Best Brass Sheets - Buying Guide
Last Updated: 05/26/2024
Share on
Bestselling Brass Sheets on Amazon
- 2 Pcs Brass Sheet, 6" x 6", 24 Gauge(0.5mm) Thickness, No Scratches, Film Attached Brass Plates
- Yaocom 4 Pieces Brass Sheet 0.025" Thickness x 6" Width x 12" Length 22 Gauge Thin Brass Plates Meta...
- 6 Pieces Brass Sheet 6 x 6 Inches 20 Gauge 0.8mm Thickness Brass Plates Double Sided Film Attached M...
- 2 Pcs Brass Sheet, 6" x 6" x 0.04'', 18 Gauge(1.02mm) Thickness, No Scratches, Double-Side Film Atta...
- Zonon 4 Pcs Brass Sheet 12 x 6 Inch, 26 Gauge (0.4mm) Thickness Metal Sheets No Scratches Metal Plat...
- Tandefio 2 Pcs Brass Sheet 12" x 6", 14 Gauge(0.06") Thickness Brass Plates Metal Film Attached Bras...
- Feelers Copper Metal Brass Sheet Roll 38 Gauge x 8 inch x 40 inch, Brass Plate High Hardness Free-Cu...
- K&S Percision Metals 16404 Brass Sheet Metal Rack, 0.016" Thickness x 6" Width x 12" Length, 26 gaug...
- HYGMPDAS 2 Pcs Brass Sheet - 6'' x 6'' x 0.04"(18 Gauge), Brass Sheet Metal
- Yaocom 6 Pieces Brass Plate 6 x 6, 18 Gauge(1mm) Thickness Brass Sheet Film Attached Metal Plates fo...
#1
2 Pcs Brass Sheet, 6" x 6", 24 Gauge(0.5mm) Thickness, No Scratches, Film Attached Brass Plates
Asin: B0BPBTHJP1 | Ean: 0791642101070 | UPC: 791642101070
Features
- Quantity: 2 Pcs brass sheets
- Size: 6 x 6, 24 Gauge(153*153*0.5mm) Thickness
- H62 brass with an average copper content of 62%. Easy to be cut.
- Packing:Each copper has protective sheet(blue) on both sides, which protects the surface of the copper from scratches or damaging.
- Be careful:Since the copper sheet has been cutted, the edge may be a little sharp, please take care of yourself when holding it.
- See more on Amazon...
H62 Brass With An Average Copper Content Of 62%. Easy To Be Cut..
Be Careful:Since The Copper Sheet Has Been Cutted, The Edge May Be A Little Sharp, Please Take Care Of Yourself When Holding It..
Packing:Each Copper Has Protective Sheet(Blue) On Both Sides, Which Protects The Surface Of The Copper From Scratches Or Damaging..
Size: 6" X 6", 24 Gauge(153*153*0.5Mm) Thickness.
Brand: iteshuai | Manufacturer: iteshuai
Dimensions: 0.12 x 6.00 x 6.00 inches
See On Amazon #2
Yaocom 4 Pieces Brass Sheet 0.025" Thickness x 6" Width x 12" Length 22 Gauge Thin Brass Plates Metal Sheet Metal Shims for Crafts DIY Decoration Hobbies
Asin: B0CH33HHBK
Features
- Comprehensive Package for Varied Usage: with each purchase, you will receive 4 decorative brass sheets; This not only offers you a sufficient quantity to cater to your daily needs but also allows you flexibility for replacements and even sharing with others who require them
- Quality and Durability: crafted from brass, these decorative metal sheets assure users of good mechanical properties, thermoplasticity, cold plasticity, and machinability; While brass is inherently corrosion resistant, please note that it can be prone to corrosion cracks if not properly maintained; Nevertheless, the material's quality ensures stable, long lasting usage
- Precise Sizing for Convenient Working: each brass sheet measures approximately 12 x 6 inches/ 30 x 15 cm with a thickness of about 0.03 inches/ 0.64 mm; This size specification facilitates easier processing into various parts, saving you time and improving efficiency
- Ideal for DIY Enthusiasts: if you're a DIY buff, these metal sheets for crafting are just what you need; They are easy to cut, drill, and modify to your desired length, making them ideally adaptable for your projects; Their weldability and brazing capacity add to their DIY friendliness
- Multipurpose Uses: the versatility of the brass plates for engraving is certainly a standout feature; From art and hobby workshops to industrial and scientific projects, these sheets can be processed into varied parts such as spacers, washers, and more; Moreover, they are equally apt for architectural decoration, heat transfer, and other diverse applications
- See more on Amazon...
Precise Sizing For Convenient Working: Each Brass Sheet Measures Approximately 12 X 6 Inches/ 30 X 15 Cm With A Thickness Of About 0.03 Inches/ 0.64 Mm; This Size Specification Facilitates Easier Processing Into Various Parts, Saving You Time And Improving Efficiency.
Multipurpose Uses: The Versatility Of The Brass Plates For Engraving Is Certainly A Standout Feature; From Art And Hobby Workshops To Industrial And Scientific Projects, These Sheets Can Be Processed Into Varied Parts Such As Spacers, Washers, And More; Moreover, They Are Equally Apt For Architectural Decoration, Heat Transfer, And Other Diverse Applications.
Ideal For Diy Enthusiasts: If You're A Diy Buff, These Metal Sheets For Crafting Are Just What You Need; They Are Easy To Cut, Drill, And Modify To Your Desired Length, Making Them Ideally Adaptable For Your Projects; Their Weldability And Brazing Capacity Add To Their Diy Friendliness.
Quality And Durability: Crafted From Brass, These Decorative Metal Sheets Assure Users Of Good Mechanical Properties, Thermoplasticity, Cold Plasticity, And Machinability; While Brass Is Inherently Corrosion Resistant, Please Note That It Can Be Prone To Corrosion Cracks If Not Properly Maintained; Nevertheless, The Material's Quality Ensures Stable, Long Lasting Usage.
Brand: Yaocom | Manufacturer: Yaocom
See On Amazon #3
6 Pieces Brass Sheet 6 x 6 Inches 20 Gauge 0.8mm Thickness Brass Plates Double Sided Film Attached Metal Shims Thin Metal Sheets for Crafts DIY Decoration Hobbies
Asin: B0BKGL1JVC | Model: Nuogo-Brass-55 | PartNumber: Nuogo-Brass-55
Features
- Enough for Replacement: the package comes with 6 pieces of 20 gauge brass plates in total, with enough quantities to satisfy your various uses and replacement needs
- Size Information: each of our metal sheets for jewelry making measures approx. 15 x 15 cm/ 6 x 6 inches, with a thickness of about 0.8 mm/ 0.03 inch, a suitable size that can be processed into various parts
- Reliable to Use: our brass sheets are made of quality brass material, with nice mechanical properties, mechanical properties, hot plasticity, cold plasticity, and machinability, which are stable and corrosion resistant, but prone to corrosion cracks, easy to braze, and can be applied for a long time
- Double Sided Film: each 6 inch metal plate has a double sided film, which can provide protection for the surface of the copper sheet, keep it away from scratches, and avoid the surface from being oxidized at the same time
- Extensive Application: the metal plate sheet can be widely applicable for a variety of projects from art or hobby work to industrial and scientific uses, such as DIY projects, hobbies, crafts, architectural decorations, industrials, thermals and more
- See more on Amazon...
