Best Combined Drill Countersinks - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Combined Drill Countersinks on Amazon
- Shars #1-5 82 Degree HSS Center Drill Combined Drill & Countersink 5pcs Set 404-1374 !(
- KEO 10000 High-Speed Steel Plain Combined Drill and Countersink Set, Uncoated (Bright) Finish, 60 De...
- Drill America - DEWCCD4 #4 Regular High Speed Steel Combined Drill Bit and Countersink, Dew Series
- Saipe 8Pcs HSS Center Drill Bits Set 60-Degree Angle Combined Countersink Drill Bit Tool High Speed ...
- HHIP 5000-2047 60 Degree High Speed Steel Combined Drill and Countersink, 3/64" Drill Diameter, 1/8"...
- Drill America-DMOCCD2-60 2 Solid Carbide Combined Drill Bit and Countersink, DMO Series
- HHIP 5000-2125 60 Degree High Speed Steel Combined Drill and Countersink, 1/8" Drill Diameter, 5/16"...
- Utoolmart 10 Pcs Center Drill Countersink Lathe Bit Mill Tool, Combined Drills Plain Type Imperial, ...
- HHIP 5000-3109 60 Degree M42 8% Cobalt Combined Drill and Countersink, 7/64" Drill Diameter, 1/4" Bo...
- KEWAYO 7Pieces Center Drill Bits Set, M2 High Speed Steel 60 Degree Angle Center Drill Bits Kit Coun...
#1
Shars #1-5 82 Degree HSS Center Drill Combined Drill & Countersink 5pcs Set 404-1374 !(
Asin: B083TNF8QV
Features
- Part# 404-1374
- FINISH COATING: Uncoated
- TYPE COUNTERSINK: Plain
- ROTATION: Right Hand
- PACKAGE QUANTITY:5
- See more on Amazon...
Type Countersink: Plain.
Package Quantity:5.
Rotation: Right Hand.
Finish Coating: Uncoated.
Brand: Shars | Manufacturer: Shars
See On Amazon #2
KEO 10000 High-Speed Steel Plain Combined Drill and Countersink Set, Uncoated (Bright) Finish, 60 Degree Point Angle, 1 - #5 Wire Sizes
Asin: B00946TNTU | Model: 10000 | PartNumber: 10000
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- 60 degree angle
- Set includes #1, #2, #3, #4, #5 C'drills
- This 5-piece set includes one piece each of the following plain type combined drill
- See more on Amazon...
60 Degree Angle.
This 5-Piece Set Includes One Piece Each Of The Following Plain Type Combined Drill.
Set Includes #1, #2, #3, #4, #5 C'drills.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 pounds
See On Amazon #3
Drill America - DEWCCD4 #4 Regular High Speed Steel Combined Drill Bit and Countersink, Dew Series
Asin: B00FXBP9D4 | Model: DEWCCD4 | PartNumber: DEWCCD4 | Ean: 0887861060134 | UPC: 887861060134
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Used for producing center holes in work pieces which require machining between centers
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For Producing Center Holes In Work Pieces Which Require Machining Between Centers.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
Saipe 8Pcs HSS Center Drill Bits Set 60-Degree Angle Combined Countersink Drill Bit Tool High Speed Steel Countersink Tools for Lathe Mill Metalworking (1/1.5/2/2.5/3/4/5/6mm)
Asin: B0C9TVZ8MG
Features
- Center Drill Bits Set Comes with 8pcs Center Drill Bits Set, they are in size 1/1.5/2/2.5/3/4/5/6mm, which can meet your different needs. Each drill has a double end and is ground with a standard 60 degree angle.
- HSS Material Made of high quality High Speed Steel for high hardness, wear resistance, not easy to break. Straight shank design is more suitable for many electric drills and drilling machines.
- 60 Degree Tip Angle Center drill bits accurate to 60 degree for producing center holds in components or work pieces with require machining between centers.
