Best Towing Hub Conversion Kits - Buying Guide
Last Updated: 05/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Yukon Gear & Axle Spin Free Locking Hub Conversion Kit for 2012-2017 Dodge 2500/3500, SRW (YA WU-13)
Asin: B019XNJEQ0 | Model: YA WU-13 | PartNumber: YA WU-13 | Ean: 0883584218104 | UPC: 883584218104
Features
- Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
- Fits 2012-2017 Dodge 2500/3500
- Technical Note: May not fit OE wheels for 2013+ models. Design changes to some factory wheels eliminated the removable center caps and step down the ID of the wheel, not allowing it to clear the wheel hub
- Limited Lifetime Against Manufacturer Defects for as long as you own the vehicle
- Increases Reliability
- Improves Cost of Ownership by Reducing Wear
- Dramatic increase is axle strength and reliability
- Simple bolt on installation- No machining or welding
- Maintains stock brakes and ABS sensors
- Fit type: Vehicle Specific
- See more on Amazon...
Technical Note: May Not Fit Oe Wheels For 2013+ Models. Design Changes To Some Factory Wheels Eliminated The Removable Center Caps And Step Down The Id Of The Wheel, Not Allowing It To Clear The Wheel Hub.
Fit Type: Vehicle Specific.
Dramatic Increase Is Axle Strength And Reliability.
Simple Bolt On Installation- No Machining Or Welding.
Increases Reliability.
Improves Cost Of Ownership By Reducing Wear.
Limited Lifetime Against Manufacturer Defects For As Long As You Own The Vehicle.
Maintains Stock Brakes And Abs Sensors.
Fits 2012-2017 Dodge 2500/3500.
First Available: 02/28/2019
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear & Axle
Dimensions: 14.00 x 32.00 x 14.00 inches | Weight: 63.75 Pounds
Warranty: Limited Lifetime warranty against manufacturer defects for as long as you own the vehicle
See On Amazon #2
Yukon Gear & Axle (YA WU-04) Spin Free Locking Hub Conversion Kit for Dodge SRW Dana 60 AAM Differential
Asin: B0078U9ZEM | Model: YA WU-04 | PartNumber: YA WU-04 | Ean: 0883584217282 | UPC: 883584217282
Features
- "locking hub conversion kit for '00-'08 dodge dana 60 and 9.25"" front, single rear wheel design"
- the yukon worry free spin free kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races
- the result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon
- this hub kit also includes low-profile yukon hardcore premium locking hubs, giving you more driving selectability
- this kit includes new wheel hubs, spindles, high strength yukon 4340 chrome-moly outer axles, yukon hardcore premium locking hubs, timken bearings, high quality seals and all hardware for installation
- Fit type: Vehicle Specific
- See more on Amazon...
The Result Is Not Only A Design Which Is Easier And More Economical To Service, But One That Offers Significant Increases In Mileage Per Gallon.
This Kit Includes New Wheel Hubs, Spindles, High Strength Yukon 4340 Chrome-Moly Outer Axles, Yukon Hardcore Premium Locking Hubs, Timken Bearings, High Quality Seals And All Hardware For Installation.
Fit Type: Vehicle Specific.
This Hub Kit Also Includes Low-Profile Yukon Hardcore Premium Locking Hubs, Giving You More Driving Selectability.
The Yukon Worry Free Spin Free Kit Replaces The Vulnerable And Expensive Factory Unit Bearings With Tapered Bearings And Races.
Brand: Yukon Gear | Manufacturer: Yukon
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 93.00 Pounds
Warranty: Limited Lifetime warranty against manufacturer defects for as long as you own the vehicle
See On Amazon #3
MILEMARKER Mile Marker Mile Marker 95-32721 Conversion Nut Kit
Asin: B000VSMSWY | Model: 95-32721 | PartNumber: 95-32721 | Ean: 0758626327215 | UPC: 758626327215
Features
- Fit type: Vehicle Specific
- 1 ton use
- Use with a Mile Marker 449S/S
- NOTE: The kit is required on Ford super duty trucks prior to model year 1999 that have an in cab controlled 4WD Vacuum system. If the truck already has factory manual lock-outs or after market manual lock-out, the conversion kit is not needed.
