Best Double End Countersinks - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Double End Countersinks on Amazon
- Drill America #7 Regular High Speed Steel Combined Drill Bit and Countersink, Dew Series
- Benchmark Abrasives 60-degree Countersink Premium Double Cut Tungsten Carbide Burr for Metal Wood We...
- Saipe 8Pcs HSS Center Drill Bits Set 60-Degree Angle Combined Countersink Drill Bit Tool High Speed ...
- FTG USA Adjustable Wood Countersink Drill Bit Set #4#6#8 with Tapered Drill Bits
- Benchmark Abrasives 90-degree Countersink Premium Double Cut Tungsten Carbide Burr for Metal Wood We...
- KEO 53510 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Roun...
- Vouyar Cobalt Steel Single End Countersink Drill Bit with Cobalt Coating Finish for Hard Metal Wood,...
- ColumPRO 4PCS Cobalt Single-End Countersink Chamfer Tool Set - Heavy-Duty M35 90-Degree Countersink ...
- KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Roun...
- KEO 53521 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Roun...
#1
Drill America #7 Regular High Speed Steel Combined Drill Bit and Countersink, Dew Series
Asin: B00FXBPHU4 | Model: DEWCCD7 | PartNumber: DEWCCD7 | Ean: 0887861060165 | UPC: 887861060165
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Used for producing center holes in work pieces which require machining between centers
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For Producing Center Holes In Work Pieces Which Require Machining Between Centers.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #2
Benchmark Abrasives 60-degree Countersink Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4" Shank (SJ-5)
Asin: B01HH0HWU6 | Ean: 0653341402523 | UPC: 653341402523
Features
- Benchmark Abrasives SJ-5 60-degree burrs are great for sharp angle areas, countersinking, counterboring, and chamfering bores with a 60-degree angle. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel).
- These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance.
- Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic.
- Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc.
- All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand.
- See more on Amazon...
Double-Cut Or Crosscut Carbide Burrs Are Used On Ferrous And Non-Ferrous Metals, Soft Steel, And Non-Metal Materials Such As Stone, Plastics, Hardwood, And Ceramic..
All Our Abrasive Products Are Made With Quality Materials And Exceed Ansi And Eu European Standards. We Trust In Delivering High-Quality Products To The End-User. Customer Satisfaction Is The Lifeline Of Our Brand..
Efficient Carbide Burrs Are Used In Various Industries Like Automotive, Transportation, Woodworking, Shipbuilding, Construction, Welding, Foundries, Fabrication, Etc..
These Carbide Burrs Are Made Of Tungsten Carbide Burr Die Grinder Bits And Will Start To Soften At Higher Temperatures, So Carbide Is Always The Best Choice For Long-Term Performance..
Brand: Benchmark Abrasives | Manufacturer: Benchmark Abrasives
See On Amazon #3
Saipe 8Pcs HSS Center Drill Bits Set 60-Degree Angle Combined Countersink Drill Bit Tool High Speed Steel Countersink Tools for Lathe Mill Metalworking (1/1.5/2/2.5/3/4/5/6mm)
Asin: B0C9TVZ8MG
Features
- Center Drill Bits Set Comes with 8pcs Center Drill Bits Set, they are in size 1/1.5/2/2.5/3/4/5/6mm, which can meet your different needs. Each drill has a double end and is ground with a standard 60 degree angle.
- HSS Material Made of high quality High Speed Steel for high hardness, wear resistance, not easy to break. Straight shank design is more suitable for many electric drills and drilling machines.
- 60 Degree Tip Angle Center drill bits accurate to 60 degree for producing center holds in components or work pieces with require machining between centers.
- Accurate Positioning This countersink bit drills an exact center hole in the material prior to turning and can also be used as a starter bit to obtain an accurate hole. Suitable for all standard centers!
- Lathe Metalworking The center drill bit set can work with lathe machines and most electronic drills to drill holes in Mold Steel, Cast Iron, Alum, Carbon Steel, Wood, Thread Mold and other tough material, it will improve the the efficiency of drilling.
- See more on Amazon...
【60 Degree Tip Angle】Center Drill Bits Accurate To 60 Degree For Producing Center Holds In Components Or Work Pieces With Require Machining Between Centers..
【Lathe Metalworking】The Center Drill Bit Set Can Work With Lathe Machines And Most Electronic Drills To Drill Holes In Mold Steel, Cast Iron, Alum, Carbon Steel, Wood, Thread Mold And Other Tough Material, It Will Improve The The Efficiency Of Drilling..
