Best Replacement Cell Phone Backs - Buying Guide
Last Updated: 05/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
8pcs 3M Sticky Adhesive Replacement Pads for Socket Base Mount,VIIMAKE 1.38 inches Round 3M VHB Double-Sided Adhesive Pads,for Phone Collapsible Grip Stand Back Base Sticker Tapes (Red)
Asin: B0922S9F7Q | Model: 3MRO-148 | PartNumber: 3MRO-148
Features
- Easy to Tear off :We have upgraded the quality of 3M VHB black gel, the red film is easy to tear, unlike the red base film on the market, it is difficult to peel off.Polymer adhesive, strong stickness and high temperature.
- Used for Socket Base :Offers 8 Pcs adhesive pads(Diameter: 1.38 inches).This round double sided adhesive replacement parts designed for socket base,they can greatly extend the life of your expanding phone grips stand.
- Instructions for use : Clean the area to be attached and keep it dry When the tape is glued, apply the appropriate pressure evenly, please hold down for 10 to 30 seconds Step After pasting, it is recommended not to use immediately, to maintain the stability of the later paste, the better the effect is after 24 hours of pasting, the longer the sticking time, the stronger the stickiness.(3M Vhb adhesive pad is one-time use item)
- Application Technology :Replacement adhesive pads, with strong viscosity, good UV resistance, solvent resistance, softness and good conformability.To achieve the bonding effect, the bonding surface must be clean and dry.The temperature range of tape application is 21-38 .It is recommended that if the initial bonding temperature is lower than 10 ,it is not suitable for bonding.Can be used in home, bathroom,mirror,refrigerator,bed,wall,locker,office,etc.But it can NOT be used in silicone case.
- Important Note :To achieve the bonding effect, the bonding surface must be clean and dry.Come with 4 pack alcohol pads help you clean the area where you d like to place. Be sure the mounting surface and socket base you have cleaned before you stick the adhesive. The temperature range of tape application is 21-38 . It is recommended that if the initial bonding temperature is lower than 10 , it is not suitable for bonding.
- See more on Amazon...
【Instructions For Use】: ①Clean The Area To Be Attached And Keep It Dry②when The Tape Is Glued, Apply The Appropriate Pressure Evenly, Please Hold Down For 10 To 30 Seconds Step③after Pasting, It Is Recommended Not To Use Immediately, To Maintain The Stability Of The Later Paste, The Better The Effect Is After 24 Hours Of Pasting, The Longer The Sticking Time, The Stronger The Stickiness.(3M Vhb Adhesive Pad Is One-Time Use Item).
【Important Note】:To Achieve The Bonding Effect, The Bonding Surface Must Be Clean And Dry.Come With 4 Pack Alcohol Pads Help You Clean The Area Where You’D Like To Place. Be Sure The Mounting Surface And Socket Base You Have Cleaned Before You Stick The Adhesive. The Temperature Range Of Tape Application Is 21-38℃. It Is Recommended That If The Initial Bonding Temperature Is Lower Than 10℃, It Is Not Suitable For Bonding..
【Application Technology】:Replacement Adhesive Pads, With Strong Viscosity, Good Uv Resistance, Solvent Resistance, Softness And Good Conformability.To Achieve The Bonding Effect, The Bonding Surface Must Be Clean And Dry.The Temperature Range Of Tape Application Is 21-38℃.It Is Recommended That If The Initial Bonding Temperature Is Lower Than 10℃,It Is Not Suitable For Bonding.Can Be Used In Home, Bathroom,Mirror,Refrigerator,Bed,Wall,Locker,Office,Etc.But It Can Not Be Used In Silicone Case..
【Used For Socket Base】:Offers 8 Pcs Adhesive Pads(Diameter: 1.38 Inches).This Round Double Sided Adhesive Replacement Parts Designed For Socket Base,They Can Greatly Extend The Life Of Your Expanding Phone Grips Stand..
