Best Cut-Off Wheels - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Cut-Off Wheels on Amazon
- Truswe Cut Off Wheels 52 Pack,4 1/2 Inch,0.45 USD/Pack,Metal and Stainless Steel Cutting Wheel for A...
- 3M 87461, Silver Cut-Off Wheel, 87461, T1, 4 in x .035 in x 3/8 in, Pack of 25
- DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack (DW8062B5)
- Benchmark Abrasives 6" Aluminum Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel .045"...
- SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2" x 3/64" x 7/8" for Metal & Stainless Ste...
- Diamond Cutting Wheel 4-1/2 Inch (3PCS) with 7/8" Arbor Hole, Metal Cut Off Disc with 5000+ Cuts on ...
- PEGATEC Cut Off Wheels 50 Pack, Quality Thin 4 1/2 x0.04x7/8 inch Cutting Disc, Metal & Stainless St...
- Cut Off Wheels 4-1/2", PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5 Metal & Stainless Steel Fast C...
- DeWalt DW8062 4-1/2"x.045"x7/8" Metal Angle Grinder Thin Cutoff Wheel, 10 Pack
- 55 Pack Cut Off Wheels Industrial Grade 4 1/2 Cut Off Wheel, Ultra Thin 4-1/2" x 3/64" x 7/8" Cuttin...
#1
Truswe Cut Off Wheels 52 Pack,4 1/2 Inch,0.45 USD/Pack,Metal and Stainless Steel Cutting Wheel for Angle Grinder,Ultra Thin Cut-Off Wheel Cutting Disc (52 PCS 4-1/2 x .045 x 7/8 inch Cut Off Wheels)
Asin: B0956S39GC | Model: CUTTING DISC | PartNumber: CUTTING DISC | Ean: 0860012114900, 0788505695579 | UPC: 860012114900, 788505695579
Features
- PERFECT SIZE Perfectly compatible with all 4-1/2 inch(115mm) angle grinders with 7/8 inch(22.2mm) arbor. Thickness:0.045 inch(1.2mm). Operating up to 13,300 RPM.
- PRECISE AND QUICKLY 0.045 inch ultra thin design for fast burr free and precise cutting perforamce with minimal material loss.
- SAFETY - AVOID WHEEL SHATTER Metal cutting discs are made of aluminum oxide grains. More safe than other wheels that may shatter or prematurely wear. Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
- DURABLE Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting longer, faster and reliably than other wheels that may shatter or prematurely wear.
- MULTIPLE UESES Cutting discs are designed for hard and continuous use on all metal, fiberglass, iron, plastic, steel and stainless steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing and other ferrous metals for aggressive cutting action.
- See more on Amazon...
🦾【Safety - Avoid Wheel Shatter】Metal Cutting Discs Are Made Of Aluminum Oxide Grains. More Safe Than Other Wheels That May Shatter Or Prematurely Wear. Wear All Applicable Safety Gear When Using These Discs (Eyes/Ears/Face/Hands/Body/Etc)..
🔩【Multiple Ueses】Cutting Discs Are Designed For Hard And Continuous Use On All Metal, Fiberglass, Iron, Plastic, Steel And Stainless Steel Parts Including Rebar, Steel Pipe, Structural & Galvanized Steel, Sheet Metal, Structural Tubing And Other Ferrous Metals For Aggressive Cutting Action..
🔧【Durable】Bonded With Corundum And White Alundum Grain And Reinforced By Double Fiberglass Mesh, These Cutting Discs Perform Much More Aggressive Cutting Longer, Faster And Reliably Than Other Wheels That May Shatter Or Prematurely Wear..
⚙️【 Precise And Quickly】0.045 Inch Ultra Thin Design For Fast Burr Free And Precise Cutting Perforamce With Minimal Material Loss..