Reliable To Use: Our Brass Sheets Are Made Of Quality Brass Material, With Nice Mechanical Properties, Mechanical Properties, Hot Plasticity, Cold Plasticity, And Machinability, Which Are Stable And Corrosion Resistant, But Prone To Corrosion Cracks, Easy To Braze, And Can Be Applied For A Long Time.
Extensive Application: The Metal Plate Sheet Can Be Widely Applicable For A Variety Of Projects From Art Or Hobby Work To Industrial And Scientific Uses, Such As Diy Projects, Hobbies, Crafts, Architectural Decorations, Industrials, Thermals And More.
Double Sided Film: Each 6 Inch Metal Plate Has A Double Sided Film, Which Can Provide Protection For The Surface Of The Copper Sheet, Keep It Away From Scratches, And Avoid The Surface From Being Oxidized At The Same Time.
Size Information: Each Of Our Metal Sheets For Jewelry Making Measures Approx. 15 X 15 Cm/ 6 X 6 Inches, With A Thickness Of About 0.8 Mm/ 0.03 Inch, A Suitable Size That Can Be Processed Into Various Parts.
Brand: Nuogo | Manufacturer: Nuogo
See On Amazon #4
2 Pcs Brass Sheet, 6" x 6" x 0.04'', 18 Gauge(1.02mm) Thickness, No Scratches, Double-Side Film Attached Brass Plates
Asin: B09KRLYS5V | Model: BR01-1 | PartNumber: BR01-1
Features
- Quantity: 2 Pcs brass sheets
- Size: 6 x 6 x 0.04'' (152 x 152 x 1mm), 18 Gauge Thickness.
- H62 brass is an ordinary brass with an average copper content of 62%. It has good mechanical properties, good plasticity in the hot state and good plasticity in the cold state. It has good machinability. It is easy brazing and welding, and resistance to corrosion.
- No scratches, Double-sided film: Film attached on the double side of the brass sheet, which can protect the surface of brass to prevent scratches. It also prevents the surface from being oxidized.
- Package: Two pieces sheets are packaged in the sealed foam bag to prevent crushing and deformation during transportation.
- See more on Amazon...
H62 Brass Is An Ordinary Brass With An Average Copper Content Of 62%. It Has Good Mechanical Properties, Good Plasticity In The Hot State And Good Plasticity In The Cold State. It Has Good Machinability. It Is Easy Brazing And Welding, And Resistance To Corrosion..
Package: Two Pieces Sheets Are Packaged In The Sealed Foam Bag To Prevent Crushing And Deformation During Transportation..
No Scratches, Double-Sided Film: Film Attached On The Double Side Of The Brass Sheet, Which Can Protect The Surface Of Brass To Prevent Scratches. It Also Prevents The Surface From Being Oxidized..
Size: 6" X 6" X 0.04'' (152 X 152 X 1Mm), 18 Gauge Thickness..
Brand: Chudeng | Manufacturer: Chudeng
See On Amazon #5
Zonon 4 Pcs Brass Sheet 12 x 6 Inch, 26 Gauge (0.4mm) Thickness Metal Sheets No Scratches Metal Plates for Crafting Carving Stamping DIY Crafts Jewelry Models Repairs Electrical Home Improvement
Asin: B0CHF4V7JZ
Features
- Package Inclusion: this package provides a generous provision of 4 brass sheets; This quantity is appropriate for supporting your extensive DIY projects or for multiple uses, ensuring consistent results with most applications; You'll have what you need to assemble remarkably impressive crafts for a long time
- Quality Material: these brass craft metal sheets represent the epitome of quality, thanks to the quality brass material applied in their construction; The metallic brass material gives the sheets a glamorous gold color, making them aesthetically pleasing for use in most projects; Brass is a versatile material that can be easily shaped or cut into different forms, empowering your imagination and creation in all kinds of DIY crafts
- Suitable Size: each brass sheet metal measures about 12 x 6 inches/ 30 x 15 cm, 22 Gauge (0.4 mm) thick, ensuring you have enough working space for your various projects; Its thickness allows for it to be easily bent, cut, or drilled, while maintaining its flat shape; This makes it suitable for modelers, artists, and craft enthusiasts
- Versatility and Functionality: the metal sheets plates are not only an asset for creative craftsmen or artists, but can also be applied around the house in various DIY applications, from jewelry creation to home decor or repair work; Their multipurpose use provides a practical and aesthetically appealing solution to many design and repair projects
- Suitable for Various Occasions: with its brilliant gold color and sleek appearance, the brass plate is appropriate for a diverse range of occasions; They are an ideal choice for craft projects, hobby activities, architectural decoration, industry, heat conduction, school assignments, or just for personal enjoyment; They can be also processed into various parts, like gaskets and so on
- See more on Amazon...
Suitable Size: Each Brass Sheet Metal Measures About 12 X 6 Inches/ 30 X 15 Cm, 22 Gauge (0.4 Mm) Thick, Ensuring You Have Enough Working Space For Your Various Projects; Its Thickness Allows For It To Be Easily Bent, Cut, Or Drilled, While Maintaining Its Flat Shape; This Makes It Suitable For Modelers, Artists, And Craft Enthusiasts.
Suitable For Various Occasions: With Its Brilliant Gold Color And Sleek Appearance, The Brass Plate Is Appropriate For A Diverse Range Of Occasions; They Are An Ideal Choice For Craft Projects, Hobby Activities, Architectural Decoration, Industry, Heat Conduction, School Assignments, Or Just For Personal Enjoyment; They Can Be Also Processed Into Various Parts, Like Gaskets And So On.
Versatility And Functionality: The Metal Sheets Plates Are Not Only An Asset For Creative Craftsmen Or Artists, But Can Also Be Applied Around The House In Various Diy Applications, From Jewelry Creation To Home Decor Or Repair Work; Their Multipurpose Use Provides A Practical And Aesthetically Appealing Solution To Many Design And Repair Projects.
Quality Material: These Brass Craft Metal Sheets Represent The Epitome Of Quality, Thanks To The Quality Brass Material Applied In Their Construction; The Metallic Brass Material Gives The Sheets A Glamorous Gold Color, Making Them Aesthetically Pleasing For Use In Most Projects; Brass Is A Versatile Material That Can Be Easily Shaped Or Cut Into Different Forms, Empowering Your Imagination And Creation In All Kinds Of Diy Crafts.