Brand: VIIMAKE | Manufacturer: VIIMAKE
Dimensions: 0.04 x 1.38 x 1.38 inches
See On Amazon #2
volport Metal Plate for Phone Magnet, 10 Pack MagicPlate with 3M Adhesive Replacement for Magnetic Phone Car Mount Holder & Cradle & Stand (Vent/CD/Windshield/Dashboard) - Rectangle and Round
Asin: B01DKEXMVG | Model: VM0004US | PartNumber: VM0004US | Ean: 0607569677782 | UPC: 607569677782
Features
- This extra strength car magnet metal plate with 3m glue double-sided adhesive mat is attachable to use with automotive magnetic mobile phone car mount, magnetic air vent mount, other magnetic cellphone car mount, magicmount, wall mount and magnet phone carrier for car gps navigation. Variety of replacement metal plates stuff for adjustable magnetic cell phone holder. Packet of black steel plates sheets are just METAL included clear protective liner WITHOUT MAGNETISM.
- 4 pack wide replacement strip & ferrous 6 pack circle rust-free round magnet mount plates sticking with strong 3m adhesive backing attraction - universal 8 pack square shaped metal plates & spare 40mm circles metal disks. Powerful and detachable rectangular thin mettel plate for holding up cell phones is compatible with iphone 15 pro max iphone 15 pro iphone 15 plus iphone 15 iphone 14 pro max iphone 14 pro iphone 14 mini iphone 13 pro max iphone 13 mini iphone 13 iphone xs max iphone xr tablet.
- Ultra thin metallic plate pieces and add no perceptible bulky works for backed your phone attachment or inner silicone case or portable monitor or navigation device. Thick phone mount plate disc sticks and holds up for laminated cell phone magnets disk piece and adhesive plates allows you to place on smartphone horizontal or vertical. Heavy duty large disk matt magic plate dots is a great replacement kits for tractor vehicle caravans suv truck to clip on the backer of multiples smart phones.
- Durable and stainless 8 pack skinny metal strap tag console attached with both side self adhesive fit for cell phone magnet patch and additional circular 2 pack extra small iron metal plates panel inserts with sticky pad part as backups. You can replace the multipack anti scratch extra tiny metal plates. These car mount magnet plates with removable 3m double sided tape are also great additions replacement kit parts fixed for rear various heavy phone cases.Just simple peel and stick!
- Big metal mounting plate with no hole along with universal replaceable magnetic mounts for magnets devices, cameras, light monitors, kitchen, livingroom chair, emergency light, desktop, dashboard, vents, cd slot, suction power, magic mount, desk, windshield or windows. Volport metal plates is a little bigger and thicker than others normal plates that's just for better holding. For wireless charging, please place the friendly metal plate built in adhesion on the phone away from charging sensor.
- See more on Amazon...
Ultra Thin Metallic Plate Pieces And Add No Perceptible Bulky Works For Backed Your Phone Attachment Or Inner Silicone Case Or Portable Monitor Or Navigation Device. Thick Phone Mount Plate Disc Sticks And Holds Up For Laminated Cell Phone Magnets Disk Piece And Adhesive Plates Allows You To Place On Smartphone Horizontal Or Vertical. Heavy Duty Large Disk Matt Magic Plate Dots Is A Great Replacement Kits For Tractor Vehicle Caravans Suv Truck To Clip On The Backer Of Multiples Smart Phones..
Big Metal Mounting Plate With No Hole Along With Universal Replaceable Magnetic Mounts For Magnets Devices, Cameras, Light Monitors, Kitchen, Livingroom Chair, Emergency Light, Desktop, Dashboard, Vents, Cd Slot, Suction Power, Magic Mount, Desk, Windshield Or Windows. Volport Metal Plates Is A Little Bigger And Thicker Than Others Normal Plates That's Just For Better Holding. For Wireless Charging, Please Place The Friendly Metal Plate Built In Adhesion On The Phone Away From Charging Sensor..
Durable And Stainless 8 Pack Skinny Metal Strap Tag Console Attached With Both Side Self Adhesive Fit For Cell Phone Magnet Patch And Additional Circular 2 Pack Extra Small Iron Metal Plates Panel Inserts With Sticky Pad Part As Backups. You Can Replace The Multipack Anti Scratch Extra Tiny Metal Plates. These Car Mount Magnet Plates With Removable 3M Double Sided Tape Are Also Great Additions Replacement Kit Parts Fixed For Rear Various Heavy Phone Cases.Just Simple Peel And Stick!.