- See more on Amazon...
Use With A Mile Marker 449S/S.
Note: The Kit Is Required On Ford Super Duty Trucks Prior To Model Year 1999 That Have An In Cab Controlled 4Wd Vacuum System. If The Truck Already Has Factory Manual Lock-Outs Or After Market Manual Lock-Out, The Conversion Kit Is Not Needed..
1 Ton Use.
First Available: 12/05/2012
Brand: MILE MARKER | Manufacturer: Mile Marker
Dimensions: 3.50 x 4.00 x 3.25 inches | Weight: 0.10 Pounds
Warranty: 1-year
See On Amazon #4
Anxingo 95-32720 Hub Conversion Kit Replacement for Mile Marker 302 60-97 Bronco F-100 F-150 F-250
Asin: B0B5N1YHNY
Features
- Hub Conversion: Locking Hub Spindle Nut Conversion .
- Used with a Mile Marker 302 or 104 hub.
- High quality: Excellent design ensures structural integrity, superior durable material and great performance for longer use.
- Suitable for most vehicle models.
- Check Hub Application Chart For Correct Fit For Your Vehicle.
- See more on Amazon...
High Quality: Excellent Design Ensures Structural Integrity, Superior Durable Material And Great Performance For Longer Use..
Check Hub Application Chart For Correct Fit For Your Vehicle..
Suitable For Most Vehicle Models..
Used With A Mile Marker 302 Or 104 Hub..
Brand: Anxingo | Manufacturer: Anxingo
See On Amazon #5
MILEMARKER Mile Marker 95-27997 Hub Nut Conversion Kit
Asin: B000RZFOGS | Model: 95-27997 | PartNumber: 95-27997 | Ean: 6391847880073, 0758626279972 | UPC: 758626279972
Features
- Includes 4 nuts and 2 locking rings
- Changes automatic hubs to manual locking hubs
- Lightweight, strong and corrosion resistant
- Provides better fuel economy
- Enhances and protects your vehicle's drive train system
- See more on Amazon...
Lightweight, Strong And Corrosion Resistant.
Enhances And Protects Your Vehicle's Drive Train System.
Provides Better Fuel Economy.
Changes Automatic Hubs To Manual Locking Hubs.
First Available: 06/07/2007
Brand: MILE MARKER | Manufacturer: Mile Marker
Dimensions: 3.50 x 4.00 x 3.25 inches | Weight: 1.00 pounds
See On Amazon #6
WARN 32721 Locking Hub Spindle Nut Conversion Kit
Asin: B000CQI040 | Model: 32721 | PartNumber: 32721 | Ean: 0012748327219 | UPC: 012748327219
Features
- Expertly designed to fit with WARN flange mount hub sets
- This kit will fit the following WARN hub sets: 38826 and 11690
- A service kit is composed of a various collection of O-rings to aid in maintaining WARN hub sets
- Essential for maintenance and repairs of certain WARN models
- See more on Amazon...
A Service Kit Is Composed Of A Various Collection Of O-Rings To Aid In Maintaining Warn Hub Sets.
Essential For Maintenance And Repairs Of Certain Warn Models.
This Kit Will Fit The Following Warn Hub Sets: 38826 And 11690.