【Accurate Positioning】This Countersink Bit Drills An Exact Center Hole In The Material Prior To Turning And Can Also Be Used As A Starter Bit To Obtain An Accurate Hole. Suitable For All Standard Centers!.
【Hss Material】Made Of High Quality High Speed Steel For High Hardness, Wear Resistance, Not Easy To Break. Straight Shank Design Is More Suitable For Many Electric Drills And Drilling Machines..
Brand: Saipe | Manufacturer: Saipe
See On Amazon #4
FTG USA Adjustable Wood Countersink Drill Bit Set #4#6#8 with Tapered Drill Bits
Asin: B083H442TH | Model: FTG 468 | PartNumber: FTG 468 | Ean: 0850003437217 | UPC: 850003437217
Features
- Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set featuring 3 sizes drill bits with countersink #4 (7/64") #6 (9/64") #8 (11/64") Adjustable wood countersink, 1 Depth Stop Collar (3/8"), 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills
- Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood
- Countersink drill bit for wood with tapered drill bits High Speed Steel M2. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4 hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG468 counter sinker drill bit for wood
- THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set with logo brand name laser printed on each countersink bit hex shank. Tapered drill bit with countersink set FTG468. Counter-bore, and wood plugs size 3/8
- STORAGE CONTAINERS for this set available below on this page at section Make it a bundle. Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issue by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
- See more on Amazon...
Countersink Drill Bit For Wood With Tapered Drill Bits High Speed Steel M2. Wood Countersink Bit With Wider Flute Shape For Increased Chip Flow. Drill Countersink Set Has Logo Brand Name Laser Printed On Each Countersink Bit Quick Change 1/4" Hex Shank. Tapered Drill Bit With Countersink Set, Drill Bits, Professional Countersink Drill Bits Set With Countersinks For Wood. Ftg468 Counter Sinker Drill Bit For Wood.
Storage Containers For This Set Available Below On This Page At Section " Make It A Bundle". Counter Sinker Drill Bit Set Designed In New Jersey By Fair Trade Group Usa And Professionally Manufactured In China At Ftg Usa Specs. Analysis Report Issue By Anab Us Accredited Lab, Confirms That Drill Bits Set High Speed Steel Quality Countersink Bits Meet Desired Specs Of Hss M2 Grade 6542, Drill Bit Set Harder Than Hss 4241 And Hss 4341 Used In Other Similar Tapered Countersink Drill Bits.
Third-Party Tested By Us Accredited Lab - Hss M2 Grade 6542 Countersink Drill Bit For Wood With Tapered Drill Bits. Wood Countersink Bit With Wider Flute Shape For Increased Chip Flow. Drill Countersink Set With Logo Brand Name Laser Printed On Each Countersink Bit Hex Shank. Tapered Drill Bit With Countersink Set Ftg468. Counter-Bore, And Wood Plugs Size 3/8".
Wood Drill Bit Set With Counter Bore Chamfer Angle 82 Degree, Smooth Countersinking In Hard And Soft Wood, Tapered Holes For Screws. Adjustable Countersink Drill Bit With Quality Built Depth Adjustable Counter Bore Attaches To Flat On Shank With 2 Hex Screws For Controlled Pilot Hole Depth. Best Adjustable Wood Countersink Drill Bits Set Ideal For Woodworking. Countersink Tool Set Made With Countersink Bits For Wood.
Brand: FTG USA | Manufacturer: Fair Trade Group USA LLC
Dimensions: 0.30 x 4.00 x 0.30 inches | Weight: 1.00 pounds
See On Amazon #5
Benchmark Abrasives 90-degree Countersink Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4" Shank (SK-5)
Asin: B01HH0HY4U | Ean: 0653341402721 | UPC: 653341402721
Features
- Benchmark Abrasives SK-5 90-degree burrs are great for sharp angle areas, countersinking, counterboring, and chamfering bores with a 60-degree angle. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel).
- These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance.
- Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic.
- Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc.
- All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand.
- See more on Amazon...
Double-Cut Or Crosscut Carbide Burrs Are Used On Ferrous And Non-Ferrous Metals, Soft Steel, And Non-Metal Materials Such As Stone, Plastics, Hardwood, And Ceramic..
All Our Abrasive Products Are Made With Quality Materials And Exceed Ansi And Eu European Standards. We Trust In Delivering High-Quality Products To The End-User. Customer Satisfaction Is The Lifeline Of Our Brand..