Brand: Zonon | Manufacturer: Zonon
See On Amazon #6
Tandefio 2 Pcs Brass Sheet 12" x 6", 14 Gauge(0.06") Thickness Brass Plates Metal Film Attached Brass Plates for DIY Handicrafts Jewelry Model Crafts Repairs Electrical
Asin: B0CFQQGCWW | Model: CLO-Tandefio-0111 | PartNumber: CLO-Tandefio-0111
Features
- Package For Your Convenience: you won't need to worry about running out of brass sheets in the middle of your DIY or professional projects; Our pack comes with 2 pcs of quality brass sheets, providing enough material to meet your daily needs, big or small
- Suitable Size For Diverse Projects: each brass metal sheet in our pack is measured to fit your versatile needs; With a size of about 12 x 6 x 0.06 inches/ 30 x 15 x 0.15 cm (Length x Width x Thickness), these brass sheets are suitable for a wide range of applications, from DIY crafts to engineering projects
- Quality Material: our brass pates are made of H62 brass, its mechanical properties and plasticity are nice, both in hot and cold states, this ensures nice machinability and ease in brazing and welding, making your work smooth and easy
- Process Philosophy Ideal for handicrafts, enamel, copper restoration, jewelry making or electrical projects. Popular thick material for roof and waterproof layer. Bring some new color and textures into one of your craft projects. So many projects will enjoy this beautiful brass.
- Wide Ranging Applications: brass plates for DIY are one of the essential commodity in various fields; Our brass sheets are not only ideal for DIY crafts and jewelry making, but also applicable to electrical engineering, welding, creating models, building motors, gear shafts, motor shafts, and short supporting shafts
- See more on Amazon...
Quality Material: Our Brass Pates Are Made Of H62 Brass, Its Mechanical Properties And Plasticity Are Nice, Both In Hot And Cold States, This Ensures Nice Machinability And Ease In Brazing And Welding, Making Your Work Smooth And Easy.
Wide Ranging Applications: Brass Plates For Diy Are One Of The Essential Commodity In Various Fields; Our Brass Sheets Are Not Only Ideal For Diy Crafts And Jewelry Making, But Also Applicable To Electrical Engineering, Welding, Creating Models, Building Motors, Gear Shafts, Motor Shafts, And Short Supporting Shafts.
Process Philosophy： Ideal For Handicrafts, Enamel, Copper Restoration, Jewelry Making Or Electrical Projects. Popular Thick Material For Roof And Waterproof Layer. Bring Some New Color And Textures Into One Of Your Craft Projects. So Many Projects Will Enjoy This Beautiful Brass..
Suitable Size For Diverse Projects: Each Brass Metal Sheet In Our Pack Is Measured To Fit Your Versatile Needs; With A Size Of About 12 X 6 X 0.06 Inches/ 30 X 15 X 0.15 Cm (Length X Width X Thickness), These Brass Sheets Are Suitable For A Wide Range Of Applications, From Diy Crafts To Engineering Projects.
Brand: Tandefio | Manufacturer: Tandefio
See On Amazon #7
Feelers Copper Metal Brass Sheet Roll 38 Gauge x 8 inch x 40 inch, Brass Plate High Hardness Free-Cutting Brass Strip in Various Widths (4" Width)
Asin: B0B6ZWHYY3 | Model: 1-92150-strips | PartNumber: 1-92150-strips | Ean: 0756166995116 | UPC: 756166995116
Features
- Size - Thickness: 0.1mm/38 Gauge/0.0039", Length: 1000mm/39.4", Width: 200mm/7.9".
- Material : Made of seamless brass with polishing finish for high strength, clean ends, corrosion resistance and long-lasting durability. Can be used for conductive, thermal and welding.
- Process Philosophy - Ideal for handicrafts, enamel, copper restoration, jewelry making or electrical projects. Popular thick material for roof and waterproof layer. Bring some new color and textures into one of your craft projects. So many projects will enjoy this beautiful Copper.
- Widely Use : Because of its good ductibility, stamping, electroplating and corrosion resistance, brass belt is widely used in various complex cold stamping, roof waterproof systems, deep stamping hardware, radiator, automotive connectors, terminals, relays, DIY, water heaters, handicrafts, battery shrapnel and other industries.
- BE ATTENTION !!! - Safety overrides all else , i hope you guys do it carefully no matter where the brass Sheet roll will be used in.
- See more on Amazon...
【Process Philosophy】 - Ideal For Handicrafts, Enamel, Copper Restoration, Jewelry Making Or Electrical Projects. Popular Thick Material For Roof And Waterproof Layer. Bring Some New Color And Textures Into One Of Your Craft Projects. So Many Projects Will Enjoy This Beautiful Copper..
【Be Attention !!!】 - Safety Overrides All Else , I Hope You Guys Do It Carefully No Matter Where The Brass Sheet Roll Will Be Used In..
【Widely Use】: Because Of Its Good Ductibility, Stamping, Electroplating And Corrosion Resistance, Brass Belt Is Widely Used In Various Complex Cold Stamping, Roof Waterproof Systems, Deep Stamping Hardware, Radiator, Automotive Connectors, Terminals, Relays, Diy, Water Heaters, Handicrafts, Battery Shrapnel And Other Industries..
【Material】: Made Of Seamless Brass With Polishing Finish For High Strength, Clean Ends, Corrosion Resistance And Long-Lasting Durability. Can Be Used For Conductive, Thermal And Welding..
Brand: Feelers | Manufacturer: Feelers
See On Amazon #8
K&S Percision Metals 16404 Brass Sheet Metal Rack, 0.016" Thickness x 6" Width x 12" Length, 26 gauge, Made in USA
Asin: B000H5W9QG | Model: 16404 | PartNumber: 16404 | Ean: 0676116164044, 0676116064047 | UPC: 676116064047, 676116164044
Features
- Use for modeling, engineering and architecture projects
- Solid brass finish
- Shrink-wrapped
- Package Dimensions: 12.0 L x 6.0 W x 0.016 H
- See more on Amazon...
Shrink-Wrapped.
Package Dimensions: 12.0" L X 6.0" W X 0.016" H.
Solid Brass Finish.
First Available: 06/14/2018
Brand: K&S | Manufacturer: K & S Precision Metals
Dimensions: 0.02 x 12.00 x 6.00 inches | Weight: 0.37 pounds
Warranty: Warranty
See On Amazon #9
HYGMPDAS 2 Pcs Brass Sheet - 6'' x 6'' x 0.04"(18 Gauge), Brass Sheet Metal
Asin: B0B8GNYHNV | Model: BS-01 | PartNumber: BS-01 | Ean: 0600310069249 | UPC: 600310069249
Features
- Size You'll get 2pcs brass metal sheet with each size is 6''L x 6''W, 0.04" thickness.(tolerance of size: 2%)
- Material They are made of solid brass(H62), sturdy and not easy to corrode, bend or dent. Easy to cut with a hack saw.
- Brass Sheets Metal Its a touch for you and your husband's taste for some small home projects, such as jewelry or cuff bracelet making, spacers, fabricate some hardware pieces he needed for a furniture project.