Brand: WARN | Manufacturer: Warn
Dimensions: 3.50 x 4.25 x 4.25 inches | Weight: 0.00 Pounds
Warranty: Warranty
See On Amazon #7
Alloy USA Axle Locking Hub Conversion Kit for Ford/Mazda | Converts Automatic Hubs to Manual Hubs | 15003.65 | Fits 1990-1997 Ford F-150/F-250/F-350/Ranger; 1994-1997 B2300/B3000/B4000 & Others
Asin: B003LYZTCQ | Model: 15003.65 | PartNumber: 15003.65 | Ean: 0804314222529 | UPC: 804314222529
Features
- FITMENT | Fits 1990-1997 Ford F-150/F-250/F-350/Ranger; 1990-1993 Mazda B2200/B2600; 1994-1997 Mazda B2300/B3000/B4000; 1991-1994 Mazda Navajo
- Manual Locking Hub Conversion Kit
- 2WD/4WD
- Limited 5 Year Warranty
- See more on Amazon...
2Wd/4Wd.
Limited 5 Year Warranty.
Manual Locking Hub Conversion Kit.
Brand: Alloy USA | Manufacturer: Rugged Ridge
Dimensions: 6.00 x 8.00 x 8.00 inches | Weight: 5.40 Pounds
Warranty: 5 Year Limited
See On Amazon #8
Mile Marker 95-27988 Hub Conversion Kit Automatic To Manual Hub Conversion Kit
Asin: B003EOBZR6 | Model: 95-27988 | PartNumber: 95-27988 | Ean: 0758626279880 | UPC: 758626279880
Features
- Country Of Origin: United States
- Model Number: 95-27988
- Item Package Dimension: 4.0 L x 4.0 W x 4.0 H
- Item Package Weight: 1.0 lb
- See more on Amazon...
Item Package Dimension: 4.0" L X 4.0" W X 4.0" H.
Item Package Weight: 1.0 Lb.
Model Number: 95-27988.
Brand: MILE MARKER | Manufacturer: Mile Marker
Dimensions: 3.50 x 4.00 x 3.25 inches
See On Amazon #9
Dynatrac Free Spin Heavy Duty Front Hub Conversion Kit 00-08 Ram 2500 / 3500
Asin: B009XOFELO
Features
- Increases reliability
- Lower cost of ownership- wheel bearings and seals are dramatically cheaper to maintain and can be easily serviced longer life, even under severe conditions
- Dramatic increase is axle strength and reliability with induction-hardened alloy 35 spline 1.50 axle shafts
- Simple bolt on installation- No machining or welding
- Maintains stock brakes and ABS sensors. 3500 DRW models will require custom front wheel spacers
- See more on Amazon...
Dramatic Increase Is Axle Strength And Reliability With Induction-Hardened Alloy 35 Spline 1.50" Axle Shafts.
Maintains Stock Brakes And Abs Sensors. 3500 Drw Models Will Require Custom Front Wheel Spacers.
Simple Bolt On Installation- No Machining Or Welding.
Lower Cost Of Ownership- Wheel Bearings And Seals Are Dramatically Cheaper To Maintain And Can Be Easily Serviced Longer Life, Even Under Severe Conditions.
Brand: Dynatrac | Manufacturer: Dynatrac
Dimensions: 5.00 x 14.00 x 14.00 inches | Weight: 89.56 Pounds
See On Amazon #10
Klmnduo Trailer Idler Hub Kits for 3500 lbs Trailer 1-1/16" to 1-3/8" Axle, 5 Lug Trailer Hub with L44649 L68149 Bearing Kit
Asin: B0C8NBVBNZ | Model: KL-QC0010-1 | PartNumber: KL-QC0010-1
Features
- Complete Trailer Hub Kit with Extra Caps and Seals Our trailer idler hub kit is designed to fit 3500lbs 1-1/16'' to 1-3/8'' trailer axles, including Spindle #84 and EZ-Lube Axle. In this value-packed set, you will receive 1 set of 5x4.5'' trailer hubs and all the necessary hardware, eliminating the need to search for additional parts. Additionally, we provide 2 extra dust caps and 4 rubber seals as spare parts for emergency situations.
- Durable and Rust-Resistant Construction The hardware in this kit is constructed from high-quality steel and rubber, providing strength and durability. The wheel hub surface is coated with a black finish, while the dust cap surface is zinc-plated. These measures protect against corrosion and rust, ensuring long-term service life for your trailer.