- Accurate Positioning This countersink bit drills an exact center hole in the material prior to turning and can also be used as a starter bit to obtain an accurate hole. Suitable for all standard centers!
- Lathe Metalworking The center drill bit set can work with lathe machines and most electronic drills to drill holes in Mold Steel, Cast Iron, Alum, Carbon Steel, Wood, Thread Mold and other tough material, it will improve the the efficiency of drilling.
- See more on Amazon...
【60 Degree Tip Angle】Center Drill Bits Accurate To 60 Degree For Producing Center Holds In Components Or Work Pieces With Require Machining Between Centers..
【Lathe Metalworking】The Center Drill Bit Set Can Work With Lathe Machines And Most Electronic Drills To Drill Holes In Mold Steel, Cast Iron, Alum, Carbon Steel, Wood, Thread Mold And Other Tough Material, It Will Improve The The Efficiency Of Drilling..
【Accurate Positioning】This Countersink Bit Drills An Exact Center Hole In The Material Prior To Turning And Can Also Be Used As A Starter Bit To Obtain An Accurate Hole. Suitable For All Standard Centers!.
【Hss Material】Made Of High Quality High Speed Steel For High Hardness, Wear Resistance, Not Easy To Break. Straight Shank Design Is More Suitable For Many Electric Drills And Drilling Machines..
Brand: Saipe | Manufacturer: Saipe
See On Amazon #5
HHIP 5000-2047 60 Degree High Speed Steel Combined Drill and Countersink, 3/64" Drill Diameter, 1/8" Body Diameter, 1-1/4" OAL, 1
Asin: B00DVTKXE0 | Model: 5000-2047 | PartNumber: 5000-2047 | Ean: 0769053052281 | UPC: 769053052281
Features
- Made of high speed steel and ground from solid
- Plain style
- Used for centering work ends, where the work piece is to be revolved on machine centers
- 60 degree countersink angle fits all standard centers
- Ground from solid
- See more on Amazon...
Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers.
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Plain Style.
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches | Weight: 0.00 pounds
See On Amazon #6
Drill America-DMOCCD2-60 2 Solid Carbide Combined Drill Bit and Countersink, DMO Series
Asin: B00BC3WXYU | Model: DMOCCD2-60 | PartNumber: DMOCCD2-60 | Ean: 0887861055178 | UPC: 887861055178
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Used for producing center holes in work pieces which require machining between centers
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For Producing Center Holes In Work Pieces Which Require Machining Between Centers.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.02 Pounds
See On Amazon #7
HHIP 5000-2125 60 Degree High Speed Steel Combined Drill and Countersink, 1/8" Drill Diameter, 5/16" Body Diameter, 2-1/8" OAL, 4
Asin: B00DVTKYVM | Model: 5000-2125 | PartNumber: 5000-2125 | Ean: 0769053052311 | UPC: 769053052311
Features
- Made of high speed steel and ground from solid
- Plain style
- Used for centering work ends, where the work piece is to be revolved on machine centers
- 60 degree countersink angle fits all standard centers
- Ground from solid
- See more on Amazon...
Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers.
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Plain Style.
First Available: 03/12/2017
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #8
Utoolmart 10 Pcs Center Drill Countersink Lathe Bit Mill Tool, Combined Drills Plain Type Imperial, 3/16-inch Combined Countersinks Drills Set Tool, HSS-6542 Countersinks
Asin: B07YZLZGDF | Model: UT190926Z-0035 | PartNumber: UT190926Z-0035
Features
- Dimension - The shank diameter of this center drill is 3/16-inch, the working edge length is 4mm / 0.16-inch, and the total length is 44mm / 1.73-inch.
- Material and Features - High Speed Steel, high hardness, rustproof, solid, durable and excellent for use.
- Durable and Resistance - Countersink drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance.
- Convenience - Easy to use and install, change bits fast which one-handed load and release. Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum and so on.
