steel Tooth Sleeve Is Inserted In The Screw Tooth Position Of The Cutter Head, Which Can Effectively Prevent The Thread Sliding Problem Of The Cutter Head Screw Tooth
- Tight Seam, Strong Compression Force: Screw Offset Fastening Design, So That The Blade Position Slot And Blade Closely Fit, Processing Is Not Easy To Shake, Reduce Damage To The Machine Tool
- See more on Amazon...
Stable Performance Of Gold Plating Process: The Cutter Head Surface Adopts New Thin Coating Gold Plating Process, Which Has Good Oxidation Resistance, High Temperature Resistance And More Durable.
Tight Seam, Strong Compression Force: Screw Offset Fastening Design, So That The Blade Position Slot And Blade Closely Fit, Processing Is Not Easy To Shake, Reduce Damage To The Machine Tool.
Insert The Tooth Sleeve To Avoid Sliding Wire: The Stainless Steel Tooth Sleeve Is Inserted In The Screw Tooth Position Of The Cutter Head, Which Can Effectively Prevent The Thread Sliding Problem Of The Cutter Head Screw Tooth.
High Quality Material Selection And Load Reduction: It Adopts Aviation Aluminum Alloy Raw Material, Which Is Light And Stable, Effectively Reduces The Spindle Load, Greatly Delays The Service Life Of Milling Machine, And Can Process Aluminum Alloy Mold Quickly.
Brand: LingGan | Manufacturer: LingGan
Dimensions: 1.97 x 6.50 x 1.97 inches | Weight: 1.97 pounds
See On Amazon #21
Shars 2" 90 Degree Indexable Face Mill 10 PCS ZCC USA APKT1604 Carbide Inserts with CAT40 Tool Holder M
Asin: B0BKTQ1CKH | Ean: 0000820253716 | UPC: 000820253716
Features
- 2" 90 Degree Face Mill 5 Flute, 0.630" Depth of Cut
- CAT40 3/4 Face Mill Holder 1.37 Gage length with 0.0002 TIR
- 10 PCS Set APKT160408 PM YBG202 Carbide Insert semi finish
- Insert screws and wrench are included
- See more on Amazon...
10 Pcs Set Apkt160408 Pm Ybg202 Carbide Insert Semi Finish.
Insert Screws And Wrench Are Included.
Cat40 3/4" Face Mill Holder 1.37" Gage Length With 0.0002" Tir.
Brand: Shars | Manufacturer: Shars
See On Amazon #22
Shars BT 30 3/4 x 1.5" Shell Face Mill Holder Adapter CNC.0002" New 202-7544 P)
Asin: B0CDYM97CN | Ean: 0000620275444 | UPC: 000620275444
Features
- Max. RPM Balanced to: G6.3 15000
- TIR (Inch): 0.0002
- Drawbar Thread Size: M12 x 1.75
- Arbor Diameter: 3/4
- Arbor Screw Diameter: 0.56
- See more on Amazon...
Drawbar Thread Size: M12 X 1.75.
Arbor Screw Diameter: 0.56.
Arbor Diameter: 3/4.
Tir (Inch): 0.0002.
Brand: Shars | Manufacturer: Shars Tool
Weight: 2.00 pounds
See On Amazon #23
Lather End Milling Cutter, Mt2-Fmb22 Face Mill Holder with 400R50-22 CNC Lather End Milling Cutter T15 Wrench 10Pcs Apmt1604 Carbide for Heavy Duty CNC Milling
Asin: B07YDQHJGD | Model: Taidda7unawtk1ye | PartNumber: Taidda7unawtk1ye | Ean: 0711632077352 | UPC: 711632077352
Features
- ROBUST AND DURABLE: The face CNC milling cutters are made of carbide with high hardness and good impact resistance. The surface adopts new coating technology, which has good oxidation resistance and high temperature resistance, and can be used for a long time
- HIGH-SPEED MACHINING: The end mill has better cleanliness, more stable precision, high hardness, high strength, and is not easy to deform and damage. Rotation and milling feeds 3 times faster than normal milling cutters
- FACE MILL TYPES: Carbide End Mill, BAP400R-50-22 (End Mill), MT2-FMB22 (Face Mill Holder), APMT1604 (Carbide Insert), Ideal Toolkit for Heavy Duty CNC Milling
- MACHINING RANGE: Face CNC milling cutters are suitable for precision machining, rough machining, plane and step machining. The face milling cutter has high milling speed and machining efficiency, and the machined surface quality is also good
- WIDE RANGE OF USES: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools
- See more on Amazon...