4 Pack Wide Replacement Strip & Ferrous 6 Pack Circle Rust-Free Round Magnet Mount Plates Sticking With Strong 3M Adhesive Backing Attraction - Universal 8 Pack Square Shaped Metal Plates & Spare 40Mm Circles Metal Disks. Powerful And Detachable Rectangular Thin Mettel Plate For Holding Up Cell Phones Is Compatible With Iphone 15 Pro Max Iphone 15 Pro Iphone 15 Plus Iphone 15 Iphone 14 Pro Max Iphone 14 Pro Iphone 14 Mini Iphone 13 Pro Max Iphone 13 Mini Iphone 13 Iphone Xs Max Iphone Xr Tablet..
Brand: volport | Manufacturer: volport
Dimensions: 0.12 x 3.94 x 2.36 Inches | Weight: 0.19 pounds
See On Amazon #3
Perzework OEM Rear Back Glass Replacement Compatible with iPhone 14 Pro 6.1 inches with Reparing Toolkit (Space Black)
Asin: B0CRD359HN
Features
- Brand New and High Quality OEM Back Glass Replacement (Space Black) for iPhone 14 Pro 6.1 inches.Tested one by one by professional technicist before shipping. This replacement back door will repair your cracked, damaged, scratched phone. Restore the device back to new.
- Bigger camera hole No need to remove the camera lens as the new back glass is with a bigger camera hole. You can install the new back glass replacement directly after removing the old broken glass. It is much easier for you.
- Easy Installation 3M waterproof adhesive are pre-installed. Illustrated installation manual is included and it contains specific operation steps for your reference to DIY.
- Comes with Full Set Toolkit It comes with a full set professional repair toolkit. It is much easier for you to remove the broken back glass.Please note that you need to prepare a hair dryer,becasuse the original adhesive is very strong.
- Risk-Free Shopping and Quality Warranty one year warranty for this back glass cover replacement. We can send a new rear back glass or full refund if you are not 100% satisfied with our products .Please feel free to contact us if you have any questions.
- See more on Amazon...
【Easy Installation】3M Waterproof Adhesive Are Pre-Installed. Illustrated Installation Manual Is Included And It Contains Specific Operation Steps For Your Reference To Diy..
【Risk-Free Shopping And Quality Warranty】 One Year Warranty For This Back Glass Cover Replacement. We Can Send A New Rear Back Glass Or Full Refund If You Are Not 100% Satisfied With Our Products .Please Feel Free To Contact Us If You Have Any Questions..
【Comes With Full Set Toolkit】It Comes With A Full Set Professional Repair Toolkit. It Is Much Easier For You To Remove The Broken Back Glass.Please Note That You Need To Prepare A Hair Dryer,Becasuse The Original Adhesive Is Very Strong..
【Bigger Camera Hole】No Need To Remove The Camera Lens As The New Back Glass Is With A Bigger Camera Hole. You Can Install The New Back Glass Replacement Directly After Removing The Old Broken Glass. It Is Much Easier For You..
Brand: Perzework | Manufacturer: Perzework
See On Amazon #4
VizGiz 4 Pack Mount Metal Plate for Magnetic Car Mount Vehicle Air Vent Dashboard Holder Cradle Strong Adhesive Sticker Replacement Magnet Patch Universal Circular Disc for Mobile Phone GPS MP4
Asin: B08SLM8KQ6 | Ean: 0796862621933 | UPC: 796862621933
Features
- Note: (1)That's just metal plate,not a magnet. (2)The metal plate itself not with magntic.specially used for magntic phone holder.
- Package included: 4 Round Plate ( 4 Colors: Black, Silver, Rose Gold & Gold )
- Replace magnet plate perfectly and work along with universal magnetic smartphone holder, magnetic air vent mount and dashboard magnet car mount.