Brand: Truswe | Manufacturer: Truswe
Dimensions: 0.10 x 4.50 x 4.50 inches
See On Amazon #2
3M 87461, Silver Cut-Off Wheel, 87461, T1, 4 in x .035 in x 3/8 in, Pack of 25
Asin: B078F5NY4W | Model: 87461 | PartNumber: 87461 | Ean: 0051125874618 | UPC: 051125874618
Features
- GREAT PERFORMANCE AND VALUE Designed for high-performance metal cutting while helping reduce your abrasive spend
- DELIVERS A FAST, CONSISTENT CUT Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity
- LONG LASTING Exceptional durability for extended wheel life
- CUTS A VARIETY OF METALS Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more
- USED IN MANY INDUSTRIES Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication
- See more on Amazon...
Long Lasting – Exceptional Durability For Extended Wheel Life.
Used In Many Industries – Quickly Cuts Through Metal Pipes, Tubes, Flat Sheets And More In Shipbuilding, Rail, And General Metal Fabrication.
Cuts A Variety Of Metals – Designed To Easily Cut Through Carbon Steel, Stainless Steel, Mild Steel, Aerospace Alloys And More.
Delivers A Fast, Consistent Cut – Ceramic 3M Precision-Shaped Grain Cuts Exceptionally Fast, Helping Increase Productivity.
First Available: 02/01/2018
Brand: 3M | Manufacturer: 3M
Dimensions: 0.13 x 3.00 x 4.00 Inches | Weight: 0.13 pounds
See On Amazon #3
DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack (DW8062B5)
Asin: B005B8LZCI | Model: DW8062B5 | PartNumber: DW8062B5 | Ean: 0028877525877 | UPC: 028877525877
Features
- Thin .045" wheel design for fast burr free cutting
- Proprietary aluminum oxide grain combination for aggressive cutting action
- Proprietary Material Mix ensures durable long life wheels
- 2 full sheets of fiberglass for durability and safety
- Product Image may vary
- See more on Amazon...
Proprietary Material Mix Ensures Durable Long Life Wheels.
Product Image May Vary.
2 Full Sheets Of Fiberglass For Durability And Safety.
Proprietary Aluminum Oxide Grain Combination For Aggressive Cutting Action.
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 0.05 x 4.50 x 4.50 inches | Weight: 0.02 pounds
See On Amazon #4
Benchmark Abrasives 6" Aluminum Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel .045" Thick 7/8" Arbor, Angle Grinder Wheel, Grinder Cutting Wheel - 25 Pack
Asin: B008KYUVCK | Model: BM-CO6001 | PartNumber: BM-CO6001 | Ean: 7535001771732, 0728028210811 | UPC: 728028210811
Features
- Benchmark Abrasives metal cutting wheel with a 6" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.
- Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.
- Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (11000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.
- The ideal grinding wheel support angle and die grinders, high-speed saws, stationary saws, and chop saws. Made of high-speed steel material for solidity and efficient cutting.
- All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand.
- See more on Amazon...
Professional Cut-Off Wheels Are Suitable For Various Cutting Operations On Stainless Steel, Steel, Aluminum, And Various Other Metals. This Highly Efficient Cutting Wheel Delivers Smooth Cuts (11000 Rpm) And Lower Vibration During Operations. It Ensures A High Cutting Rate At A Lower Cost..
All Of Our Abrasive Products Are Made With Quality Materials And Exceed Both Ansi And Eu European Standards. We Trust In Delivering High-Quality Products To The End-User. Customer Satisfaction Is The Lifeline Of Our Brand..
The Ideal Grinding Wheel Support Angle And Die Grinders, High-Speed Saws, Stationary Saws, And Chop Saws. Made Of High-Speed Steel Material For Solidity And Efficient Cutting..
Type 1 Cutting Wheels Are Completely Flat And Suitable For Grinding Operations. They Provide Consistent Sharp, Burr-Free Cutting With No Loss Of Hardness..