Face Mill Types: Carbide End Mill, Bap400r-50-22 (End Mill), Mt2-Fmb22 (Face Mill Holder), Apmt1604 (Carbide Insert), Ideal Toolkit For Heavy Duty Cnc Milling.
Wide Range Of Uses: Face Milling Cutter Is A Common Main Accessory For Milling Cnc Machine Tools, Fixture Milling Machines, Horizontal Boring Machines, Ordinary Boring And Milling Machines, Drilling Machines, Bench Drills And Small Machine Tools.
Machining Range: Face Cnc Milling Cutters Are Suitable For Precision Machining, Rough Machining, Plane And Step Machining. The Face Milling Cutter Has High Milling Speed And Machining Efficiency, And The Machined Surface Quality Is Also Good.
High-Speed Machining: The End Mill Has Better Cleanliness, More Stable Precision, High Hardness, High Strength, And Is Not Easy To Deform And Damage. Rotation And Milling Feeds 3 Times Faster Than Normal Milling Cutters.
Brand: Taidda | Manufacturer: Taidda
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #24
2.5 Inch Face Milling Cutter Holder EMR 5R 63MM CNC end Milling Cutter + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs RPMW1003 Carbide Inserts + 8mm Hexagon Wrench + T15 Wrench CNC Machine Tools
Asin: B08BFSW83W | Model: EMR 5R63-22 + R8-FMB22 + RPMW1003MO | PartNumber: EMR 5R63-22 + R8-FMB22 + RPMW1003MO | Ean: 8424602304182
Features
- The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products.
- Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head.
- The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load.
- Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good.
- High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.
- See more on Amazon...
The All-Steel Cutter Body Of The Steel Milling Cutter Is Your Savior For The Main Shaft, Allowing You To Reduce The Load On The Processing Of The Load..
High-Hardness Treatment Strong And Durable, The Surface Of The Cutter Head Is Treated With A New Thin Coating Treatment Liquid For High-Hardness Treatment, And Has Good Acid Resistance..
Strict Wire Jointing, Strong Compression Force, Screw Offset Tightening Design, So That The Blade Position Groove And The Blade Closely Fit Together, The Rigidity Is Enhanced, And The Processing Effect Is Good..
Hardening And Hardening High-Precision Shock Resistance, Good Permeability, Resistance To Multiple Impacts, Good Low-Temperature Impact Toughness, Sturdiness And Durability, Which Can Increase The Service Life And Shock Resistance Of The Cutter Head..
Brand: LingGan | Manufacturer: LingGan
Dimensions: 2.48 x 6.69 x 2.48 inches
See On Amazon #25
SHARS 3/4" NMTB 40 NMTB40 Shell Face Mill Holder Arbors .0004 202-5635 S)
Asin: B084619THM
Features
- Taper: NMTB 40
- Drawbar Thread: 5/8-11
- Bore: 3/4
- Shell Mill Range: 1-3/4 to 2
- Made from alloy steel harden to 54-60 HRc
- See more on Amazon...
Bore: 3/4".
Made From Alloy Steel Harden To 54-60 Hrc.
Shell Mill Range: 1-3/4 To 2".
Drawbar Thread: 5/8"-11.
Brand: Shars | Manufacturer: Shars
Weight: 2.00 pounds
See On Amazon #26
Earl Diamond Super Heavy Duty R8 FMB22 7/16 Straight Shank Arbor 400R Face End Mill Cutter with 4Pcs APMT1604 Carbide Inserts (Outer Diameter of Cutter Head 50)
Asin: B07Y71MLXP | Model: R8 FMB22 7/16 | PartNumber: R8 FMB22 7/16
Features
- A T15 wrench.