- The metal sheet is extremely thin so that it can be hidden inside of phone case without adding bulk. 0.1cm/ 0.039 thick
- Provide you 4 color options to apply on multiple color mobile phones. Color perfect matches Apple iPhone 6S, 7, 7Plus, 8, 8Plus Black, Rose Gold and Gold
- Simply stick this metal disc onto the back of your phone or put it between cellphone and its phone case. NOTE For phone case thicker than 1mm, please stick it on the outside of the case to avoid interference with magnetism.
- Applied with strong adhesive sticker on the back, phone mount plate sticks on your phone back firmly and securely. No worry of falling off. NOTE After you stick the metal plate, please wait for 24 hours before using to make sure it sticks firmly.
- See more on Amazon...
Replace Magnet Plate Perfectly And Work Along With Universal Magnetic Smartphone Holder, Magnetic Air Vent Mount And Dashboard Magnet Car Mount..
Applied With Strong Adhesive Sticker On The Back, Phone Mount Plate Sticks On Your Phone Back Firmly And Securely. No Worry Of Falling Off. ★Note★ After You Stick The Metal Plate, Please Wait For 24 Hours Before Using To Make Sure It Sticks Firmly..
Provide You 4 Color Options To Apply On Multiple Color Mobile Phones. Color Perfect Matches Apple Iphone 6S, 7, 7Plus, 8, 8Plus Black, Rose Gold And Gold.
Simply Stick This Metal Disc Onto The Back Of Your Phone Or Put It Between Cellphone And Its Phone Case. ★Note★ For Phone Case Thicker Than 1Mm, Please Stick It On The Outside Of The Case To Avoid Interference With Magnetism..
The Metal Sheet Is Extremely Thin So That It Can Be Hidden Inside Of Phone Case Without Adding Bulk. 0.1Cm/ 0.039" Thick.
Package Included: 4 Round Plate ( 4 Colors: Black, Silver, Rose Gold & Gold ).
Brand: VizGiz | Manufacturer: VizGiz
See On Amazon #5
D.Sking 12 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base VHB Sticker Pads for Collapsible Grip & Stand
Asin: B0B2MVSDB8 | Ean: 6462819225038
Features
- 3M VHB black gel, the red film is easy to tear, unlike the red base film on the market, it is difficult to peel off.Polymer adhesive, strong stickness and high temperature.
- 12 Pcs adhesive pads(Diameter: 1.38 inches).This round double sided adhesive replacement parts designed for socket base,they can greatly extend the life of your expanding phone grips stand.
- Replaceable Alcohol Pads Extra: Clean the chosen area to place your smartphone. Make sure the mounting surface and base of mount adhesive mat tags clear cleaned completely before attaching to affix and secure a new blanks 3M adhesive stickers backers for car mount. For the ultra thin 2 sided 3M adhesive tapes dots, please just one piece use one time,if you stick wrong,please use new one.
- Replacement adhesive pads, with strong viscosity, good UV resistance, solvent resistance, softness and good conformability.To achieve the bonding effect, the bonding surface must be clean and dry.The temperature range of tape application is 21-38 .It is recommended that if the initial bonding temperature is lower than 10 ,it is not suitable for bonding.
- What You Get:12 pcs 3M stick pads,2 PACK alcohol pads,these particular type of adhesive very handy.If have any problems,can contact our service.
- See more on Amazon...
Replaceable Alcohol Pads Extra: Clean The Chosen Area To Place Your Smartphone. Make Sure The Mounting Surface And Base Of Mount Adhesive Mat Tags Clear Cleaned Completely Before Attaching To Affix And Secure A New Blanks 3M Adhesive Stickers Backers For Car Mount. For The Ultra Thin 2 Sided 3M Adhesive Tapes Dots, Please Just One Piece Use One Time,If You Stick Wrong,Please Use New One..
What You Get:12 Pcs 3M Stick Pads,2 Pack Alcohol Pads,These Particular Type Of Adhesive Very Handy.If Have Any Problems,Can Contact Our Service..