- Precise Size and Compatibility The kit includes a trailer axle dust cap with an outer diameter of 1.98'', L44649 outer bearings with a 1-1/16'' inner diameter, L68149 inner bearings with a 1-3/8'' inner diameter, grease seals with a 2.56'' outer diameter and 1.72'' inner diameter, and lug nuts with a 1/2''-20 thread. Please ensure that these sizes and specifications match your requirements before placing an order. The kit is designed to fit 1-1/16'' to 1-3/8'' spindles for 3500-pound trailers.
- Versatile and Compatible Whether you have a boat trailer, utility trailer, or camper, this trailer hub kit is designed to meet your needs. It offers compatibility with a wide range of trailers, providing a versatile solution for various towing applications.
- Satisfaction Guarantee We stand behind the quality of our products, and your satisfaction is our top priority. If for any reason you are not completely satisfied, please don't hesitate to contact us. We offer a hassle-free replacement or a full refund, ensuring that you can make your purchase with confidence.
- See more on Amazon...
【Precise Size And Compatibility】The Kit Includes A Trailer Axle Dust Cap With An Outer Diameter Of 1.98'', L44649 Outer Bearings With A 1-1/16'' Inner Diameter, L68149 Inner Bearings With A 1-3/8'' Inner Diameter, Grease Seals With A 2.56'' Outer Diameter And 1.72'' Inner Diameter, And Lug Nuts With A 1/2''-20 Thread. Please Ensure That These Sizes And Specifications Match Your Requirements Before Placing An Order. The Kit Is Designed To Fit 1-1/16'' To 1-3/8'' Spindles For 3500-Pound Trailers..
【Satisfaction Guarantee 】We Stand Behind The Quality Of Our Products, And Your Satisfaction Is Our Top Priority. If For Any Reason You Are Not Completely Satisfied, Please Don't Hesitate To Contact Us. We Offer A Hassle-Free Replacement Or A Full Refund, Ensuring That You Can Make Your Purchase With Confidence..
【Versatile And Compatible】Whether You Have A Boat Trailer, Utility Trailer, Or Camper, This Trailer Hub Kit Is Designed To Meet Your Needs. It Offers Compatibility With A Wide Range Of Trailers, Providing A Versatile Solution For Various Towing Applications..
【Durable And Rust-Resistant Construction】The Hardware In This Kit Is Constructed From High-Quality Steel And Rubber, Providing Strength And Durability. The Wheel Hub Surface Is Coated With A Black Finish, While The Dust Cap Surface Is Zinc-Plated. These Measures Protect Against Corrosion And Rust, Ensuring Long-Term Service Life For Your Trailer..
Brand: Klmnduo | Manufacturer: Klmnduo
See On Amazon #11
Saree 2 Sets Trailer Hub Kit 5 on 4.5", Trailer Axle Kit for 3500 Lbs 5 Lug Trailer Hub,5 4.5 Trailer Hub fit 1"-1/16" to 1-3/8"Trailer Axles 3500Lbs,Boat Trailer Hubs 5 Lug,Trailer Wheel Hub Kit
Asin: B0C9T8ZBMK | Model: 22017K | PartNumber: 22017K | Ean: 0666186772218 | UPC: 666186772218
Features
- Parameter specification Trailer Hub Kits fits 1-1/16" to 1-3/8" axles for 3500 lbs trailers (#84 Spindle EZ-Lube Axle). Dust Cap (O.D: 1.98"), L44649 Outer Bearing (I.D: 1-1/16"), L68149 Inner Bearing (I.D: 1-3/8"), Grease Seals (2.56" O.D. - 1.72" I.D.), Lug Nuts (1/2"-20 thread).Please check Bearings model size Grease Seals and Axles size information and compatibility before purchasing hub kits.Avoid installation incompatibility!!!