Efficient Carbide Burrs Are Used In Various Industries Like Automotive, Transportation, Woodworking, Shipbuilding, Construction, Welding, Foundries, Fabrication, Etc..
These Carbide Burrs Are Made Of Tungsten Carbide Burr Die Grinder Bits And Will Start To Soften At Higher Temperatures, So Carbide Is Always The Best Choice For Long-Term Performance..
Brand: Benchmark Abrasives | Manufacturer: Benchmark Abrasives
See On Amazon #6
KEO 53510 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 5/16" Body Diameter
Asin: B00947BNFG | Model: 53510 | PartNumber: 53510 | Ean: 7241871119627
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.02 pounds
See On Amazon #7
Vouyar Cobalt Steel Single End Countersink Drill Bit with Cobalt Coating Finish for Hard Metal Wood, 90 Degree M35 HSS, 8MM Round Shank, 14MM Body Diameter
Asin: B0BVW1HKFZ | Model: KMCoCDB002 | PartNumber: KMCoCDB002
Features
- M35 Cobalt HSS: Super tough, resistant to wear, high thermal threshold. Designed for tackling tough materials like stainless steel and other high-performance alloys. Please ensure sufficient lubrication and cooling in extensive uses.
- Cobalt coating helps with wear and thermal. Please be reminded that the countersinking performance will not be impacted even if coatings are worn down. The wear and tear of coating is normal and the performance relies on hardness of the countersink bit itself.
- PRO compatibility for professional machinist and DIY enthusiasts: Round shank can be fitted with hand drills and bench drills. We recommend using bench drills for optimal results when working with hard alloys.
- The spiral flutes prevent chips from clogging, making your work more efficient.
- 90 degree cutting angle, countersinks 5 - 10 mm.
- See more on Amazon...
Pro Compatibility For Professional Machinist And Diy Enthusiasts: Round Shank Can Be Fitted With Hand Drills And Bench Drills. We Recommend Using Bench Drills For Optimal Results When Working With Hard Alloys..
90 Degree Cutting Angle, Countersinks 5 - 10 Mm..
The Spiral Flutes Prevent Chips From Clogging, Making Your Work More Efficient..
Cobalt Coating Helps With Wear And Thermal. Please Be Reminded That The Countersinking Performance Will Not Be Impacted Even If Coatings Are Worn Down. The Wear And Tear Of Coating Is Normal And The Performance Relies On Hardness Of The Countersink Bit Itself..
Brand: Vouyar | Manufacturer: Vouyar
See On Amazon #8
ColumPRO 4PCS Cobalt Single-End Countersink Chamfer Tool Set - Heavy-Duty M35 90-Degree Countersink Bits for Metal, Stainless Steel, Copper, Wood, Fiberboard,SAE 1/4"-3/4", 2-5, 5-10, 10-15, 15-20MM
Asin: B0CP22JJD4
Features
- Premium Quality Crafted from M35 Cobalt High Speed Steel with cobalt coating, our countersink drill bits boast unparalleled toughness, high temperature threshold and long-term durability, delivering consistently exceptional results.
- Impressive Performance Used after pre-drilling for screws or deburring holes as well as chamfering the edge of a part, they cut cleanly and are chatter-free. The cone tip assures accurate centering, also the enlarged spiral flute prevents chips from clogging and ejects chips rapidly. Designed to handle tough materials like stainless steel and other high-performance alloys.
- Versatile Application Our drill bits are compatible for use with a range of drilling machines, table drills, milling machines, cordless drills and impact drivers. Perfect for machinists, DIY enthusiasts and homeowners.
- Portable & Convenient Our countersink chamfer tools come with individual storage cases for easy portability. Say goodbye to lost bits and restless searches for the right tool.
- Comprehensive Set This set includes 4 drill bits in varying sizes, with each of the 2-5MM, 5-10MM, 10-15MM and 15-20MM countersink chamfer tools included, providing you with a complete package for all your drilling needs.
- See more on Amazon...
【Versatile Application】Our Drill Bits Are Compatible For Use With A Range Of Drilling Machines, Table Drills, Milling Machines, Cordless Drills And Impact Drivers. Perfect For Machinists, Diy Enthusiasts And Homeowners..
【Comprehensive Set】This Set Includes 4 Drill Bits In Varying Sizes, With Each Of The 2-5Mm, 5-10Mm, 10-15Mm And 15-20Mm Countersink Chamfer Tools Included, Providing You With A Complete Package For All Your Drilling Needs..