- Features It comes coated with a plastic film on both sides to prevent the brass from scratching, ready to apply your own preferred finish.
- Application Very suitable for various projects such as arts, crafts, DIY or antique projects, building decoration, maintenance, electrical or industrial use.
- See more on Amazon...
【Brass Sheets Metal】Its A Touch For You And Your Husband's Taste For Some Small Home Projects, Such As Jewelry Or Cuff Bracelet Making, Spacers, Fabricate Some Hardware Pieces He Needed For A Furniture Project..
【Application】Very Suitable For Various Projects Such As Arts, Crafts, Diy Or Antique Projects, Building Decoration, Maintenance, Electrical Or Industrial Use..
【Features】It Comes Coated With A Plastic Film On Both Sides To Prevent The Brass From Scratching, Ready To Apply Your Own Preferred Finish..
【Material】They Are Made Of Solid Brass(H62), Sturdy And Not Easy To Corrode, Bend Or Dent. Easy To Cut With A Hack Saw..
Brand: HYGMPDAS | Manufacturer: HYGMPDAS
See On Amazon #10
Yaocom 6 Pieces Brass Plate 6 x 6, 18 Gauge(1mm) Thickness Brass Sheet Film Attached Metal Plates for Crafting Carving Stamping DIY Handicrafts Jewelry Models Repairs Electrical Home Improvement
Asin: B0CFLLTGF2
Features
- Package Content: each package includes 6 metal sheets for crafting; This count offers more than enough material for multiple projects or a few larger ones, marking it as a choice for those engaged in frequent crafting or DIY activities
- Size Information: these metal plates come in a square shape with dimensions of about 6 x 6, 18 gauge(1 mm) thickness; Crafted following the 18 gauge standard, they boast a thickness of 1 mm, striking the balance between sturdiness and flexibility; This ideal size and thickness make these brass sheets suitable for a wide array of applications
- Material Quality: these brass sheets are made from H62 brass, a kind of quality brass with physical properties; These properties include good strength and good malleability, making it an ideal material for various crafts and DIY projects; The authentic color of H62 brass gives these sheets a genuine yellow look that is visually appealing, making it a choice for decorative use
- Process Philosophy: ideal for handicrafts, enamel, copper restoration, jewelry making or electrical projects; Popular thick material and waterproof layer; Bring some color and textures into one of your craft projects; So many projects will enjoy this beautiful brass
- Wide Application: given their size, thickness, and the quality material applied, these flat metal plates have a wide range of applications; They can be applied for machine gaskets, jewelry, builders' hardware, crafts, and many other decorative or functional purposes; Show your creative muscles with these versatile brass sheets
- See more on Amazon...
Material Quality: These Brass Sheets Are Made From H62 Brass, A Kind Of Quality Brass With Physical Properties; These Properties Include Good Strength And Good Malleability, Making It An Ideal Material For Various Crafts And Diy Projects; The Authentic Color Of H62 Brass Gives These Sheets A Genuine Yellow Look That Is Visually Appealing, Making It A Choice For Decorative Use.
Wide Application: Given Their Size, Thickness, And The Quality Material Applied, These Flat Metal Plates Have A Wide Range Of Applications; They Can Be Applied For Machine Gaskets, Jewelry, Builders' Hardware, Crafts, And Many Other Decorative Or Functional Purposes; Show Your Creative Muscles With These Versatile Brass Sheets.
Process Philosophy: Ideal For Handicrafts, Enamel, Copper Restoration, Jewelry Making Or Electrical Projects; Popular Thick Material And Waterproof Layer; Bring Some Color And Textures Into One Of Your Craft Projects; So Many Projects Will Enjoy This Beautiful Brass.
Size Information: These Metal Plates Come In A Square Shape With Dimensions Of About 6" X 6", 18 Gauge(1 Mm) Thickness; Crafted Following The 18 Gauge Standard, They Boast A Thickness Of 1 Mm, Striking The Balance Between Sturdiness And Flexibility; This Ideal Size And Thickness Make These Brass Sheets Suitable For A Wide Array Of Applications.
Brand: Yaocom | Manufacturer: Yaocom
See On Amazon #11
LOYORTY 3 Pcs Brass Sheet 6 x 6 x 0.04 , 18 Gauge (1mm) Thickness, Film Attached Brass Plates, Brass Plate Sheet for Crafts DIY Decoration
Asin: B0CHVXB4TX | Model: Brass Sheet | PartNumber: Brass Sheet
Features
- Quantity: 3 Pcs brass sheets
- Dimension: 6 x 6 x 0.04 / 150 x 150 x 1mm, 18 gauge thickness
- Durable to use: our brass sheets are made of quality brass material, it has good mechanical properties, good plasticity in the hot state and good plasticity in the cold state, easy brazing and welding, and resistance to corrosion
- Packing: Film attached on the double side of the brass sheet, which protects the surface of the copper from scratches or damaging
- Wide Application: The brass plate sheet can be widely used for a variety of projects from art or hobby work to industrial and scientific uses, such as DIY projects, crafts, architectural decorations and more
- See more on Amazon...
Durable To Use: Our Brass Sheets Are Made Of Quality Brass Material, It Has Good Mechanical Properties, Good Plasticity In The Hot State And Good Plasticity In The Cold State, Easy Brazing And Welding, And Resistance To Corrosion.
Wide Application: The Brass Plate Sheet Can Be Widely Used For A Variety Of Projects From Art Or Hobby Work To Industrial And Scientific Uses, Such As Diy Projects, Crafts, Architectural Decorations And More.
Packing: Film Attached On The Double Side Of The Brass Sheet, Which Protects The Surface Of The Copper From Scratches Or Damaging.
Dimension: 6”X 6”X 0.04”/ 150 X 150 X 1Mm, 18 Gauge Thickness.
Brand: LOYORTY | Manufacturer: LOYORTY
See On Amazon #12
Brass Sheet, Metal Sheets Plates, 12" Length x 6" Width x 0.06" Thickness, 14 Gauge, Brass Plate Sheet
Asin: B09SH87C4Y | Model: BSP-380 | PartNumber: BSP-380 | Ean: 0670494603133 | UPC: 670494603133
Features
- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.
- Brass sheet is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use.
- Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc.
- Size: 0.06/1.5mm Thickness, 12 x 6(L*W)/300mm x 150mm, brass plate sheet.
- Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product.
- See more on Amazon...
Metal Sheets Plates Widely Used In Jewelry, Crafts, Maintenance, Electrical, Diy Projects, Architectural Decoration, Industry, Thermal Conductivity, Etc..
Reliable Service: As We Are So Strict With Our Quality, We Have Confidence. So We Would Refund 2 Times Price If You Receive Defective Product..
Size: 0.06"/1.5Mm Thickness, 12" X 6"(L*W)/300Mm X 150Mm, Brass Plate Sheet..
Brass Sheet Is Nicely Polished Up And Cut, Has High Strength And Hardness, No Scratches And Very Smooth, Safe To Use..