Brand: Benchmark Abrasives | Manufacturer: Benchmark Abrasives
Dimensions: 6.00 x 6.00 x 0.05 Inches | Weight: 3.10 Pounds
See On Amazon #5
SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2" x 3/64" x 7/8" for Metal & Stainless Steel, Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting
Asin: B09DYQD55R | Model: A-0100007 | PartNumber: A-0100007
Features
- Size 4-1/2-Inch x .047-Inch x 7/8-Inch
- Performance This is for a pack of 50 pieces of our cutting wheels Thin 0.045 cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S
- Advantage Thin .045-Inch wheel design for fast burr free cutting Proprietary aluminum oxide grain combination for aggressive cutting action
- Material Proprietary aluminum oxide grain for long life and fast cutting.double fiberglass mesh reinforced for further safety and durability
- Safety tips Please use all necessary protective gear when you use these cutting discs.If there is any problem with the product, please contact us to help you solve the after-sales problem.
- See more on Amazon...
【Advantage】Thin .045-Inch Wheel Design For Fast Burr Free Cutting Proprietary Aluminum Oxide Grain Combination For Aggressive Cutting Action.
【Safety Tips】Please Use All Necessary Protective Gear When You Use These Cutting Discs.If There Is Any Problem With The Product, Please Contact Us To Help You Solve The After-Sales Problem..
【Material】Proprietary Aluminum Oxide Grain For Long Life And Fast Cutting.Double Fiberglass Mesh Reinforced For Further Safety And Durability.
【Performance】This Is For A Pack Of 50 Pieces Of Our Cutting Wheels Thin 0.045" Cutting Wheel Design For Fast Burr Free Cutting. Perfectly Compatible With All 4-1/2 Angle Grinders With 7/8-Inch Arbor, Operating Up To 13,300 Rpm And 80M/S.
Brand: SALI | Manufacturer: SALI
Dimensions: 0.05 x 4.53 x 4.53 Inches
See On Amazon #6
Diamond Cutting Wheel 4-1/2 Inch (3PCS) with 7/8" Arbor Hole, Metal Cut Off Disc with 5000+ Cuts on Rebar, Steel, Iron and INOX
Asin: B0C6LG9KFQ | Model: JSJP-005 | PartNumber: JSJP-005
Features
- IDEAL SIZE With a diameter of 4.5" (115mm), segments thickness of .068" (1.73mm), arbor hole of 7/8" (22.23mm), and reducer washer of 16mm (5/8"), reducer washer of 20mm (4/5"), our blade is the perfect size for your cutting needs.
- PRECISE METAL CUTTING Achieve accurate, chip-free cuts with our diamond metal cut off disc. Its upgraded blade features a diamond high manganese steel substrate and new brazing process for longer service life, high temperature resistance, and low noise.
- SHARP BLADE WildBossy diamond cutting blade cuts fast and straight with uniform grinding force, good flatness, and less chips. It's also more durable than other blades.
- EASY TO INSTALL AND USE The diamond cutting wheel is the perfect angle grinder cutting disc for cutting normal steel in structures, metal pipes, and galvanized steel.
- VERSATILE With a metal cutting blade designed for toughness and precision, this cutoff wheel is ideal for use on rebar, steel, iron and INOX.
- See more on Amazon...
✅【Sharp Blade】Wildbossy Diamond Cutting Blade Cuts Fast And Straight With Uniform Grinding Force, Good Flatness, And Less Chips. It's Also More Durable Than Other Blades..
✅【Versatile】With A Metal Cutting Blade Designed For Toughness And Precision, This Cutoff Wheel Is Ideal For Use On Rebar, Steel, Iron And Inox..
✅【Easy To Install And Use】The Diamond Cutting Wheel Is The Perfect Angle Grinder Cutting Disc For Cutting Normal Steel In Structures, Metal Pipes, And Galvanized Steel..
✅【Precise Metal Cutting】Achieve Accurate, Chip-Free Cuts With Our Diamond Metal Cut Off Disc. Its Upgraded Blade Features A Diamond High Manganese Steel Substrate And New Brazing Process For Longer Service Life, High Temperature Resistance, And Low Noise..