【Portable & Convenient】Our Countersink Chamfer Tools Come With Individual Storage Cases For Easy Portability. Say Goodbye To Lost Bits And Restless Searches For The Right Tool..
【Impressive Performance】Used After Pre-Drilling For Screws Or Deburring Holes As Well As Chamfering The Edge Of A Part, They Cut Cleanly And Are Chatter-Free. The Cone Tip Assures Accurate Centering, Also The Enlarged Spiral Flute Prevents Chips From Clogging And Ejects Chips Rapidly. Designed To Handle Tough Materials Like Stainless Steel And Other High-Performance Alloys..
Brand: ColumPRO | Manufacturer: ColumPRO
Dimensions: 1.61 x 7.50 x 4.70 inches
See On Amazon #9
KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
Asin: B00947BQ08 | Model: 53512 | PartNumber: 53512 | Ean: 0792971918766, 9145312036956, 5448095729591, 0746767308071 | UPC: 792971918766, 746767308071
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.00 Pounds
See On Amazon #10
KEO 53521 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter
Asin: B00947BZNQ | Model: 53521 | PartNumber: 53521
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.40 x 2.50 x 0.70 inches
See On Amazon #11
Combined Countersinks Drills Set Tool 5 Pack Center Drill Countersink Lathe Bit Mill Tooling Set Tip Angle 60 Degree Bits for Metal, Alloy, Copper, Iron, Aluminum, Titanium and Wood Working
Asin: B07WDWQWJC | Ean: 0824917782008 | UPC: 824917782008
Features
- Material and Features: High Speed Steel, high hardness, rustproof, solid, durable and excellent for use.
- Application: 60 countersink angle fits all standard centers, Used for centering work ends, where the work piece is to be revolved on machine centers.
- Durable and Resistance: Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance.
- Convenience: Easy to use and install, change bits fast which one-handed load and release. Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum and so on.
- Precisely Processing: Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking.
- See more on Amazon...
✔ Durable And Resistance: Center Drill Bit Is Made Of Hss High Speed Steel, With Extremely Sharp Blade, Low Consumption And Durable With Impact Resistance, Wear Resistance..
✔ Precisely Processing: Center And Spotting Drills Are Used To Make A Conical Hole For A Lathe Center In Order To Make A Starting Point For A Standard Twist Drill, Designed To Prevent The Twist Drill From Walking..
✔ Convenience: Easy To Use And Install, Change Bits Fast Which One-Handed Load And Release. Available For All Kinds Of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum And So On..
✔ Application: 60° Countersink Angle Fits All Standard Centers, Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers..
Brand: Rongon | Manufacturer: Rongon
Weight: 0.10 pounds
See On Amazon #12
amoolo Single End Countersink Bit, Cobalt Steel Countersink Drill Bit with TiAlN Coating Finish for Hard Metal, 82 Degree Point Angle, 3/8 Round Shank, 1/2 Body Diameter
Asin: B0B3HXQV2M | Model: ACSD1906022 | PartNumber: ACSD1906022 | Ean: 6974157522804
Features
- M35 Cobalt-Industrial M35 cobalt high speed steel countersink bit, harder than normal HSS countersink bits. Also has better wear-resistance and durability.
- TiAlN Coating-Aluminum Titanium Nitride coating with 35Gpa nano hardness ensures better performance on hard metals and higher speeds can be achieved. 800 max working temperature makes the service life much longer than other bits.
- Round Shank-Round shank allows use with most commonly drills in the market. Better performance on drill press. 82 degree point angle, 3/8 round shank, 1/2 body diameter.
- Hard Materials-Perfectly suitable for cutting through hard metals such as stainless steel, steel, sheet metal and cast iron as well as wood, aluminum alloy, plastic, acrylic sheet, fiberglass and other soft metals.
- Warranty Policy-If you are not fully satisfied for any reason, please contact us for 100% refund or replacement.
- See more on Amazon...
Round Shank-Round Shank Allows Use With Most Commonly Drills In The Market. Better Performance On Drill Press. 82 Degree Point Angle, 3/8” Round Shank, 1/2” Body Diameter..
Warranty Policy-If You Are Not Fully Satisfied For Any Reason, Please Contact Us For 100% Refund Or Replacement..