- Precisely Processing - Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking.
- See more on Amazon...
【Durable And Resistance】- Countersink Drill Bit Is Made Of Hss High Speed Steel, With Extremely Sharp Blade, Low Consumption And Durable With Impact Resistance, Wear Resistance..
【Precisely Processing】- Center And Spotting Drills Are Used To Make A Conical Hole For A Lathe Center In Order To Make A Starting Point For A Standard Twist Drill, Designed To Prevent The Twist Drill From Walking..
【Convenience】- Easy To Use And Install, Change Bits Fast Which One-Handed Load And Release. Available For All Kinds Of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum And So On..
【Material And Features】- High Speed Steel, High Hardness, Rustproof, Solid, Durable And Excellent For Use..
Brand: Utoolmart | Manufacturer: Utoolmart
See On Amazon #9
HHIP 5000-3109 60 Degree M42 8% Cobalt Combined Drill and Countersink, 7/64" Drill Diameter, 1/4" Body Diameter, 2" OAL, 3
Asin: B00DVTL7S6 | Model: 5000-3109 | PartNumber: 5000-3109 | Ean: 0769053052397 | UPC: 769053052397
Features
- Made of M42 steel for longer tool life
- Plain style
- Ground from solid
- Used for centering work ends where the work piece is to be revolved on machine centers
- 60 Degree countersink angle fits all standard centers
- See more on Amazon...
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Used For Centering Work Ends Where The Work Piece Is To Be Revolved On Machine Centers.
Plain Style.
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 Inches
See On Amazon #10
KEWAYO 7Pieces Center Drill Bits Set, M2 High Speed Steel 60 Degree Angle Center Drill Bits Kit Countersink Tools for Lathe Metalworking Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0
Asin: B096HRJPTR | Model: K-HSS-7-1A | PartNumber: K-HSS-7-1A | Ean: 9007468642187
Features
- Accurate: A 60 Degree Angle center drill is very useful in drilling accurate center holes, 60 degree countersink holes or starter holes for bigger drill bits in metal working
- Widely Applicable: work with lathe machines and most electronic drills to drill holes in Steel, Iron, Alum, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB
- Multiple Sizes: 7Pieces of Plain Center Drill Bits Set Including 1.0 1.5 2.0 2.5 3.0 4.0 5.0 to meet different needs.
- Spiral flute: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process, the precision ground surface is corrosion resistance to achieve better using effects and prolong the working life
- High Quality: Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance
- See more on Amazon...
Multiple Sizes: 7Pieces Of Plain Center Drill Bits Set Including 1.0 1.5 2.0 2.5 3.0 4.0 5.0 To Meet Different Needs..
High Quality: Center Drill Bit Is Made Of Hss High Speed Steel, With Extremely Sharp Blade, Low Consumption And Durable With Impact Resistance, Wear Resistance.
Spiral Flute: Spiral Groove Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, The Precision Ground Surface Is Corrosion Resistance To Achieve Better Using Effects And Prolong The Working Life.
Widely Applicable: Work With Lathe Machines And Most Electronic Drills To Drill Holes In Steel, Iron, Alum, Carbon Steel, Brass And Other Tough Material Ranging From 170Hb Up To 200Hb.
Brand: KEWAYO | Manufacturer: KEWAYO
Weight: 2.20 Pounds
See On Amazon #11
HHIP 5000-2031 60 Degree High Speed Steel Combined Drill and Countersink, 1/32" Drill Diameter, 1/8" Body Diameter, 1-1/4" OAL, 0
Asin: B00DVTKWL4 | Model: 5000-2031 | PartNumber: 5000-2031 | Ean: 0769053052274 | UPC: 769053052274
Features
- Made of high speed steel and ground from solid
- Plain style
- Used for centering work ends, where the work piece is to be revolved on machine centers
- 60 degree countersink angle fits all standard centers
- Ground from solid
- See more on Amazon...
Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers.
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Plain Style.
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #12
HHIP 5000-3125 60 Degree M42 8% Cobalt Combined Drill and Countersink, 1/8" Drill Diameter, 5/16" Body Diameter, 2-1/8" OAL, 4
Asin: B00DVTL8SA | Model: 5000-3125 | PartNumber: 5000-3125 | Ean: 0769053052403 | UPC: 769053052403
Features
- Made of M42 steel for longer tool life
- Plain style
- Ground from solid
- Used for centering work ends where the work piece is to be revolved on machine centers
- 60 Degree countersink angle fits all standard centers
- See more on Amazon...
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Used For Centering Work Ends Where The Work Piece Is To Be Revolved On Machine Centers.
Plain Style.
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 0.50 x 0.50 x 4.00 inches
See On Amazon #13
FTG USA Adjustable Wood Countersink Drill Bit Set 6 Sizes Set with Tapered Drill Bit for Woodworking
Asin: B07T4ZV4V2 | Model: 2341P | PartNumber: 2341P | Ean: 0850003437163 | UPC: 850003437163
Features
- Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills
- Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits
- Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits
- THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4 hex shank. Tapered drill bit with countersink set, drill bits secured with pin, FTG 2341P Maximum Torque countersink drill bits with countersinks for wood
- STORAGE CONTAINERS for this set available below on this page at section Make it a bundle. Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits
- See more on Amazon...
Tapered Drill Bits Pointed Tip And Wide Flute For Drilling Fast, Clean Pilot Hole, Ensures Tight Fit For Screws. Countersink Hex Drill Bit Set With Tapered Drill Bit Can Be Replaced With Ftg Replacement Taper Drill Bits Countersink For Extended Wood Bit. Countersink Drill Bits For Wood Made To Drill, Countersink, And Counter-Bore In 1 Step Sink Counter Set. Counter Sink Bits Designed As To Work As Wood Drill Bits.
Storage Containers For This Set Available Below On This Page At Section " Make It A Bundle". Counter Sinker Drill Bit Set Designed In New Jersey By Fair Trade Group Usa And Professionally Manufactured In China At Ftg Usa Specs. Analysis Report Issued By Anab Us Accredited Lab, Confirms That Drill Bits Set High Speed Steel Quality Countersink Bits Meet Desired Specs Of Hss M2 Grade 6542, Drill Bit Set Harder Than Hss 4241 And Hss 4341 Used In Other Similar Tapered Countersink Drill Bits.
Third-Party Tested By Us Accredited Lab - Hss M2 Grade 6542 Countersink Drill Bit For Wood With Tapered Drill Bits. Wood Countersink Bit With Wider Flute Shape For Increased Chip Flow. Bits Secured With Pin Never Come Loose From Shank. Drill Countersink Set With Logo Brand Name Laser Printed On Each Countersink Bit Quick Change 1/4" Hex Shank. Tapered Drill Bit With Countersink Set, Drill Bits Secured With Pin, Ftg 2341P Maximum Torque Countersink Drill Bits With Countersinks For Wood.
Wood Drill Bit Set With Adjustable 4 Flute Cutter Counter Bore Chamfer Angle 82 Degree, Smooth Countersinking In Hard And Soft Wood, Tapered Holes For Screws. Adjustable Countersink Drill Bit With Quality Built Depth Adjustable Counter Bore Attaches To Flat On Shank With 2 Hex Screws For Controlled Pilot Hole Depth. Best Adjustable Wood Countersink Drill Bits Set Ideal For Woodworking. Countersink Tool Set Made With Countersink Bits For Wood, Ftg 2341P Tapered Countersink Drill Bits.