Brand: WildBossy | Manufacturer: WildBossy
Dimensions: 0.04 x 4.50 x 4.50 inches
See On Amazon #7
PEGATEC Cut Off Wheels 50 Pack, Quality Thin 4 1/2 x0.04x7/8 inch Cutting Disc, Metal & Stainless Steel Aggressive Cutting Wheel for Angle Grinder, General Purpose Metal Cutting (4.5inch)
Asin: B08GC1XZJ8 | Model: S80411151M | PartNumber: S80411151M | Ean: 0779139822899 | UPC: 779139822899
Features
- DESIGNED FOR SHARP & CLEAN CUTTING ON - Exclusive top-grade raw materials and 0.04in ultra-thin thickness, optimized the performance of PEGATEC general purpose metal cutting wheels. The resulting fast cutting times keep at a minimum both burr formation and the thermal load both on the workpiece and on the cutting-off wheel. Which means less rework and higher efficiency.
- SUPER LONG SERVICE LIFE - The cut off wheels 4 1/2 inch are suitable for professional scenes demanding high aggressiveness and long service life. Due to the perfect ratio of BASF resin and high-quality alumina, silicon carbide, they re extremely sturdy with 2.5 times of service life than the conventional brands. For a good craftsman, this means that the time to replace the cutting disks is greatly saved.
- MULTIFUNCTION AND SELF-SHARPENING - The PEGATEC PEGASTAR series angle grinder cut wheel is a special performance grade for performing demanding tasks. It had strong aggressiveness for metallic material such as iron, angle steel, stainless steel and ferrous metals. Its self-sharpening, provides balanced cutting performance throughout the cutting process.
- AUTHENTICATE SECURITY AND STABILITY - The 4.5 cut off wheels is reinforced with double-layer glass fiber mesh. The excellent stability can be ensured by precise measurement, risk of breakage can be avoided even when subjected to lateral forces. Comply with EU EN12413, MPV and TUV standards.
- HIGHLY COMPATIBLE & ATURDY AND STABLE PERFORMANCE - The angle grinder cut wheel is fully compatible with all angle grinders with 7/8-inch shank and speeds up to 13,300 RPM and 80M/S, enabling the cutting disks to achieve optimal performance in many angle grinders. Each cutting piece is supplemented with moisture-proof fiber cloth to ensure that its performance is not affected by moisture and corrosion.
- See more on Amazon...
Multifunction And Self-Sharpening - The Pegatec Pegastar Series Angle Grinder Cut Wheel Is A Special Performance Grade For Performing Demanding Tasks. It Had Strong Aggressiveness For Metallic Material Such As Iron, Angle Steel, Stainless Steel And Ferrous Metals. Its Self-Sharpening, Provides Balanced Cutting Performance Throughout The Cutting Process..
Highly Compatible & Aturdy And Stable Performance - The Angle Grinder Cut Wheel Is Fully Compatible With All Angle Grinders With 7/8-Inch Shank And Speeds Up To 13,300 Rpm And 80M/S, Enabling The Cutting Disks To Achieve Optimal Performance In Many Angle Grinders. Each Cutting Piece Is Supplemented With Moisture-Proof Fiber Cloth To Ensure That Its Performance Is Not Affected By Moisture And Corrosion..
Authenticate Security And Stability - The 4.5" Cut Off Wheels Is Reinforced With Double-Layer Glass Fiber Mesh. The Excellent Stability Can Be Ensured By Precise Measurement, Risk Of Breakage Can Be Avoided Even When Subjected To Lateral Forces. Comply With Eu En12413, Mpv And Tuv Standards..
Super Long Service Life - The Cut Off Wheels 4 1/2 Inch Are Suitable For Professional Scenes Demanding High Aggressiveness And Long Service Life. Due To The Perfect Ratio Of Basf Resin And High-Quality Alumina, Silicon Carbide, They’Re Extremely Sturdy With 2.5 Times Of Service Life Than The Conventional Brands. For A Good Craftsman, This Means That The Time To Replace The Cutting Disks Is Greatly Saved..
Brand: PEGATEC | Manufacturer: PEGATEC
See On Amazon #8
Cut Off Wheels 4-1/2", PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5 Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8" Arbor Hole
Asin: B0BWD1X6GY | Model: Cut Off Wheels 4-1/2 inch | PartNumber: Cut Off Wheels 4-1/2 inch
Features
- Fits All 4-1/2 Inch Angle Grinders PRETEC Cut Off Wheel is compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. The high rotating speed of up to 13,300 RPM, more than common 13,000 RPM, ensure maximum efficiency.