Hard Materials-Perfectly Suitable For Cutting Through Hard Metals Such As Stainless Steel, Steel, Sheet Metal And Cast Iron As Well As Wood, Aluminum Alloy, Plastic, Acrylic Sheet, Fiberglass And Other Soft Metals..
Tialn Coating-Aluminum Titanium Nitride Coating With 35Gpa Nano Hardness Ensures Better Performance On Hard Metals And Higher Speeds Can Be Achieved. 800℃ Max Working Temperature Makes The Service Life Much Longer Than Other Bits..
Brand: amoolo | Manufacturer: amoolo
Weight: 0.20 Pounds
See On Amazon #13
KEO 55531 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
Asin: B00947MJ9K | Model: 55531 | PartNumber: 55531
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 pounds
See On Amazon #14
5pcs Counterbore Drill Bits Set, 4 Flutes Straight End Mill Cutter HSS Countersink Slot End Mill Cutter M3-M8 for Copper Aluminum Cast Iron
Asin: B09JGRXC5X | Model: Hilitand294zn6rigp6521 | PartNumber: Hilitand294zn6rigp6521
Features
- High speed steel -- The milling cutter is made of HSS-AL super-hard high-speed steel, hardness: HRC65~68 , rust-proof, and can be used for a long time.
- High -- The cutting hole and the bottom hole of the tool have high alignment accuracy, reduce the time for changing tools, improve production efficiency and save mold making time.
- Professional tools -- End milling cutter is a special production tool, mainly used to cut the head of this hole allowing bolts or screws.
- Size -- Boot x Blade Diameter x Shank Diameter x Full Length: M3=3.2 x 5.9 x 6 x 45mm, M4=4.2 x 7.4 x 6 x 48mm ,M5=5.2 x 8.9 x 6 x 51mm, M6=6.2 x 10.4 x 8 x 58mm, M8=8.2 x 13.4 x 12 x 67mm.
- Application -- It can be processed directly or finely processed to the heat treatment mold. Suitable for grinding copper, aluminum, steel, cast iron, etc., usually used for assembling on a milling machine.
- See more on Amazon...
Professional Tools -- End Milling Cutter Is A Special Production Tool, Mainly Used To Cut The Head Of This Hole Allowing Bolts Or Screws..
Application -- It Can Be Processed Directly Or Finely Processed To The Heat Treatment Mold. Suitable For Grinding Copper, Aluminum, Steel, Cast Iron, Etc., Usually Used For Assembling On A Milling Machine..
Size -- Boot X Blade Diameter X Shank Diameter X Full Length: M3=3.2 X 5.9 X 6 X 45Mm, M4=4.2 X 7.4 X 6 X 48Mm ,M5=5.2 X 8.9 X 6 X 51Mm, M6=6.2 X 10.4 X 8 X 58Mm, M8=8.2 X 13.4 X 12 X 67Mm..
High -- The Cutting Hole And The Bottom Hole Of The Tool Have High Alignment Accuracy, Reduce The Time For Changing Tools, Improve Production Efficiency And Save Mold Making Time..
Brand: Hilitand | Manufacturer: Hilitand
Weight: 0.66 pounds
See On Amazon #15
KEO 53513 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter
Asin: B00947BR7A | Model: 53513 | PartNumber: 53513 | Ean: 0370121674221 | UPC: 370121674221
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 0.02 pounds
See On Amazon #16
KEO 53511 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter
Asin: B00947BOYQ | Model: 53511 | PartNumber: 53511
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.40 x 1.80 x 0.40 inches | Weight: 0.11 pounds
See On Amazon #17
Drillco 7000A Series Magnum Solid Carbide Bur, Double Cut, Cylindrical Flat End, 1/4" Shank Diameter, 1/2" Head Diameter, 1" Cutting Length (Pack of 1)
Asin: B00EW0K43W | Model: 7A132BDC | PartNumber: 7A132BDC | Ean: 0045997294216 | UPC: 045997294216
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- For deburring, interior contour work
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For Deburring, Interior Contour Work.