Brand: Tsmhisd | Manufacturer: Tsmhisd
See On Amazon #13
Daseyyue 1 Pcs C280 Brass Sheet, 11.8 Inch x 11.8 Inch x 0.032 Inch,20 Gauge(0.81mm) Thickness, No Scratches, Protective Film on Both Sides
Asin: B09MTQ8CM2 | Model: brass-0.8-12*12 | PartNumber: brass-0.8-12*12 | Ean: 0726434474186 | UPC: 726434474186
Features
- Quantity: 1 Pcs 11.8" x 11.8", , 20 Gauge(0.81mm) brass sheets
- Material:C280 brass Sheets. Easy to be cut and soldered
- Double-side Film: Every brass sheet has two sides films, which can protect the surface of brass to prevent scratches
- Package: Two pieces are packed in sealed foam bags, and the four corners are covered with corner covers to prevent deformation during transportation
- application Perfect for a large variety of projects ranging from arts, crafts, or hobbywork to industrial and scientific use
- See more on Amazon...
Double-Side Film: Every Brass Sheet Has Two Sides Films, Which Can Protect The Surface Of Brass To Prevent Scratches.
Application：Perfect For A Large Variety Of Projects Ranging From Arts, Crafts, Or Hobbywork To Industrial And Scientific Use.
Package: Two Pieces Are Packed In Sealed Foam Bags, And The Four Corners Are Covered With Corner Covers To Prevent Deformation During Transportation.
Material:C280 Brass Sheets. Easy To Be Cut And Soldered.
Brand: Daseyyue | Manufacturer: Daseyyue
Dimensions: 0.04 x 12.00 x 12.00 Inches
See On Amazon #14
uxcell Brass Sheet Roll, Metal Foil Plate 1000mm x100mm x 0.03mm
Asin: B08ZJDD7Q2 | Model: a20121400ux0199 | PartNumber: a20121400ux0199
Features
- Size: 0.03mm/0.0012" Thickness, 1000mm x 100mm/39.4" x 3.9"(L*W)
- Made of brass material, which has good mechanical properties and good machinability that can withstand hot and cold pressure processing, has good electrical conductivity, thermal conductivity, corrosion resistance, and processing performance, and is good at welding and brazing.
- Brass sheet roll can be welded, it can be processed to handicrafts, decorative parts, accessories, etc
- Applications: DIY projects, building decoration, industrial, electronic, equipment, hobbies, crafts, conduction heat, home improvement, electricity, stamping, engraving, and so on.
- Package Included: 1 x Brass Sheet Roll
- See more on Amazon...
Brass Sheet Roll Can Be Welded, It Can Be Processed To Handicrafts, Decorative Parts, Accessories, Etc.
Package Included: 1 X Brass Sheet Roll.
Applications: Diy Projects, Building Decoration, Industrial, Electronic, Equipment, Hobbies, Crafts, Conduction Heat, Home Improvement, Electricity, Stamping, Engraving, And So On..
Made Of Brass Material, Which Has Good Mechanical Properties And Good Machinability That Can Withstand Hot And Cold Pressure Processing, Has Good Electrical Conductivity, Thermal Conductivity, Corrosion Resistance, And Processing Performance, And Is Good At Welding And Brazing..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Brass Sheet, Brass Shim Stock, Metal Sheets Plates, 10" Length x 4" Width x 0.010" Thickness, Brass Plate Sheet, 6 Pieces
Asin: B09SGDNGXB | Model: BSP-90 | PartNumber: BSP-90 | Ean: 0670494603140 | UPC: 670494603140
Features
- Size: 0.010"/0.2mm Thickness, 10" x 4"(L*W)/250mm x 100mm, 6 Pieces
- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.
- Brass sheet is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use.
- Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc.
- Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product.
- See more on Amazon...
Brass Sheet Is Nicely Polished Up And Cut, Has High Strength And Hardness, No Scratches And Very Smooth, Safe To Use..
Reliable Service: As We Are So Strict With Our Quality, We Have Confidence. So We Would Refund 2 Times Price If You Receive Defective Product..
Metal Sheets Plates Widely Used In Jewelry, Crafts, Maintenance, Electrical, Diy Projects, Architectural Decoration, Industry, Thermal Conductivity, Etc..
Brass Sheet Is Made Of Brass Material, Nice Bend-Ability And Can Be Machined And Cut Into Various Parts Such As Gaskets, Washers, Shims And Spacers..
Brand: Tsmhisd | Manufacturer: Tsmhisd
See On Amazon #16
Daseyyue 1 Pcs Pure Brass Sheet, 5.9" x 5.9", 12 Gauge(0.079"/2mm) Thickness, No Scratches, Protective Film on Both Sides
Asin: B0C1Q7B1VN | Ean: 0726434474421 | UPC: 726434474421
Features
- Quantity: 1 Pcs 5.9" x 5.9", 0.78"/2mm brasss sheets
- Easy to be cut and soldered
- Double-side Film: Every Copper sheet has two sides films, which can protect the surface of copper to prevent scratches
- Package: One pieces are packed in sealed foam bags, and the four corners are covered with corner covers to prevent deformation during transportation
- application Perfect for a large variety of projects ranging from arts, crafts, or hobbywork to industrial and scientific use
- See more on Amazon...
Double-Side Film: Every Copper Sheet Has Two Sides Films, Which Can Protect The Surface Of Copper To Prevent Scratches.
Application：Perfect For A Large Variety Of Projects Ranging From Arts, Crafts, Or Hobbywork To Industrial And Scientific Use.
Package: One Pieces Are Packed In Sealed Foam Bags, And The Four Corners Are Covered With Corner Covers To Prevent Deformation During Transportation.
Easy To Be Cut And Soldered.
Brand: Daseyyue | Manufacturer: Daseyyue
Dimensions: 0.08 x 6.00 x 6.00 inches
See On Amazon #17
K&S Precision Metals 8239 Brass Strip, 0.025" Thickness x 2" Width x 12" Length, Made in USA
Asin: B004AFAY0W | Model: 8239 | PartNumber: 8239 | Ean: 0614121182394, 0614121102392 | UPC: 614121102392, 614121182394
Features
- 2 inch width x 12 inch length x .025 inch thickness
- Easy to bend, cut and shape
- For hobbies, model building, shims and spacers
- Brass assorted pieces
- See more on Amazon...
For Hobbies, Model Building, Shims And Spacers.
Brass Assorted Pieces.
Easy To Bend, Cut And Shape.
First Available: 06/14/2018
Brand: K&S | Manufacturer: K & S Precision Metals
Dimensions: 0.03 x 12.00 x 2.00 inches | Weight: 0.20 pounds
Warranty: Warranty
See On Amazon #18
Brass Strip, Brass Shim Stock Assortment, 1" Width x 6" Length, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness, 6 Pieces
Asin: B09V5LPSNB | Model: YRSA-02 | PartNumber: YRSA-02 | Ean: 0670494602808 | UPC: 670494602808
Features
- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.