- High-Quality and Durable Made from corundum and white alundum grain, PRETEC 4 1/2 Cutting Wheels are designed to provide high hardness, durability, and abrasion resistance. These features not only extend the wheel's service life but also ensure your safety during use.
- Sharp and Clean Cut PRETEC's 0.04 inch ultra-thin 4.5 Cut Off Wheel for Metal offer fast burr-free and stable cutting, allowing you to make precise and efficient cuts in steel, stainless steel, and other ferrous metals. The discs' unique design promotes heat dissipation, avoiding metal thermal burns, and reducing material loss during cutting.
- Professional Certification Our Cut Off Wheels 4 1/2 inch hold CE and ISO certifications, ensuring the highest safety and quality standards. With these credentials, you can be confident in using PRETEC cutoff wheels 4 1/2 inch for cutting stainless steel, aluminum alloy, cast iron, carbon steel, and general-purpose metal.
- Multiple Uses These 4 1/2 cut off wheels are perfect for various cutting projects, such as cutting steel, iron, fiberglass, plastic, stainless steel including rebar, steel pipe, sheet metal, and structural tubing. With our 4.5 inch cut off wheels, you can achieve exceptional results in all your cutting needs.
- See more on Amazon...
【Sharp And Clean Cut】 Pretec's 0.04 Inch Ultra-Thin 4.5 Cut Off Wheel For Metal Offer Fast Burr-Free And Stable Cutting, Allowing You To Make Precise And Efficient Cuts In Steel, Stainless Steel, And Other Ferrous Metals. The Discs' Unique Design Promotes Heat Dissipation, Avoiding Metal Thermal Burns, And Reducing Material Loss During Cutting..
【Multiple Uses】 These 4 1/2 Cut Off Wheels Are Perfect For Various Cutting Projects, Such As Cutting Steel, Iron, Fiberglass, Plastic, Stainless Steel Including Rebar, Steel Pipe, Sheet Metal, And Structural Tubing. With Our 4.5 Inch Cut Off Wheels, You Can Achieve Exceptional Results In All Your Cutting Needs..
【Professional Certification】 Our Cut Off Wheels 4 1/2 Inch Hold Ce And Iso Certifications, Ensuring The Highest Safety And Quality Standards. With These Credentials, You Can Be Confident In Using Pretec Cutoff Wheels 4 1/2 Inch For Cutting Stainless Steel, Aluminum Alloy, Cast Iron, Carbon Steel, And General-Purpose Metal..
【High-Quality And Durable】 Made From Corundum And White Alundum Grain, Pretec 4 1/2 Cutting Wheels Are Designed To Provide High Hardness, Durability, And Abrasion Resistance. These Features Not Only Extend The Wheel's Service Life But Also Ensure Your Safety During Use..
Brand: PRETEC | Manufacturer: PRETEC
See On Amazon #9
DeWalt DW8062 4-1/2"x.045"x7/8" Metal Angle Grinder Thin Cutoff Wheel, 10 Pack
Asin: B006ERQD2M | Model: DW8062 - 10,PK | PartNumber: DW8062 - 10,PK | Ean: 4883183158821
Features
- Thin . 045-Inch wheel design for fast burr free cutting this are easy to use
- This are highly durable this is manufactured in China
- Proprietary aluminum oxide grain combination for aggressive cutting action
- Proprietary material mix ensures durable long life wheels 2 full sheets of fiberglass for durability and safety
- Fast burr free cutting set of 10
- See more on Amazon...
Proprietary Aluminum Oxide Grain Combination For Aggressive Cutting Action.
Fast Burr Free Cutting Set Of 10.
Proprietary Material Mix Ensures Durable Long Life Wheels 2 Full Sheets Of Fiberglass For Durability And Safety.
This Are Highly Durable This Is Manufactured In China.