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: Drillco | Manufacturer: Drillco Cutting Tools
Dimensions: 0.50 x 3.25 x 0.50 inches
See On Amazon #18
Countersink Drill Bit Set, 5pc, 1/4" Hex Shank, 82 Degree Countersink Holes for Screws to Sit Flush or Under The Surface of Metal Wood Plastic, Sizes 1/4, 3/8, 1/2, 5/8, 3/4 Inches with Storage Case
Asin: B0CYM2WKW7
Features
- VERSATILE SET: Contains 5 high-quality Countersink Drill Bit Set with 82-degree countersink angle in common sizes in 1/4 3/8 1/2 5/8 3/4 for drilling various materials like wood, metal, plastic and more
- PRECISE COUNTERSINKING: Sharp cutters with 5 flutes and precise countersink angle allow for fast and accurate countersinking in a variety of applications to cleanly recess screws and bolts
- QUICK CHANGE SHANK: Convenient 1/4 quick change hex shank for easy attachment to drill chucks without additional adaptors fits most handheld and stationary drills and more tool
- PROTECTIVE STORAGE CASE: Durable case keeps bits organized and protected from damage when not in use for long-lasting performance and enhances transport convenience
- SUPERIOR CONSTRUCTION: High quality HSS alloy construction and heat treatment process with Titanium coating delivers maximum hardness and durability for prolonged use on repetitive drilling and countersinking jobs; please oil the bit after every use
- See more on Amazon...
Quick Change Shank: Convenient 1/4" Quick Change Hex Shank For Easy Attachment To Drill Chucks Without Additional Adaptors Fits Most Handheld And Stationary Drills And More Tool.
Superior Construction: High Quality Hss Alloy Construction And Heat Treatment Process With Titanium Coating Delivers Maximum Hardness And Durability For Prolonged Use On Repetitive Drilling And Countersinking Jobs; Please Oil The Bit After Every Use.
Protective Storage Case: Durable Case Keeps Bits Organized And Protected From Damage When Not In Use For Long-Lasting Performance And Enhances Transport Convenience.
Precise Countersinking: Sharp Cutters With 5 Flutes And Precise Countersink Angle Allow For Fast And Accurate Countersinking In A Variety Of Applications To Cleanly Recess Screws And Bolts.
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #19
KEO 53518 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16" - 5/8" Head Diameter
Asin: B00947BWDO | Model: 53518 | PartNumber: 53518
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- 82 degree angle
- Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action
- Made in Great Britain
- See more on Amazon...
82 Degree Angle.
Made In Great Britain.
Straight Shank, Cnc Precision Cam Ground, M35 Cobalt, Chatter-Free Cutting Action.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 pounds
See On Amazon #20
KEO 53524 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 3/4" Body Diameter
Asin: B00947C3Y6 | Model: 53524 | PartNumber: 53524
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.10 pounds
See On Amazon #21
1/8"x3/8" Carbide Tipped Countersink Drill Bits with Low Friction Depth Stop, 1/4" Quick Change Hex Shank Countersink Drill with Replaceable HSS Pilot Drill Bit for Wood, Plastic, Woodworking
Asin: B0CF46QFC1
Features
- [Carbide tipped]: Easier, Cleaner and more Durable than HSS.
- [Free Spinning Collar]: No surface scratches and no marrings.
- [Quick release]: Quick release Hex shank. No Wobble.
- [New Features]: Both the blade and the drill bit are replaceable. Try a few holes to make sure it's your desired depth and hole diameter. Once set, you'll get repeatable countersinking.
- [Wide Applications]: suitable for MDF, Plywood, Non-Ferrous, Chipboard, drywall, woodworking.
- See more on Amazon...
[Quick Release]: Quick Release Hex Shank. No Wobble..
[Wide Applications]: Suitable For Mdf, Plywood, Non-Ferrous, Chipboard, Drywall, Woodworking..
[New Features]: Both The Blade And The Drill Bit Are Replaceable. Try A Few Holes To Make Sure It's Your Desired Depth And Hole Diameter. Once Set, You'll Get Repeatable Countersinking..
[Free Spinning Collar]: No Surface Scratches And No Marrings..
Brand: Generic | Manufacturer: WS
Dimensions: 2.00 x 3.00 x 2.00 inches
See On Amazon #22
HHIP 2001-0038 1/2-1-3/4 Inch Indexable Countersink & Chamfer Tool, 82 Degree
Asin: B00N41EK5I | Model: 2001-0038 | PartNumber: 2001-0038 | Ean: 0769053004914, 0076905300491 | UPC: 076905300491, 769053004914
Features
- Cutter Min-Maximim 1/2~1-3/4; Shank Diameter 1/2
- Use Insert SCMT432; Insert Screw MLD-M50
- Deburr and countersink large diameter holes
- Positive rake for smooth cutting without chatter.; TIN coated REPLACEMENT CARBIDE INSERTS (TCMT221) (Item 6042-0022), (TCMT32.51) (Item 6004-7031), (SCMT 432) (Item 6004-3432)
- See more on Amazon...