- What you will get You will receive: 2pcs hub kits (5 bolts 4.5 for 3500lbs), 2pcs L44649 Outer bearings (I.D: 1-1/16), 2pcs L68149 Inner bearings (I.D: 1-3/8), 10pcs Lug nuts (1/2-20 threads), 2PCS Dust Caps (O.D: 1.98), 2PCS Grease Seals (O.D 2.56 - I.D 1.72). Our 5*4.5 idler hub kits offer 1 year warranty, during this period you can contact me at any time and I will reply within 24 hours. PS.Not include castle nuts and cotter pin
- Improve trailer performance The trailer wheel hub kits are coated in black and the dust cover surface is galvanized to prevent corrosion and rust. Installing the 22017k idler hub kit on the trailer axle can help the spindle hub to easily cope with high speed rotation and reduce the coefficient of friction of the hub, you will enjoy excellent vibration resistance, wear resistance and good reusability, which can completely solve the problems of trailer spindle wobbling and oil leakage.
- Reliable Cast iron trailer hubs have excellent strength and rigidity for applications subjected to heavy loads and harsh environments, and idler hubs 3500lbs have high resistance to friction and wear. Cast iron hub kits are able to reduce friction when the wheel is rotating at high speeds, ensuring the stability and operational safety. Cast iron wheel hub kits have better heat transfer properties than regular 5 on 4.5 wheel kits, which helps dissipate heat and reduces the risk of overheating.
- Easy to install and individually wrapped The 5 lug trailer hub kits contains rigorously tested and certified high-quality fittings that provide stable support and protection to ensure the reliability and durability of the hub at high rotational speeds. The 5*4.5 idler hub kits come with pre-installed bearing housings and bolts for easy installation. The boat wheel hub kits are individually packaged to minimize wear and tear during shipping.
- See more on Amazon...
【Improve Trailer Performance】The Trailer Wheel Hub Kits Are Coated In Black And The Dust Cover Surface Is Galvanized To Prevent Corrosion And Rust. Installing The 22017K Idler Hub Kit On The Trailer Axle Can Help The Spindle Hub To Easily Cope With High Speed Rotation And Reduce The Coefficient Of Friction Of The Hub, You Will Enjoy Excellent Vibration Resistance, Wear Resistance And Good Reusability, Which Can Completely Solve The Problems Of Trailer Spindle Wobbling And Oil Leakage..
【Easy To Install And Individually Wrapped】The 5 Lug Trailer Hub Kits Contains Rigorously Tested And Certified High-Quality Fittings That Provide Stable Support And Protection To Ensure The Reliability And Durability Of The Hub At High Rotational Speeds. The 5*4.5 Idler Hub Kits Come With Pre-Installed Bearing Housings And Bolts For Easy Installation. The Boat Wheel Hub Kits Are Individually Packaged To Minimize Wear And Tear During Shipping..
【Reliable】Cast Iron Trailer Hubs Have Excellent Strength And Rigidity For Applications Subjected To Heavy Loads And Harsh Environments, And Idler Hubs 3500Lbs Have High Resistance To Friction And Wear. Cast Iron Hub Kits Are Able To Reduce Friction When The Wheel Is Rotating At High Speeds, Ensuring The Stability And Operational Safety. Cast Iron Wheel Hub Kits Have Better Heat Transfer Properties Than Regular 5 On 4.5 Wheel Kits, Which Helps Dissipate Heat And Reduces The Risk Of Overheating..
【What You Will Get】You Will Receive: 2Pcs Hub Kits (5 Bolts 4.5 For 3500Lbs), 2Pcs L44649 Outer Bearings (I.D: 1-1/16"), 2Pcs L68149 Inner Bearings (I.D: 1-3/8"), 10Pcs Lug Nuts (1/2"-20 Threads), 2Pcs Dust Caps (O.D: 1.98"), 2Pcs Grease Seals (O.D 2.56" - I.D 1.72"). Our 5*4.5 Idler Hub Kits Offer 1 Year Warranty, During This Period You Can Contact Me At Any Time And I Will Reply Within 24 Hours.（Ps.Not Include Castle Nuts And Cotter Pin）.