Brand: FTG USA | Manufacturer: Fair Trade Group USA LLC
Dimensions: 0.24 x 4.72 x 0.24 inches | Weight: 1.00 pounds
See On Amazon #14
HHIP 5000-2109 60 Degree High Speed Steel Combined Drill and Countersink, 7/64" Drill Diameter, 1/4" Body Diameter, 2" OAL, 3
Asin: B00DVTKY7Q | Model: 5000-2109 | PartNumber: 5000-2109 | Ean: 0769053052304 | UPC: 769053052304
Features
- Made of high speed steel and ground from solid
- Plain style
- Used for centering work ends, where the work piece is to be revolved on machine centers
- 60 degree countersink angle fits all standard centers
- Ground from solid
- See more on Amazon...
Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers.
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Plain Style.
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #15
amoolo Countersink Drill Bits Set 7Pcs, Counter Sink Drill Bit for Wood, Woodworking High Carbon Steel Carpentry Bit with Chamfering Combination Pedestal, 1 Free Hex Key Wrench Attached
Asin: B08HS5L64X | Model: ACSD190607PCS | PartNumber: ACSD190607PCS | Ean: 0778836622238 | UPC: 778836622238
Features
- IDEAL COMBO SET A set of countersink drill bits with 7 drill size, 7/64 (3mm), 5/32 (4mm), 13/64 (5mm), 1/4 (6mm), 9/32 (7mm), 5/16 (8mm) combine with 19/32 (15mm) countersink pedestal, 13/32 (10mm) combine with 45/64"(18mm) countersink pedestal. A 1/10 (2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization.
- PREMIUM QUALITY Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects
- EFFICIENT DESIGN 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling; 2-spiral flute makes chip removing easy and efficient; 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness.
- MULTIPLE APPLICATION Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill. The drilling depth of countersink drill bits are adjustable by screws with various lengths; Meanwhile, their bits are removable for easy cleaning, sharpening,and replacement. NOT for hard metals or steel board
- SOPHISTICATED DESIGN Extra straightening drill bit with exquisite countersink pedestal provide user a method of drilling a countersink hole with 1 time drill process.Extra straightening drill bit makes the drill hole accurate and smooth, exquisite countersink pedestal creates proper countersink structure with efficient experience.
- See more on Amazon...
【Efficient Design】3-Point Tricuspid Ensures Drill Process Accurate And Fast, No Offset, Slip And Bias During Drilling; 2-Spiral Flute Makes Chip Removing Easy And Efficient; 5-Edged Chatter-Free Chamfer Cutter Pedestal Design Makes Countersink Precise And Smooth. All Cutting Edge Are Well Hardened And Honed For Sharpness..
【Sophisticated Design】Extra Straightening Drill Bit With Exquisite Countersink Pedestal Provide User A Method Of Drilling A Countersink Hole With 1 Time Drill Process.Extra Straightening Drill Bit Makes The Drill Hole Accurate And Smooth, Exquisite Countersink Pedestal Creates Proper Countersink Structure With Efficient Experience..
【Multiple Application】 Perfect For Wooden Planks, Fiberboard, Particle Board, Plywood, Plastic, Pvc And Soft Metals. Suitable For Hand Drill, Bench Drill And Electric Drill. The Drilling Depth Of Countersink Drill Bits Are Adjustable By Screws With Various Lengths; Meanwhile, Their Bits Are Removable For Easy Cleaning, Sharpening,And Replacement. × Not For Hard Metals Or Steel Board.
【Premium Quality】Made With Industrial Grade High-Carbon Steel, Great Hardness Provides Sharp Edges, High Strength Takes Bits With Superior Cutting Capactiy And Durability. Ideal For Household Woodworking And Diy Projects.
Brand: amoolo | Manufacturer: amoolo
See On Amazon #16
HHIP 2001-0375 3/8 Inch Single Flute 82 Degree HSS Countersink
Asin: B00N4087V2 | Model: 2001-0375 | PartNumber: 2001-0375 | Ean: 0769053005034 | UPC: 769053005034
Features
- Tip size is 1/32". Diameter of shank is 1/4". Overall length is 2"
- These HHIP HSS single flute countersinks and sets offer versatility, efficiency, and durability, making them especially suitable for portable machine work and applications involving smaller holes.