- Brass shim stock assortment size: 6 Length x 1 Width, 0.002, 0.004, 0.006, 0.008, 0.012 and 0.016 Thickness.Nicely polished up.
- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.
- Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc.
- Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product.
- See more on Amazon...
Brass Sheet Is Made Of Brass Material, Nice Bend-Ability And Can Be Machined And Cut Into Various Parts Such As Gaskets, Washers, Shims And Spacers..
Reliable Service: As We Are So Strict With Our Quality, We Have Confidence. So We Would Refund 2 Times Price If You Receive Defective Product..
Metal Sheets Plates Widely Used In Jewelry, Crafts, Maintenance, Electrical, Diy Projects, Architectural Decoration, Industry, Thermal Conductivity, Etc..
Brass Shim Stock Assortment Size: 6" Length X 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" And 0.016" Thickness.Nicely Polished Up..
Brand: Tsmhisd | Manufacturer: Tsmhisd
See On Amazon #19
OLYCRAFT Rectangle Brass Sheet 6 Inch Length x 2 Inch Width x 1/8 Inch Thick Gold Brass Sheet Raw Brass Sheet Material Rectangle Metal Brass Sheet for Metal Stamping Models Repairs DIY Crafts
Asin: B0C86HX5C5
Features
- Packaging & Size--Inside the package is gold rectangle brass sheet, the size is about 1.97 inch/50mm wide, 6.06 inch/154mm long, 3mm thick.
- Brass Material--The brass sheet is made of quality brass material, has a smooth surface, high strength, not easy to break and durable.
- Thickened Brass Plate -- This brass plate is 3mm thick, the thickened size makes the brass plate stronger and can withstand many forms of processing such as hot and cold.
- Wide Applications--You can use the brass sheet roll to make DIY projects, they are also able to exert good performance in building decorations, industrial use, electronic equipment, and so on.
- Raw Material-- Our brass sheet is unplated, also a great product for the craft shop, blacksmith and copper smith to use.
- See more on Amazon...
Thickened Brass Plate -- This Brass Plate Is 3Mm Thick, The Thickened Size Makes The Brass Plate Stronger And Can Withstand Many Forms Of Processing Such As Hot And Cold..
Raw Material-- Our Brass Sheet Is Unplated, Also A Great Product For The Craft Shop, Blacksmith And Copper Smith To Use..
Wide Applications--You Can Use The Brass Sheet Roll To Make Diy Projects, They Are Also Able To Exert Good Performance In Building Decorations, Industrial Use, Electronic Equipment, And So On..
Brass Material--The Brass Sheet Is Made Of Quality Brass Material, Has A Smooth Surface, High Strength, Not Easy To Break And Durable..
Brand: OLYCRAFT | Manufacturer: OLYCRAFT
See On Amazon #20
K&S 16407 Brass Sheet, 0.032" Thick x 6" Wide x 12" Long, 1 Piece, Made in The USA
Asin: B0006MZOBW | Model: 16407 | PartNumber: 16407 | Ean: 0676116164075, 0676116064078 | UPC: 676116064078, 676116164075
Features
- .032 inch thickness
- Use for modeling, engineering and architecture projects
- Solid brass finish
- Shrink-wrapped
- See more on Amazon...
Solid Brass Finish.
Shrink-Wrapped.
Use For Modeling, Engineering And Architecture Projects.
First Available: 06/14/2018
Brand: K&S | Manufacturer: K & S Precision Metals
Dimensions: 0.03 x 12.00 x 6.00 Inches | Weight: 4.20 Pounds
Warranty: Warranty
See On Amazon #21
Uxney Brass Sheet,4" x 4"-14 Gauge(2mm) Thickness,99.9% Pure Brass Plates for DIY, Jewelry, Electrical, Repair, Industrial(1 Pac
Asin: B0CRP72ZP1
Features
- Brass Sheet Size :Thickness:2mm (0.08") | Width:100mm (4") | Length:100mm(4")
- High-Quality Material : Our Brass sheet is crafted from premium 99.9% pure brass, ensuring top-notch quality for your projects. Its exceptional thermal and electrical conductivity, along with corrosion resistance, make it a reliable choice.
- Versatile Applications : This brass sheet finds utility in various DIY projects across machinery, electronics, home appliances, and more. It's especially suitable for tasks requiring excellent electrical conductivity and thermal properties.
- Ease of Use : The brass sheet's smooth surface allows for easy cutting using metal shears or industrial machines, enabling you to customize it to your desired shape effortlessly. It's also conducive to welding for added flexibility.
- Packag : Contains 1 pieces of selected brass plates. The brass plates are double-sided with film to ensure that the product has no scratches. Please confirm the size carefully when purchasing.
- See more on Amazon...
【Versatile Applications】: This Brass Sheet Finds Utility In Various Diy Projects Across Machinery, Electronics, Home Appliances, And More. It's Especially Suitable For Tasks Requiring Excellent Electrical Conductivity And Thermal Properties..
【Packag】: Contains 1 Pieces Of Selected Brass Plates. The Brass Plates Are Double-Sided With Film To Ensure That The Product Has No Scratches. Please Confirm The Size Carefully When Purchasing..
【Ease Of Use】: The Brass Sheet's Smooth Surface Allows For Easy Cutting Using Metal Shears Or Industrial Machines, Enabling You To Customize It To Your Desired Shape Effortlessly. It's Also Conducive To Welding For Added Flexibility..
【High-Quality Material】: Our Brass Sheet Is Crafted From Premium 99.9% Pure Brass, Ensuring Top-Notch Quality For Your Projects. Its Exceptional Thermal And Electrical Conductivity, Along With Corrosion Resistance, Make It A Reliable Choice..
Brand: Uxney | Manufacturer: Uxney
See On Amazon #22
uxcell Brass Sheet, Metal Sheets Plates 3.9" Length x 3.9" Width x 0.06" Thickness
Asin: B08YJPP1JF | Model: a20112100ux0269 | PartNumber: a20112100ux0269
Features
- Size: 1.5mm/0.06" Thickness, 100mm x 100mm/3.9" x 3.9"(L*W)
- Made of brass material, which has good mechanical properties and good machinability, can withstand hot and cold pressure processing, has good electrical conductivity, thermal conductivity, corrosion resistance, and processing performance, and is good at welding and brazing.
- Brass sheet can be processed to various parts, such as gaskets, washers, crafts, etc.
- Applications: DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, home improvement, electricity, stamping, engraving, and so on.
- Package Included: 1 x Copper Sheet
- See more on Amazon...
Brass Sheet Can Be Processed To Various Parts, Such As Gaskets, Washers, Crafts, Etc..
Package Included: 1 X Copper Sheet.
Applications: Diy Projects, Hobbies, Crafts, Building Decoration, Industrial, Conduction Heat, Home Improvement, Electricity, Stamping, Engraving, And So On..