Brand: Saree | Manufacturer: Saree
Dimensions: 9.00 x 8.00 x 7.00 inches
Warranty: 1 year
See On Amazon #12
iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 2000 lb 5 Lug Trailer Hub Fits 1" and 1-1/16" Spindle with Extra Dust Cap and Rubber Plug
Asin: B0CM5L3YV3 | Model: QB-QC0035-1 | PartNumber: QB-QC0035-1
Features
- FIT For trailer idler hub 5 on 4.5" for 2,000 lbs trailer axle.Fits both 1" and 1-1/16" diameter straight spindles.With 1pcs 1.25" ID and 1pcs 1.5" ID grease seal.Don't worry about adaptation.
- WELL PACKING The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.
- LUXURY KIT WITH EXTRA ACCESSORIES This trailer hub kit includes 17pcs accessories units such as Idler hub, L44649 bearings, L44643 bearings, etc.It even includes 1.5 and 1.25 Grease seal, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS.
- HIGH QUALITY The hub is made of high quality carbon steel.Paint the surface to prevent rust.6.49 pounds also shows how heavy it is.
- SIZE & QUANTITY 1PCS Hub(5 bolt 4.5 for 2000lb), 2PCS L44649 bearings (I.D: 1-1/16''), 2PCS L44643 bearings (I.D: 1.25''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Grease Seal (I.D: 1.25), 1PCS Grease Seal (I.D: 1.5), 1PCS Cotter Pins(L: 2.25), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56 O.D - 1.72 I.D). Please check the image.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
【Luxury Kit With Extra Accessories】This Trailer Hub Kit Includes 17Pcs Accessories Units Such As Idler Hub, L44649 Bearings, L44643 Bearings, Etc.It Even Includes 1.5" And 1.25" Grease Seal, Cotter Pin.With Extra 1Pcs Dust Caps & 2Pcs Seals..
【Size & Quantity】1Pcs Hub(5 Bolt 4.5 For 2000Lb), 2Pcs L44649 Bearings (I.D: 1-1/16''), 2Pcs L44643 Bearings (I.D: 1.25''), 5Pcs Lug Nuts (1/2''-20 Thread), 1Pcs Grease Seal (I.D: 1.25"), 1Pcs Grease Seal (I.D: 1.5"), 1Pcs Cotter Pins(L: 2.25"), 2Pcs Dust Cap (O.D: 1.98''), 2Pcs Rubber Plug (2.56" O.D - 1.72" I.D). Please Check The Image..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【High Quality】The Hub Is Made Of High Quality Carbon Steel.Paint The Surface To Prevent Rust.6.49 Pounds Also Shows How Heavy It Is..
【Well Packing 】The Parts Are Individually Packed In Bubble Bags.Protect The Small Size With The Large Size.Packed In A Heavy Duty Box.Effectively Avoid Damage Due To Parts Colliding With Each Other In The Box..
Brand: iBroPrat | Manufacturer: iBroPrat
Warranty: 6 months
See On Amazon #13
iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 2000 lb 5 Lug Trailer Hub Fits 1" and 1-1/16" Spindle with Extra Dust Cap and Rubber Plug
Asin: B0CM5L6B4Q | Model: QB-QC0035-2 | PartNumber: QB-QC0035-2
Features
- FIT For trailer idler hub 5 on 4.5" for 2,000 lbs trailer axle.Fits both 1" and 1-1/16" diameter straight spindles.With 2pcs 1.25" ID and 2pcs 1.5" ID grease seal.Don't worry about adaptation.
- WELL PACKING The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.
- LUXURY KIT WITH EXTRA ACCESSORIES This trailer hub kit includes 2Sets,total 34pcs accessories units such as Idler hub, L44649 bearings, L44643 bearings, etc.It even includes 1.5 and 1.25 Grease seal, Cotter Pin.WITH EXTRA 2PCS DUST CAPS & 4PCS SEALS.