Replacement Adhesive Pads, With Strong Viscosity, Good Uv Resistance, Solvent Resistance, Softness And Good Conformability.To Achieve The Bonding Effect, The Bonding Surface Must Be Clean And Dry.The Temperature Range Of Tape Application Is 21-38℃.It Is Recommended That If The Initial Bonding Temperature Is Lower Than 10℃,It Is Not Suitable For Bonding..
12 Pcs Adhesive Pads(Diameter: 1.38 Inches).This Round Double Sided Adhesive Replacement Parts Designed For Socket Base,They Can Greatly Extend The Life Of Your Expanding Phone Grips Stand..
Brand: D.Sking | Manufacturer: D.Sking
Dimensions: 0.04 x 1.38 x 1.38 inches | Weight: 0.02 Pounds
See On Amazon #6
APPS2Car 10 Pack 3M Double Sided Adhesive Pads for Socket Mount Base Circle Adhesive Replacement VHB Sticky Tape for Phone Collapsible Grip & Stand Back 1.38 Inches (35mm)
Asin: B0CYPZWFLL
Features
- 10Pcs VHB Circle Adhesive Pads - APPS2Car offers a set of 10 original 3M VHB double-sided adhesive pads (Diameter: 1.38 inches), specifically designed for compatibility with collapsible grip socket bases. These pads feature double-side pressure sensitivity, providing strong adhesion even in high temperatures.
- High Bond Round 3M Adhesive Pads - The stickiness of the 3M VHB circle replacement pads is 40% stronger than that of ordinary sticky pads. These high-strength, double-sided adhesive pads allow for quick and easy creation of long-lasting bonds on various surfaces. To achieve optimal bonding, ensure that the surface is clean, dry, and free from contaminants.
- Multiple Uses - Suitable for adhering to a variety of materials with flat hard surfaces, these adhesive pads can be used in homes, bathrooms, offices, on phones, mirrors, refrigerators, beds, posts, walls, lockers, vehicles, and other related equipment. However, they are not suitable for use on silicone cases.
- Instructions for Use - To maximize adhesive contact, please ensure that the adhesive surface is clean and free from contaminants before use. Begin by peeling off the yellow side of the adhesive pad and attaching it to the collapsible grip base. Apply pressure to the adhesive pad, then peel off the red film side and attach the collapsible grip to your phone case. Press firmly for 1-2 minutes. Better results are achieved when allowing 24 hours after installation before use.
- What You Get - This product includes a set of 10 heavy-duty 3M VHB double-sided adhesive pads, along with 5 alcohol pads for cleaning surfaces prior to application. Additionally, a Lifetime Warranty and access to Official Technical Support are provided with your purchase.
- See more on Amazon...
Multiple Uses - Suitable For Adhering To A Variety Of Materials With Flat Hard Surfaces, These Adhesive Pads Can Be Used In Homes, Bathrooms, Offices, On Phones, Mirrors, Refrigerators, Beds, Posts, Walls, Lockers, Vehicles, And Other Related Equipment. However, They Are Not Suitable For Use On Silicone Cases..
What You Get - This Product Includes A Set Of 10 Heavy-Duty 3M Vhb Double-Sided Adhesive Pads, Along With 5 Alcohol Pads For Cleaning Surfaces Prior To Application. Additionally, A Lifetime Warranty And Access To Official Technical Support Are Provided With Your Purchase..
Instructions For Use - To Maximize Adhesive Contact, Please Ensure That The Adhesive Surface Is Clean And Free From Contaminants Before Use. Begin By Peeling Off The Yellow Side Of The Adhesive Pad And Attaching It To The Collapsible Grip Base. Apply Pressure To The Adhesive Pad, Then Peel Off The Red Film Side And Attach The Collapsible Grip To Your Phone Case. Press Firmly For 1-2 Minutes. Better Results Are Achieved When Allowing 24 Hours After Installation Before Use..
High Bond Round 3M Adhesive Pads - The Stickiness Of The 3M Vhb Circle Replacement Pads Is 40% Stronger Than That Of Ordinary Sticky Pads. These High-Strength, Double-Sided Adhesive Pads Allow For Quick And Easy Creation Of Long-Lasting Bonds On Various Surfaces. To Achieve Optimal Bonding, Ensure That The Surface Is Clean, Dry, And Free From Contaminants..