- Excellent CNC machine tools set.
- A 2 inches R8-FMB22 face mill arbor.
- 4pcs carbide inserts packed in a box.
- A 400R 50MM CNC end milling cutter.
- See more on Amazon...
A 2 Inches R8-Fmb22 Face Mill Arbor..
A 400R 50Mm Cnc End Milling Cutter..
4Pcs Carbide Inserts Packed In A Box..
Excellent Cnc Machine Tools Set..
Brand: Earl Diamond | Manufacturer: Earl Diamond
Dimensions: 0.04 x 6.30 x 2.00 inches
See On Amazon #27
SHARS 1" NMTB 30 NMTB30 Shell Face Mill Holder Arbors .0004 202-5632 P)
Asin: B08462GZQJ
Features
- Taper: NMTB 30
- Drawbar Thread: 1/2-13
- Bore: 1
- Shell Mill Range: 2-1/4 to 2-3/4
- Made from alloy steel harden to 54-60 HRc
- See more on Amazon...
Bore: 1".
Made From Alloy Steel Harden To 54-60 Hrc.
Shell Mill Range: 2-1/4 To 2-3/4".
Drawbar Thread: 1/2"-13.
Brand: Shars | Manufacturer: Shars
Weight: 2.00 pounds
See On Amazon #28
R8 FMB32 7/16-20 Shank Face End Mill Arbor and 4"/100mm Cutting Diameter 6-Flute 400R 100-32-6T CNC Face End Milling Shell Cutter with 10Pcs APMT1604 Carbide Inserts and T15 Wrench
Asin: B0CJCG4WK4
Features
- Set includes: 1 x R8 FMB32 Arbor, 1 x 400R-100-32-6T Cutter, 1 x T15 Wrench, 10 x APMT1604 Carbide Inserts as pictured.
- Function: Machining planes, grooves, and cutting off workpieces on milling machines. Milling speed and processing efficiency are high, and the surface quality of the processing is also good. It is possible to add T parts with hard skin and hardened layers, which has obvious advantages in improving product quality and processing efficiency.
- High Quality: Made of steel with high hardness and high strength to ensure long service life, which can be used on CNC machines, suitable for plate cutting, hardness insert used for steel material.
- Good Performance: Milling rotary tool is screw locking, the chip large space, good chip removal, edge can fit a variety of materials. Body made of fine quality steel, good permeability,sturdiness and durability, resistance to multiple impacts,fine durability. Smooth surface, comfortable feeling, nice appearance.
- Widely Application: This shank face mill arbor set is designed for shoulder milling, face milling and slotting, mainly used for CNC machining centers, CNC engraving machines. It can also be installed on an ordinary milling machine to process some harder and less complex heat-treated materials.
- See more on Amazon...
High Quality: Made Of Steel With High Hardness And High Strength To Ensure Long Service Life, Which Can Be Used On Cnc Machines, Suitable For Plate Cutting, Hardness Insert Used For Steel Material..
Widely Application: This Shank Face Mill Arbor Set Is Designed For Shoulder Milling, Face Milling And Slotting, Mainly Used For Cnc Machining Centers, Cnc Engraving Machines. It Can Also Be Installed On An Ordinary Milling Machine To Process Some Harder And Less Complex Heat-Treated Materials..
Good Performance: Milling Rotary Tool Is Screw Locking, The Chip Large Space, Good Chip Removal, Edge Can Fit A Variety Of Materials. Body Made Of Fine Quality Steel, Good Permeability,Sturdiness And Durability, Resistance To Multiple Impacts,Fine Durability. Smooth Surface, Comfortable Feeling, Nice Appearance..
Function: Machining Planes, Grooves, And Cutting Off Workpieces On Milling Machines. Milling Speed And Processing Efficiency Are High, And The Surface Quality Of The Processing Is Also Good. It Is Possible To Add T Parts With Hard Skin And Hardened Layers, Which Has Obvious Advantages In Improving Product Quality And Processing Efficiency..