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 0.04 x 4.50 x 4.50 inches
See On Amazon #10
55 Pack Cut Off Wheels Industrial Grade 4 1/2 Cut Off Wheel, Ultra Thin 4-1/2" x 3/64" x 7/8" Cutting Wheel, Metal & Stainless Steel Cutting Discs for Angle Grinder, 30% Performance Up
Asin: B0CWL7T6H8
Features
- PREMIUM ALUMINUM OXIDE MATERIAL: Our 4 1/2 cut off wheel are made of a industrial grade combination of premium aluminum oxide particles for extreme cutting action and unmatched excellent performance in cutting life, speed, and accuracy.
- EFFICIENT CUTTING & 30% PERFORMANCE IMPROVEMENT: Maximum speeds up to 13,300 RPM and 80M/S for efficient and precise cutting; 0.046-inch thin cutting wheels design for fast, burr-free cuts; proprietary aluminum oxide particles for long life and fast cutting speeds; Double-layer fiberglass mesh reinforcement for greater safety and durability.
- SAFETY & RELIABILITY: oUR 4.5 cut off wheel for metal is reinforced by a double-layer fiberglass mesh, which ensures excellent safety and stability and prevents the risk of breakage, even when subjected to lateral forces, in accordance with international standards and safety requirements.
- EXTRA LONG LIFE & DURABILITY: Last up to twice time than traditional brands due to the use of perfectly proportioned BASF resins and quality aluminum oxide and silicon carbide. Greatly save time in replacing grinder blades. Each cutting disc is supplemented with a moisture-resistant fiber cloth to invoid not affected by moisture and corrosion.
- VERSATILE APPLICATIONS: Designed to cut all metal, including rebar, stainless steel, steel pipe, structural and galvanized steel, sheet metal, structural tubing, black steel, and more, the cutting discs 4 1/2 for angle grinder make strong, fast, clean cuts. Perfectly compatible with all 4-1/2 inch (115 mm) angle grinders with 7/8 inch (22.2 mm) mandrels.
- SAFETY TIPS: When using the angle grinder cutting disc, refer to the safety precautions on the front of the grinder cutting wheel and always take care to wear the correct PPE. If there are any problems with the product, please contact us and we will help you with after-sales issues.
- See more on Amazon...
Safety & Reliability: Our 4.5 Cut Off Wheel For Metal Is Reinforced By A Double-Layer Fiberglass Mesh, Which Ensures Excellent Safety And Stability And Prevents The Risk Of Breakage, Even When Subjected To Lateral Forces, In Accordance With International Standards And Safety Requirements..
Versatile Applications: Designed To Cut All Metal, Including Rebar, Stainless Steel, Steel Pipe, Structural And Galvanized Steel, Sheet Metal, Structural Tubing, Black Steel, And More, The Cutting Discs 4 1/2 For Angle Grinder Make Strong, Fast, Clean Cuts. Perfectly Compatible With All 4-1/2 Inch (115 Mm) Angle Grinders With 7/8 Inch (22.2 Mm) Mandrels..
Safety Tips: When Using The Angle Grinder Cutting Disc, Refer To The Safety Precautions On The Front Of The Grinder Cutting Wheel And Always Take Care To Wear The Correct Ppe. If There Are Any Problems With The Product, Please Contact Us And We Will Help You With After-Sales Issues..
Extra Long Life & Durability: Last Up To Twice Time Than Traditional Brands Due To The Use Of Perfectly Proportioned Basf Resins And Quality Aluminum Oxide And Silicon Carbide. Greatly Save Time In Replacing Grinder Blades. Each Cutting Disc Is Supplemented With A Moisture-Resistant Fiber Cloth To Invoid Not Affected By Moisture And Corrosion..
Efficient Cutting & 30% Performance Improvement: Maximum Speeds Up To 13,300 Rpm And 80M/S For Efficient And Precise Cutting; 0.046-Inch Thin Cutting Wheels Design For Fast, Burr-Free Cuts; Proprietary Aluminum Oxide Particles For Long Life And Fast Cutting Speeds; Double-Layer Fiberglass Mesh Reinforcement For Greater Safety And Durability..
Brand: Revvstark | Manufacturer: Revvstark
Dimensions: 0.10 x 4.53 x 0.87 inches
See On Amazon
Looking For Something Else?
Search