Brand: APPS2Car | Manufacturer: Wiiki-Tech
Warranty: Lifetime Warranty
See On Amazon #7
Very High Bond Sticky Adhesive, AZXYI 12 Pack Socket Sticky Adhesive Replacement Kit, 1.4 inches Double-Sided Stickers for Collapsible Grips Socket Base
Asin: B08CKNQYR6 | Model: AZXYI-12A | PartNumber: AZXYI-12A | Ean: 0717066347207 | UPC: 717066347207
Features
- 12Pcs Sticky Adhesives Replacement AZXYI offers 12 Pcs adhesive pads(Diameter: 1.4 inches) compatible with collapsible grips socket base, double-side pressure sensitive for attaching socket back to your cellphone.
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the collapsible grip base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the collapsible grip to your phone case.
- Very High Bond These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.
- Genuine Adhesive Pads The best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time.
- See more on Amazon...
【Very High Bond】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond Attaching Various Substrates/Surfaces, Stable Even In Bumpy Roads And Actually Builds Strength Over Time..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time..
【Genuine Adhesive Pads】The Best Sticky Tapes For Phone Collapsible Grip We Provide Is With High Temperature Resistance And Stronger Stickiness Features. It Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Collapsible Grip Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Collapsible Grip To Your Phone Case..
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 0.03 x 1.38 x 1.38 inches | Weight: 0.02 pounds
See On Amazon #8
Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),16PCS Metal Plates for Phone Case,Metal Plate for Car,Metal Plates for Phone(8 Rectangle and 8 Round) S-07N(Black)
Asin: B0CQQXLL8R | Model: S-07N-5 | PartNumber: S-07N-5
Features
- 4.5 cm x 6.5 cm rectangular thin metal plate (8Pcs), diameter 4 cm ( 8Pcs) round metal plates
- Please note that the metal plate does not have magnets. They are the only spare parts compatible with magnetic mounts
- Stick to the back of your phone or put it between your phone and the case.The Adhesive magnetic plate has strong adhesion, which can keep your equipment stable and safe during driving.
- If you stick a phone magnet plate on the back of your phone or phone case, you may disable wireless charging.Suggest to take the case off when use wireless charging
- 100% SATISFACTION Contact us if you are not satisfied, we promise that we will make it right for you.
- See more on Amazon...
Stick To The Back Of Your Phone Or Put It Between Your Phone And The Case.The Adhesive Magnetic Plate Has Strong Adhesion, Which Can Keep Your Equipment Stable And Safe During Driving..
100% Satisfaction Contact Us If You Are Not Satisfied, We Promise That We Will Make It Right For You..
If You Stick A Phone Magnet Plate On The Back Of Your Phone Or Phone Case, You May Disable Wireless Charging.Suggest To Take The Case Off When Use Wireless Charging.
Please Note That The Metal Plate Does Not Have Magnets. They Are The Only Spare Parts Compatible With Magnetic Mounts.
Brand: Pau1Hami1ton | Manufacturer: Pau1Hami1ton
Dimensions: 0.39 x 5.12 x 3.54 inches
See On Amazon #9
pop-tech Sticky Adhesive Replacement for Magnetic Car Mount, 8PCS Circular Heat Resistant 3M VHB Double Sided Strong Sticker Pads for Magnet Cell Phone Stand & Finger Ring Holder & Socket Grip Mount
Asin: B08LGLCB7W | Ean: 0728360149596 | UPC: 728360149596
Features
- Used for magnetic phone car mount: Exclusively designed for various magnetic cell phones car mount bases with a diameter about 1 inch (23 mm), the car adhesive compatible with magnet socket & cell phone finger ring holder, including dashcam. This adhesive is extremely strong, and allow you to transfer an old tops sockets from one case to another. Take note of the size: they are small round ones not large circles. Red multi-use 8 PACK Smaller adhesive part for hands free car smartphone mount.