Brand: BestParts | Manufacturer: BestParts
See On Amazon #29
Eumtenr Heavy Duty R8 FMB22 7/16 Shank Face End Mill Cutte and 400R 50MM CNC End Milling Shell Cut with 4Pcs APMT1604 Carbide Inserts and T15 Wrench
Asin: B0C38YQP87 | Ean: 0736961707107 | UPC: 736961707107
Features
- Arbor Model: R8-FMB22, Milling Cutter Model: 400R-50-22-4F Carbide Inserts: APMT1604.
- Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
- High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
- For shoulder milling, face milling and slotting,7/16-20 thread on the draw bar.
- Package Includes: 1 x R8 FMB22 Arbor, 1 x 400R 50mm cut, 4 x APMT1604 Carbide Inserts, 1 x T15 Wrench.
- See more on Amazon...
High-Precision Machining: The Milling Cutter Kit Adopts High-Precision Machining Technology, And The Surface Adopts New Coating Technology, Which Has Good Oxidation Resistance And High Temperature Resistance..
Package Includes: 1 X R8 Fmb22 Arbor, 1 X 400R 50Mm Cut, 4 X Apmt1604 Carbide Inserts, 1 X T15 Wrench..
For Shoulder Milling, Face Milling And Slotting,7/16-20 Thread On The Draw Bar..
Sturdy And Durable: The End Mill Set Is Made Of Carbide Material, With High Hardness, High Strength, Not Easy To Deform And Damage, Good Impact Resistance And Long Service Life..
Brand: Eumtenr | Manufacturer: Eumtenr
See On Amazon #30
Accusize Industrial Tools Arbor: 1 1/2'', Range: 4''-5'', R8 Shank Shell Face Mill Arbor Adapter Holder for Bridgeport - 7/16''-20, Fg22-8096
Asin: B01ELV8O2O | Model: FG22-8096 | PartNumber: FG22-8096 | Ean: 0663566010472 | UPC: 663566010472
Features
- Arbor: 1 1/2", Range: 4"-5", R8 Shank Precision Shell End Mill Arbors FG22-8096
- For Bridgeport. Drawbar thread: 7/16-20
- Holds shell mills.
- Diameter of the bolt head: 1.87 inch / 47.5mm
- Please note that if the head of the bot is too big for your cutter, you may machine it to fix the issue.
- Designed for Bridgeport Machines: Matches perfectly with Bridgeport milling machines featuring a 7/16-20 drawbar thread for flawless integration.|
- Large Milling Operations: Capable of holding shell mills with diameters ranging from 4 to 5, ideal for large-scale milling projects.
- Superior Durability: Equipped with a robust 1-1/2 arbor and a 6.41 length, engineered for sustained reliability and performance.
- Secure and Stable: Features a 1.874 screw diameter and a 1.771 screw length, with a thread size of M:3/4-16UNF, ensuring a tight and stable tool connection.
- Precision and Efficiency: Designed to minimize vibration and enhance milling precision, significantly improving workpiece quality and machining efficiency.
- See more on Amazon...
Holds Shell Mills..
Precision And Efficiency: Designed To Minimize Vibration And Enhance Milling Precision, Significantly Improving Workpiece Quality And Machining Efficiency..
Large Milling Operations: Capable Of Holding Shell Mills With Diameters Ranging From 4" To 5", Ideal For Large-Scale Milling Projects..
Superior Durability: Equipped With A Robust 1-1/2" Arbor And A 6.41" Length, Engineered For Sustained Reliability And Performance..
Please Note That If The Head Of The Bot Is Too Big For Your Cutter, You May Machine It To Fix The Issue..
Designed For Bridgeport Machines: Matches Perfectly With Bridgeport Milling Machines Featuring A 7/16"-20 Drawbar Thread For Flawless Integration.|.
Diameter Of The Bolt Head: 1.87 Inch / 47.5Mm.
Secure And Stable: Features A 1.874" Screw Diameter And A 1.771" Screw Length, With A Thread Size Of M:3/4"-16Unf, Ensuring A Tight And Stable Tool Connection..
For Bridgeport. Drawbar Thread: 7/16"-20.
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 1.97 x 5.51 x 1.97 inches | Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search