- Single flute for clean and precise cutting, suitable for deburring and chamfering. The design allows for countersinking smaller holes compared to multi-flute tools & aids in efficient chip evacuation during cutting.
- Available in 60 82 & 90 - 60 enables quick chamfering, ideal for softer materials. 82 offers balanced performance across a wide range of materials. 90 provides a stronger chamfer, suitable for harder materials.
- Ideal for various materials, including metals, wood, and plastics. Suitable for professional machining applications and DIY projects. Available in a variety of sizes to accommodate different hole dimensions.
- See more on Amazon...
Single Flute For Clean And Precise Cutting, Suitable For Deburring And Chamfering. The Design Allows For Countersinking Smaller Holes Compared To Multi-Flute Tools & Aids In Efficient Chip Evacuation During Cutting..
Ideal For Various Materials, Including Metals, Wood, And Plastics. Suitable For Professional Machining Applications And Diy Projects. Available In A Variety Of Sizes To Accommodate Different Hole Dimensions..
Available In 60° 82° & 90° - 60° Enables Quick Chamfering, Ideal For Softer Materials. 82° Offers Balanced Performance Across A Wide Range Of Materials. 90° Provides A Stronger Chamfer, Suitable For Harder Materials..
These Hhip Hss Single Flute Countersinks And Sets Offer Versatility, Efficiency, And Durability, Making Them Especially Suitable For Portable Machine Work And Applications Involving Smaller Holes..
Brand: HHIP | Manufacturer: HHIP
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #17
Combined Countersinks Drills Set Tool 5 Pack Center Drill Countersink Lathe Bit Mill Tooling Set Tip Angle 60 Degree Bits for Metal, Alloy, Copper, Iron, Aluminum, Titanium and Wood Working
Asin: B07WDWQWJC | Ean: 0824917782008 | UPC: 824917782008
Features
- Material and Features: High Speed Steel, high hardness, rustproof, solid, durable and excellent for use.
- Application: 60 countersink angle fits all standard centers, Used for centering work ends, where the work piece is to be revolved on machine centers.
- Durable and Resistance: Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance.
- Convenience: Easy to use and install, change bits fast which one-handed load and release. Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum and so on.
- Precisely Processing: Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking.
- See more on Amazon...
✔ Durable And Resistance: Center Drill Bit Is Made Of Hss High Speed Steel, With Extremely Sharp Blade, Low Consumption And Durable With Impact Resistance, Wear Resistance..
✔ Precisely Processing: Center And Spotting Drills Are Used To Make A Conical Hole For A Lathe Center In Order To Make A Starting Point For A Standard Twist Drill, Designed To Prevent The Twist Drill From Walking..
✔ Convenience: Easy To Use And Install, Change Bits Fast Which One-Handed Load And Release. Available For All Kinds Of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum And So On..
✔ Application: 60° Countersink Angle Fits All Standard Centers, Used For Centering Work Ends, Where The Work Piece Is To Be Revolved On Machine Centers..
Brand: Rongon | Manufacturer: Rongon
Weight: 0.10 Pounds
See On Amazon #18
6 Pieces Center Drill Bits Set M2 High Speed Steel 60-Degree Angle Center Drill Bits Lathe Mill Combined Centering Drills Bit Countersink Tool for Metalworking Size 1.0 1.5 2.0 2.5 3.0 5.0
Asin: B0BZHSKPLS | Ean: 0751501832330 | UPC: 751501832330
Features
- High Quality: Our center drill bits are made of high-quality M2 High-speed steel, solid and high-temperature wear-resistant.