- Very High Bond 3M Automotive Adhesives Replacement: Selection of high-quality Genuine 3M VHB adhesive pad, 3m circle adhesive double sided, provides strong and durable support, high temperature, low temperature resistant, stronger than ordinary 3M sticky self-adhesive pads. Much better than find a new one, maybe you are looking to replace the tapes that came with your car mount which lasted a whopping months then started to fall. The performance of these discs is exactly what you are expecting.
- EASY TO USE: Just peel off the paper from both sides and stick the thin adhesive double sided pad to the item, and convenient to remove it without any residual glue, save your time and energy. To make the adhesive reuse more stickiness for best result, please first clean the mounting surface with cleaning pad provided. Use a card to pry the old damage, after removed the old one, place the new adhesive. Make the tags clear cleaned completely before attaching to affix blanks backers for carmount.
- Extra cleaning pads: to maximize 3m vhb adhesive pads contact perfectly, please let it dry after cleaning the surface with wet wipe, stuck and wait at least 24 hours to never let any air in after installation. These geniune 3M adhesive are cut to the correct sizes for the holder clip. For the ultra adhesive dots, if the cradle-less adhesion tabs hard to be tearable, try to press it back and peel again. You can fixate the adhesive and position the idols in the dash with lightly leather textured
- 100% Satisfactory Service: Standard size heavy duty refills adhesive patches backup. We provide 18-month warranty and lifetime technical support for best after-sale service. Please do not hesitate to contact us if you have any questions about our car mount adhesive and our customer service team is stand by 24 hours of the day to solve your problems. All we want is your satisfaction. With friendly customer service, if you're unsatisfied for any reason, we'll immediately refund your purchase price
- See more on Amazon...
Easy To Use: Just Peel Off The Paper From Both Sides And Stick The Thin Adhesive Double Sided Pad To The Item, And Convenient To Remove It Without Any Residual Glue, Save Your Time And Energy. To Make The Adhesive Reuse More Stickiness For Best Result, Please First Clean The Mounting Surface With Cleaning Pad Provided. Use A Card To Pry The Old Damage, After Removed The Old One, Place The New Adhesive. Make The Tags Clear Cleaned Completely Before Attaching To Affix Blanks Backers For Carmount..
100% Satisfactory Service: Standard Size Heavy Duty Refills Adhesive Patches Backup. We Provide 18-Month Warranty And Lifetime Technical Support For Best After-Sale Service. Please Do Not Hesitate To Contact Us If You Have Any Questions About Our Car Mount Adhesive And Our Customer Service Team Is Stand By 24 Hours Of The Day To Solve Your Problems. All We Want Is Your Satisfaction. With Friendly Customer Service, If You're Unsatisfied For Any Reason, We'll Immediately Refund Your Purchase Price.
Extra Cleaning Pads: To Maximize 3M Vhb Adhesive Pads Contact Perfectly, Please Let It Dry After Cleaning The Surface With Wet Wipe, Stuck And Wait At Least 24 Hours To Never Let Any Air In After Installation. These Geniune 3M Adhesive Are Cut To The Correct Sizes For The Holder Clip. For The Ultra Adhesive Dots, If The Cradle-Less Adhesion Tabs Hard To Be Tearable, Try To Press It Back And Peel Again. You Can Fixate The Adhesive And Position The Idols In The Dash With Lightly Leather Textured.
Very High Bond 3M Automotive Adhesives Replacement: Selection Of High-Quality Genuine 3M Vhb Adhesive Pad, 3M Circle Adhesive Double Sided, Provides Strong And Durable Support, High Temperature, Low Temperature Resistant, Stronger Than Ordinary 3M Sticky Self-Adhesive Pads. Much Better Than Find A New One, Maybe You Are Looking To Replace The Tapes That Came With Your Car Mount Which Lasted A Whopping Months Then Started To Fall. The Performance Of These Discs Is Exactly What You Are Expecting..