Deburr And Countersink Large Diameter Holes.
Positive Rake For Smooth Cutting Without Chatter.; Tin Coated Replacement Carbide Inserts (Tcmt221) (Item 6042-0022), (Tcmt32.51) (Item 6004-7031), (Scmt 432) (Item 6004-3432).
Use Insert Scmt432; Insert Screw Mld-M50.
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 3.00 x 3.00 x 8.00 inches | Weight: 0.00 pounds
See On Amazon #23
Microstop Countersink Kit with No Mar End Cap and 4 Piece Cutter Set #12, 21, 30, 40 Cutters
Asin: B0BSZN9ZCR | Model: TC-13040-SET | PartNumber: TC-13040-SET
Features
- Microstop countersink with no-mar end. Depth adjustable in 0.001
- Attaches to any drill with a 1/4 chuck or larger.
- Uses standard 1/4-28 threaded cutters up to 1/2 in diameter.
- Countersink bits sold seperatly
- Bits are 3 fluted and Made from high speed steel with a 1/4x28 threaded shank.
- Note: Cannot be used for steel only aluminum and soft metals.
- See more on Amazon...
Uses Standard 1/4-28 Threaded Cutters Up To 1/2″ In Diameter..
Bits Are 3 Fluted And Made From High Speed Steel With A 1/4X28 Threaded Shank..
Note: Cannot Be Used For Steel – Only Aluminum And Soft Metals..
Countersink Bits Sold Seperatly.
Attaches To Any Drill With A 1/4″ Chuck Or Larger..
Brand: Wicks Aircraft | Manufacturer: Wicks Aircraft and Motorsports
Dimensions: 1.00 x 4.00 x 1.00 inches
See On Amazon #24
Countersink Drill Bit Set, 3pcs Single Flute 90 Degree Edge Chamfer Chamfering Tool End Mill Cutter Countersink Drill Bits Kit 3/8 1/2 3/4
Asin: B07VWDP7LL | Ean: 0824917583230 | UPC: 824917583230
Features
- The flute countersink drill bit set is made from standard high carbon steel and super hard titanium coated bits.
- The countersink drill bits set with titanium coating are very sharp, with a high circular machining accuracy and durability.
- The high-quality countersink drill bits can remove burrs well without leaving scratches.
- Great for sinking 90 degree countersink bit holes into wood and soft metals countersunk screws and fixings.
- 3 Flute 90 degree bits great for processing metal and some non-metallic materials, such as carbon steel, thin iron plate, insulation board, PVC board, aluminum, soft and hard wood, plastic and so on.
- See more on Amazon...
▲The High-Quality Countersink Drill Bits Can Remove Burrs Well Without Leaving Scratches..
▲3 Flute 90 Degree Bits Great For Processing Metal And Some Non-Metallic Materials, Such As Carbon Steel, Thin Iron Plate, Insulation Board, Pvc Board, Aluminum, Soft And Hard Wood, Plastic And So On..
▲Great For Sinking 90 Degree Countersink Bit Holes Into Wood And Soft Metals Countersunk Screws And Fixings..
▲The Countersink Drill Bits Set With Titanium Coating Are Very Sharp, With A High Circular Machining Accuracy And Durability..
Brand: Rongon | Manufacturer: Rongon
Weight: 0.13 pounds
See On Amazon #25
KEO 55051 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
Asin: B00947DAB6 | Model: 55051 | PartNumber: 55051 | Ean: 0735329550515 | UPC: 735329550515
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 3.00 x 1.20 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #26
KEO 55817 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 100 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 1/2" Body Diameter
Asin: B00947XZ0C | Model: 55817 | PartNumber: 55817
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
First Available: 11/25/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.10 pounds
See On Amazon #27
KEO 55794 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter
Asin: B00947W3DW | Model: 55794 | PartNumber: 55794
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 2.70 x 0.70 x 0.70 inches | Weight: 0.05 Pounds
See On Amazon #28
Aracombie 6 Pack 3 Flute 90 Degree Countersink Drill Bit Set, Titanium HSS Chamfering Tool Set Metric End Mill Cutter Bits, Deburring Chamfering Bit for Metal, Wood, Aluminum, Stainless Steel
Asin: B09XTNBRJF | Model: AST220413-602 | PartNumber: AST220413-602
Features
- Package Contains: 6 x HSS Countersink Drill Bits, 6 different sizes of countersink drill bit can meet your needs. Metal Countersink Bit Size: 0.81 inch / 20.5mm, 0.65 inch / 16.5mm, 0.49 inch / 12.4mm, 0.41 inch / 10.4mm, 0.33 inch / 8.3mm, 0.25 inch / 6.3mm. Three-blade design, cutting faster.