- High Performance: Entire center drill bit set contains 7 drill bits of different sizes from 1/1.5/2/2.5/3/5 to meet different needs. Drills can be used to process centering holes and countersinks of general materials, and can also be used to process center holes on the end faces of shafts and other parts. Reasonable 60-degree angle drills precise tapered holes in metal processing, which makes the positioning more accurate, reduces errors and makes drilling more efficient.
- M2 HSS High-Speed Steel: Our center drill bits set is made of high-quality M2 high-speed steel, high-temperature quenching, overall heat treatment, good wear resistance, corrosion resistance, low consumption, and durability.
- Fast Cutting: Triangular shank design is anti-slip, full grinding process, straight groove design, sharp edge, fast cutting, and high work efficiency. Double-head design, both ends can be used for cutting, cost-saving, convenient and fast, universal straight shank, convenient disassembly, and assembly.
- Wide Range of Uses: These center drills are used to maintain the production work pieces with require machining between centers or producing center in components. It is suitable for oriented twist drills to process holes to reduce errors. It can be used with lathes and most electronic drills and screwdrivers for cutting works for wood, steel, cast iron, stainless steel, aluminum alloy, and other metal materials with a hardness of 35-40.
- See more on Amazon...
M2 Hss High-Speed Steel: Our Center Drill Bits Set Is Made Of High-Quality M2 High-Speed Steel, High-Temperature Quenching, Overall Heat Treatment, Good Wear Resistance, Corrosion Resistance, Low Consumption, And Durability..
Wide Range Of Uses: These Center Drills Are Used To Maintain The Production Work Pieces With Require Machining Between Centers Or Producing Center In Components. It Is Suitable For Oriented Twist Drills To Process Holes To Reduce Errors. It Can Be Used With Lathes And Most Electronic Drills And Screwdrivers For Cutting Works For Wood, Steel, Cast Iron, Stainless Steel, Aluminum Alloy, And Other Metal Materials With A Hardness Of 35-40..
Fast Cutting: Triangular Shank Design Is Anti-Slip, Full Grinding Process, Straight Groove Design, Sharp Edge, Fast Cutting, And High Work Efficiency. Double-Head Design, Both Ends Can Be Used For Cutting, Cost-Saving, Convenient And Fast, Universal Straight Shank, Convenient Disassembly, And Assembly..
High Performance: Entire Center Drill Bit Set Contains 7 Drill Bits Of Different Sizes From 1/1.5/2/2.5/3/5 To Meet Different Needs. Drills Can Be Used To Process Centering Holes And Countersinks Of General Materials, And Can Also Be Used To Process Center Holes On The End Faces Of Shafts And Other Parts. Reasonable 60-Degree Angle Drills Precise Tapered Holes In Metal Processing, Which Makes The Positioning More Accurate, Reduces Errors And Makes Drilling More Efficient..
Brand: TOPDANCHUANG | Manufacturer: TOPDANCHUANG
See On Amazon #19
Chicago Latrobe - 56710 217 Series High Speed Steel Combined Drill and Countersink Set, Bright Finish, Plain Style, 60 Degrees, #1 - #5 Size (5 Piece Set)
Asin: B000LEP69A | Model: 56710 | PartNumber: 56710 | Ean: 0662355567104 | UPC: 662355567104
Features
- Number of tools: 5
- Sizes in Set: Numbers 1, 2, 3, 4, 5
- Made in the USA
- Made in the USA
- Made in the USA
- See more on Amazon...
Made In The Usa.
Made In The Usa.
Made In The Usa.
Sizes In Set: Numbers 1, 2, 3, 4, 5.
Brand: Chicago-Latrobe | Manufacturer: Greenfield Industries
See On Amazon #20
Drill America #4x6" Extra Long Combined Drill Bit and Countersink, Dew Series
Asin: B00FXACLTK | Model: DEW4X6 | PartNumber: DEW4X6 | Ean: 0887861060325 | UPC: 887861060325
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Used for producing center holes in work pieces which require machining between centers
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For Producing Center Holes In Work Pieces Which Require Machining Between Centers.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search