Brand: pop-tech | Manufacturer: pop-tech
See On Amazon #10
Statik SnapLoop Phone Magnets for Back of Phone - Magnetic Ring for Phone Case, Magnet for Phone Case Adapter Sticker for Wireless Charging Android, iPhone Magnetic Ring - 2 Pack
Asin: B0CCQ7DT3H | Ean: 0810024054541 | UPC: 810024054541
Features
- : Transform any phone case into a magnetized case with the Statik SnapLoop. This magnetic ring for phone case makes it easy to connect to magnet accessories, including magnetic car mounts, power banks, card wallets, and more. Works flawlessly with Apple iPhone, Android, Samsung, and other smartphones. Simply stick the Statik SnapLoop onto your case and connect.
- : Empower your smartphone with the convenience of wireless charging. Our 3x stronger magnetic connection ensures your phone remains secure on your car mount or magnetic wallet. Leverage the benefits of magnetic stickers for phone with any standard phone case. Works with magnetic car mounts, desk charger docks, power banks, card wallets, and more.
- , : The Statik SnapLoop magnetic ring provides a powerful, secure connection for your phone and wallet. Our ring magnet is designed not to let your phone fall off your magnetic car mount, adding another layer of security to your device with these magnet stickers for phone case. Magnetic rings for phones make magnet rings easier than ever to make a phone magnet ring.
- : Experience the aesthetically pleasing silicone rubber finish of our phone magnet sticker. The slim profile of SnapLoop makes it nearly invisible on your case, making it perfect for all types of smartphones. It's soft to the touch and slim enough that you hardly notice it s even there.
- - : The magnet ring for phone case is easy to install and remove. Simply peel, stick, press to attach Statik SnapLoop to your phone. If needed, peel it off your case without any sticky residue left behind. Enjoy the convenience of magnetic circles for your phone without any complications.
- See more on Amazon...
𝐏𝐨𝐰𝐞𝐫𝐟𝐮𝐥, 𝐒𝐞𝐜𝐮𝐫𝐞 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧: The Statik Snaploop Magnetic Ring Provides A Powerful, Secure Connection For Your Phone And Wallet. Our Ring Magnet Is Designed Not To Let Your Phone Fall Off Your Magnetic Car Mount, Adding Another Layer Of Security To Your Device With These Magnet Stickers For Phone Case. Magnetic Rings For Phones Make Magnet Rings Easier Than Ever To Make A Phone Magnet Ring..
𝐇𝐚𝐬𝐬𝐥𝐞-𝐅𝐫𝐞𝐞 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐑𝐞𝐦𝐨𝐯𝐚𝐥: The Magnet Ring For Phone Case Is Easy To Install And Remove. Simply Peel, Stick, Press To Attach Statik Snaploop To Your Phone. If Needed, Peel It Off Your Case Without Any Sticky Residue Left Behind. Enjoy The Convenience Of Magnetic Circles For Your Phone Without Any Complications..
𝐒𝐨𝐟𝐭 𝐚𝐧𝐝 𝐒𝐦𝐨𝐨𝐭𝐡 𝐒𝐢𝐥𝐢𝐜𝐨𝐧𝐞 𝐑𝐮𝐛𝐛𝐞𝐫 𝐅𝐢𝐧𝐢𝐬𝐡: Experience The Aesthetically Pleasing Silicone Rubber Finish Of Our Phone Magnet Sticker. The Slim Profile Of Snaploop Makes It Nearly Invisible On Your Case, Making It Perfect For All Types Of Smartphones. It's Soft To The Touch And Slim Enough That You Hardly Notice It’S Even There..
𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐂𝐡𝐚𝐫𝐠𝐢𝐧𝐠 𝐚𝐧𝐝 𝐒𝐭𝐫𝐨𝐧𝐠𝐞𝐫 𝐌𝐚𝐠𝐧𝐞𝐭𝐢𝐜 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧: Empower Your Smartphone With The Convenience Of Wireless Charging. Our 3X Stronger Magnetic Connection Ensures Your Phone Remains Secure On Your Car Mount Or Magnetic Wallet. Leverage The Benefits Of Magnetic Stickers For Phone With Any Standard Phone Case. Works With Magnetic Car Mounts, Desk Charger Docks, Power Banks, Card Wallets, And More..
Brand: Statik | Manufacturer: Curv Group LLC
Dimensions: 0.12 x 3.06 x 2.12 inches
See On Amazon
Looking For Something Else?
Search