- Wide Range of Application: The metric countersink drill bit can meet your needs for drilling holes, can drilling, chamfering, deburring on wood, plastic, pvc, aluminum, copper, stainless steel and other soft materials(hardness 25 degrees).
- Cost-Effective: The chamfering tool set can be reused for a long time. A set contains 6pcs chamfering tool bits, which is very suitable for woodworking, DIY enthusiasts, and craftsmen to buy and use.
- Material: 90 degree countersink set is made of high quality HSS, the surface is titanium plated, which is more sharp and durable. This drill countersink set is very suitable for use on various common drilling rigs.
- After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please feel free to contact us, and we will provide you with solutions as soon as possible .
- See more on Amazon...
Cost-Effective: The Chamfering Tool Set Can Be Reused For A Long Time. A Set Contains 6Pcs Chamfering Tool Bits, Which Is Very Suitable For Woodworking, Diy Enthusiasts, And Craftsmen To Buy And Use..
After-Sales Guarantee: Aracombie Has A 24-Hour Human Customer Service. If You Have Any Questions Before Purchasing Or Are Not 100% Satisfied With The Product, Please Feel Free To Contact Us, And We Will Provide You With Solutions As Soon As Possible ..
Material: 90 Degree Countersink Set Is Made Of High Quality Hss, The Surface Is Titanium Plated, Which Is More Sharp And Durable. This Drill Countersink Set Is Very Suitable For Use On Various Common Drilling Rigs..
Wide Range Of Application: The Metric Countersink Drill Bit Can Meet Your Needs For Drilling Holes, Can Drilling, Chamfering, Deburring On Wood, Plastic, Pvc, Aluminum, Copper, Stainless Steel And Other Soft Materials(Hardness ≤ 25 Degrees)..
Brand: Aracombie | Manufacturer: Aracombie
See On Amazon #29
3 Pack Countersink Drill Bit Set #10#12#16, 3in1 Woodworking Counterbore Hole Saw Drill Bits, Depth Adjustable M2 Pilot Drill Bits, 82-Degree Chamfer, 1/4"Hex Shank, with 1 Allen Wrench
Asin: B0CQW82Y6V
Features
- 3in1 Countersink Drill Bit Set Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with or below the surface of a material.
- Meet All Your Needs 3 packs of Countersink drill bits assortment in size#10 (1/8), #12 (9/64), and #16 (3/16) for perfect centered Screws Holes in both Soft and Hard Wood.
- Easy To Use 3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4 Hex Shanks with groove for quick size changes without bit slipping, compatible with most electric drills and tools.
- Drilling Depth Adjustable Working length of the pilot drill bit is adjustable for precise depth control; hex wrenches included for changing or tightening the pilot drill bits.
- Compatible with More Materials Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard wood, soft wood, plywood, plastic; Please use a drill bit one size smaller in soft wood.
- See more on Amazon...
Easy To Use–3 Sharp Edged 82-Degree Chamfer Design Counter Sink Bits Built With 1/4" Hex Shanks With Groove For Quick Size Changes Without Bit Slipping, Compatible With Most Electric Drills And Tools..
Compatible With More Materials – Pilot Bits Are Made Of High Quality M2 Steel, Countersink Bits Make Of High Carbon Steel, Able To Drill In Hard Wood, Soft Wood, Plywood, Plastic; Please Use A Drill Bit One Size Smaller In Soft Wood..
Drilling Depth Adjustable– Working Length Of The Pilot Drill Bit Is Adjustable For Precise Depth Control; Hex Wrenches Included For Changing Or Tightening The Pilot Drill Bits..
Meet All Your Needs–3 Packs Of Countersink Drill Bits Assortment In Size#10 (1/8"), #12 (9/64"), And #16 (3/16") For Perfect Centered Screws Holes In Both Soft And Hard Wood..
Brand: DECKRKAT | Manufacturer: DECKRKAT
See On Amazon #30
KEO 53530 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 5/16" Body Diameter
Asin: B00948QTWM | Model: 53530-TiN | PartNumber: 53530-TiN
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
First Available: 05/15/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search