Made Of Brass Material, Which Has Good Mechanical Properties And Good Machinability, Can Withstand Hot And Cold Pressure Processing, Has Good Electrical Conductivity, Thermal Conductivity, Corrosion Resistance, And Processing Performance, And Is Good At Welding And Brazing..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #23
K & S 250 Brass Sheet, 0.005" Thick x 4" Wide x 10" Long, Made in The USA, Medium, Brass, 6 Pieces
Asin: B0006N6WLM | Model: 250 | PartNumber: 250 | Ean: 0614121002500 | UPC: 614121002500
Features
- Easy to bend, cut and shape
- For hobbies, model building, shims and spacers
- Brass assorted pieces
- Package Dimensions: 11.5 L x 4.5 W x 0.021 H
- See more on Amazon...
Brass Assorted Pieces.
Package Dimensions: 11.5" L X 4.5" W X 0.021" H.
For Hobbies, Model Building, Shims And Spacers.
First Available: 06/14/2018
Brand: K&S | Manufacturer: K & S Precision Metals
Dimensions: 0.01 x 10.00 x 4.00 Inches | Weight: 0.03 Pounds
See On Amazon #24
uxcell Brass Sheet Roll, 2Pcs 40" x 2" x 0.002" H62 Metal Foil Plate for Crafts, Electrical Repairs, Industry
Asin: B0CLJGYXZ5
Features
- Size: 0.05mm/0.002" Thickness, 1000mm x 50mm / 39.37" x 1.97"(L*W)
- Made of brass material, which has good mechanical properties and good machinability that can withstand hot and cold pressure processing, has good electrical conductivity, thermal conductivity, corrosion resistance, and processing performance, and is good at welding and brazing.
- Brass sheet roll can be welded, it can be processed to handicrafts, decorative parts, accessories, etc
- Applications: DIY projects, building decoration, industrial, electronic, equipment, hobbies, crafts, conduction heat, home improvement, electricity, stamping, engraving, and so on.
- Package Included: 2 x Brass Sheet Roll
- See more on Amazon...
Brass Sheet Roll Can Be Welded, It Can Be Processed To Handicrafts, Decorative Parts, Accessories, Etc.
Package Included: 2 X Brass Sheet Roll.
Applications: Diy Projects, Building Decoration, Industrial, Electronic, Equipment, Hobbies, Crafts, Conduction Heat, Home Improvement, Electricity, Stamping, Engraving, And So On..
Made Of Brass Material, Which Has Good Mechanical Properties And Good Machinability That Can Withstand Hot And Cold Pressure Processing, Has Good Electrical Conductivity, Thermal Conductivity, Corrosion Resistance, And Processing Performance, And Is Good At Welding And Brazing..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #25
Yaocom 6 Pieces Brass Sheet 6" x 6", 24 Gauge(0.5mm) Thickness Brass Plate for Engraving Film Attached Thin Metal Sheet Brass Stock for DIY Handicrafts Jewelry Repairs Electrical Home Improvement
Asin: B0CFLKPTFG
Features
- Package Content: each package comes with 6 brass sheets; This set is suitable to meet the special needs of your projects; These 6 pieces provide enough resource for a variety of applications, including tasks and fun DIY projects; Always have reserve for unexpected needs or for sharing with fellow hobbyists and craft person
- Size Information: uniformly sized to about 6 x 6, 24 gauge(0.5 mm) thickness in dimensions, these brass plates for engraving offer a large working surface area for your convenience; The 24 gauge (0.5 mm) thickness provides the balance of sturdiness and workability; These are easy to cut or shape as per your application requirements without losing strength or integrity
- Quality Material: made from quality H62 Brass, these metal sheets for crafting offer good ductility and thermal conductivity; The inherent properties of brass mean these sheets are designed to withstand different elements and last longer; It's a reliable ally for projects, from craft to professional applications
- Process Philosophy: ideal for handicrafts, enamel, copper restoration, jewelry making or electrical projects; Popular thick material and waterproof layer; Bring some color and textures into one of your craft projects; So many projects will enjoy this beautiful brass
- Wide Application: with their inherent qualities and robustness, these flat metal plates prove to be versatile; They serve a wide range of applications in diverse fields such as art and craft projects, jewelry making, metalworking, mechanical models, electrical projects, and DIY projects, and more; Express your creativity or complete tasks with ease
- See more on Amazon...
Quality Material: Made From Quality H62 Brass, These Metal Sheets For Crafting Offer Good Ductility And Thermal Conductivity; The Inherent Properties Of Brass Mean These Sheets Are Designed To Withstand Different Elements And Last Longer; It's A Reliable Ally For Projects, From Craft To Professional Applications.
Wide Application: With Their Inherent Qualities And Robustness, These Flat Metal Plates Prove To Be Versatile; They Serve A Wide Range Of Applications In Diverse Fields Such As Art And Craft Projects, Jewelry Making, Metalworking, Mechanical Models, Electrical Projects, And Diy Projects, And More; Express Your Creativity Or Complete Tasks With Ease.
Process Philosophy: Ideal For Handicrafts, Enamel, Copper Restoration, Jewelry Making Or Electrical Projects; Popular Thick Material And Waterproof Layer; Bring Some Color And Textures Into One Of Your Craft Projects; So Many Projects Will Enjoy This Beautiful Brass.
Size Information: Uniformly Sized To About 6" X 6", 24 Gauge(0.5 Mm) Thickness In Dimensions, These Brass Plates For Engraving Offer A Large Working Surface Area For Your Convenience; The 24 Gauge (0.5 Mm) Thickness Provides The Balance Of Sturdiness And Workability; These Are Easy To Cut Or Shape As Per Your Application Requirements Without Losing Strength Or Integrity.
Brand: Yaocom | Manufacturer: Yaocom
See On Amazon #26
uxcell Brass Sheet Roll, 0.3x10x1000mm Brass Foil Roll Brass Strip Gold for Crafts, Electrical Repairs, Grounding
Asin: B0BYT53R5J
Features
- Package Includes - The package includes 1pcs of brass sheet roll that measures the panel dimension is 10mmx1000mm / 0.39''x 39.4'' (W*L), thickness is 0.3mm.
- H62 Brass Material - Made of H62 brass, for high strength, good weldability, good plasticity, and corrosion resistance, and can be used for conductive.
- Features - The brass foil sheet with a smooth surface, and is great for laser cut patterns, welding, and brazing.
- Special Design - It is flexible, and can be twisted, bent, and torn, which is easy to use and for long-lasting use. Great for decorating any items or DIY repairs, such as plants, cups, glass, other agricultural products, etc.
- Widely Application - Suitable for crafts, crafting, wedding arrangements, electronic experiment, the manufacture of various kinds of deep drawing and bending force components, instruments, ship parts, building decoration, industrial, electronic, equipment, etc.
- See more on Amazon...
Features - The Brass Foil Sheet With A Smooth Surface, And Is Great For Laser Cut Patterns, Welding, And Brazing..
Widely Application - Suitable For Crafts, Crafting, Wedding Arrangements, Electronic Experiment, The Manufacture Of Various Kinds Of Deep Drawing And Bending Force Components, Instruments, Ship Parts, Building Decoration, Industrial, Electronic, Equipment, Etc..
Special Design - It Is Flexible, And Can Be Twisted, Bent, And Torn, Which Is Easy To Use And For Long-Lasting Use. Great For Decorating Any Items Or Diy Repairs, Such As Plants, Cups, Glass, Other Agricultural Products, Etc..
H62 Brass Material - Made Of H62 Brass, For High Strength, Good Weldability, Good Plasticity, And Corrosion Resistance, And Can Be Used For Conductive..
Brand: uxcell | Manufacturer: uxcell
See On Amazon #27
Tynulox 12 Gauge Brass Sheet H62 Brass Plates Metal 0.079" Thickness x 3.9" Width x 3.9" Lenght, for Models, Crafts, Repairs, Electrical, 2Pcs
Asin: B0BLN9XNVS | Model: 3A-02305-brasssheet | PartNumber: 3A-02305-brasssheet | Ean: 0756166340459 | UPC: 756166340459
Features
- Size -12 Gauge x 3.9" x 3.9" (2mm x 100mm x 100mm), 2 Pcs
- Material -H62 brass. The content of brass is 62%.
- Features - Brass has good strong heat transfer capability and Electrical conductivity. In addition, it isn t affected by corrosion, temperature and pressure.
- Nice Appearance -Brass bars are widely used in DIY handicrafts, jewelry, decoration, electrical engineering, welding, models, motors, gear shafts, motor shafts and short supporting shafts.
- Multiple Sizes -You can choose diversiform sizes of brass sheets. Thickness: 6-20 Ga(0.8-4 mm), Length: 3.9-5.9(100-150 mm), Width: 3.9-5.9(100-150 mm). If you have any requirements, please send us Amazon Message.
- See more on Amazon...
【Features】- Brass Has Good Strong Heat Transfer Capability And Electrical Conductivity. In Addition, It Isn’T Affected By Corrosion, Temperature And Pressure..
【Multiple Sizes】-You Can Choose Diversiform Sizes Of Brass Sheets. Thickness: 6-20 Ga(0.8-4 Mm), Length: 3.9-5.9"(100-150 Mm), Width: 3.9-5.9"(100-150 Mm). If You Have Any Requirements, Please Send Us Amazon Message..
【Nice Appearance】-Brass Bars Are Widely Used In Diy Handicrafts, Jewelry, Decoration, Electrical Engineering, Welding, Models, Motors, Gear Shafts, Motor Shafts And Short Supporting Shafts..
【Material】-H62 Brass. The Content Of Brass Is 62%..
Brand: Tynulox | Manufacturer: Yirde
See On Amazon #28
Generic 1/8"" Brass Sheet Plate New 4""X6"" .125 Thick *Custom Sizes Available*
Asin: B0CZYLSCZM
Brand: Generic | Manufacturer: Miscellaneous
Dimensions: 0.13 x 4.00 x 6.00 Inches | Weight: 0.93 Pounds
See On Amazon #29
8 Pieces Brass Sheet, Brass Shim Stock Assortment, 6" Length x 3" Width, 0.001", 0.002", 0.004", 0.006", 0.008",0.012", 0.016", 0.02" Thickness, Brass Metal Shim Stock
Asin: B0BXJHDPLV | Model: SHBR-9812 | PartNumber: SHBR-9812 | Ean: 0614161248418 | UPC: 614161248418
Features
- ----- Our brass shim stock assortment include 8 thicknesses, which can meet your different needs in daily life. You deserve it.
- ----- Brass sheet is made of quality brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.
- ----- Brass shim stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use.
- ----- Brass shim widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc.
- ----- Shim stock assortment size: 6 Length x 3 Width, 0.001, 0.002, 0.004, 0.006, 0.008,0.012, 0.016, 0.02 Thickness, you will use them one day.
- See more on Amazon...
✔----- Brass Shim Stock Is Nicely Polished Up And Cut, Has High Strength And Hardness, No Scratches And Very Smooth, Safe To Use..
✔----- Shim Stock Assortment Size: 6" Length X 3" Width, 0.001", 0.002", 0.004", 0.006", 0.008",0.012", 0.016", 0.02" Thickness, You Will Use Them One Day..
✔----- Brass Shim Widely Used In Jewelry, Crafts, Maintenance, Electrical, Diy Projects, Architectural Decoration, Industry, Thermal Conductivity, Etc..
✔----- Brass Sheet Is Made Of Quality Brass Material, Nice Bend-Ability And Can Be Machined And Cut Into Various Parts Such As Gaskets, Washers, Shims And Spacers..
Brand: twecoinp | Manufacturer: twecoinp
See On Amazon #30
Uxney Brass Sheet,4" x 8"-18 Gauge(1mm) Thickness,99.9% Pure Brass Plates for DIY, Jewelry, Electrical, Repair, Industrial(2 Pac
Asin: B0CRP4XVMY
Features
- Brass Sheet Size :Thickness:1mm (0.04") | Width:100mm (4") | Length:200mm(8")
- High-Quality Material : Our Brass sheet is crafted from premium 99.9% pure brass, ensuring top-notch quality for your projects. Its exceptional thermal and electrical conductivity, along with corrosion resistance, make it a reliable choice.
- Versatile Applications : This brass sheet finds utility in various DIY projects across machinery, electronics, home appliances, and more. It's especially suitable for tasks requiring excellent electrical conductivity and thermal properties.
- Ease of Use : The brass sheet's smooth surface allows for easy cutting using metal shears or industrial machines, enabling you to customize it to your desired shape effortlessly. It's also conducive to welding for added flexibility.
- Packag : Contains 2 pieces of selected brass plates. The brass plates are double-sided with film to ensure that the product has no scratches. Please confirm the size carefully when purchasing.
- See more on Amazon...
【Versatile Applications】: This Brass Sheet Finds Utility In Various Diy Projects Across Machinery, Electronics, Home Appliances, And More. It's Especially Suitable For Tasks Requiring Excellent Electrical Conductivity And Thermal Properties..
【Packag】: Contains 2 Pieces Of Selected Brass Plates. The Brass Plates Are Double-Sided With Film To Ensure That The Product Has No Scratches. Please Confirm The Size Carefully When Purchasing..
【Ease Of Use】: The Brass Sheet's Smooth Surface Allows For Easy Cutting Using Metal Shears Or Industrial Machines, Enabling You To Customize It To Your Desired Shape Effortlessly. It's Also Conducive To Welding For Added Flexibility..
【High-Quality Material】: Our Brass Sheet Is Crafted From Premium 99.9% Pure Brass, Ensuring Top-Notch Quality For Your Projects. Its Exceptional Thermal And Electrical Conductivity, Along With Corrosion Resistance, Make It A Reliable Choice..
Brand: Uxney | Manufacturer: Uxney
See On Amazon
Looking For Something Else?
Search