- HIGH QUALITY The hub is made of high quality carbon steel.Paint the surface to prevent rust.12.82 pounds also shows how heavy it is.
- SIZE & QUANTITY 2PCS Hub(5 bolt 4.5 for 2000lb), 4PCS L44649 bearings (I.D: 1-1/16''), 4PCS L44643 bearings (I.D: 1.25''), 10PCS Lug nuts (1/2''-20 thread), 2PCS Grease Seal (I.D: 1.25), 2PCS Grease Seal (I.D: 1.5), 2PCS Cotter Pins(L: 2.25), 4PCS Dust cap (O.D: 1.98''), 4PCS Rubber Plug (2.56 O.D - 1.72 I.D). Please check the image.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
【Luxury Kit With Extra Accessories】This Trailer Hub Kit Includes 2Sets,Total 34Pcs Accessories Units Such As Idler Hub, L44649 Bearings, L44643 Bearings, Etc.It Even Includes 1.5" And 1.25" Grease Seal, Cotter Pin.With Extra 2Pcs Dust Caps & 4Pcs Seals..
【Size & Quantity】2Pcs Hub(5 Bolt 4.5 For 2000Lb), 4Pcs L44649 Bearings (I.D: 1-1/16''), 4Pcs L44643 Bearings (I.D: 1.25''), 10Pcs Lug Nuts (1/2''-20 Thread), 2Pcs Grease Seal (I.D: 1.25"), 2Pcs Grease Seal (I.D: 1.5"), 2Pcs Cotter Pins(L: 2.25"), 4Pcs Dust Cap (O.D: 1.98''), 4Pcs Rubber Plug (2.56" O.D - 1.72" I.D). Please Check The Image..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【High Quality】The Hub Is Made Of High Quality Carbon Steel.Paint The Surface To Prevent Rust.12.82 Pounds Also Shows How Heavy It Is..
【Well Packing 】The Parts Are Individually Packed In Bubble Bags.Protect The Small Size With The Large Size.Packed In A Heavy Duty Box.Effectively Avoid Damage Due To Parts Colliding With Each Other In The Box..
Brand: iBroPrat | Manufacturer: iBroPrat
Warranty: 6 months
See On Amazon #14
LIBRA Set of 2 Trailer Idler Hub Kits 6 on 5.5 for 5200-6000 lbs Axle - 22019K
Asin: B01FVIVJDC | Ean: 0758399866058 | UPC: 758399866058
Features
- Set of 2 New trailer idler hub kits 6 on 5.5 for 5,200-6,000 lbs trailer axle
- Bolt pattern: 6 on 5.5, bearing races and 1/2-20 studs installed
- Kits also includ: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25 x 3.371, 2x E Z lube grease caps with rubber plug; 12 cone wheel nuts 1/2-20 thread
- See more on Amazon...
Kits Also Includ: 2X 25580 Inner Cone Bearings And 2X 15123 Outer Cone Bearings, 2X Grease Seals 2.25" X 3.371", 2X E Z Lube Grease Caps With Rubber Plug; 12 Cone Wheel Nuts 1/2"-20 Thread.
Bolt Pattern: 6 On 5.5", Bearing Races And 1/2"-20 Studs Installed.
Brand: LIBRA | Manufacturer: Libra
Weight: 28.00 Pounds
See On Amazon #15
WARN 29918 Locking Hub Spindle Nut Conversion Kit
Asin: B000CQDPPY | Model: 29918 | PartNumber: 29918
Ean: 5662252262114, 5557890004816, 7294104725669, 0789382014743, 5662252426035, 0698231200537, 0012748299189, 0851866014898
UPC: 698231200537, 012748299189, 789382014743, 851866014898
Features
- A service replacement part designed to fit with WARN external mount hub sets
- This kit will fit the following WARN Premium hub sets: 28761 and 28771
- The kit is composed of a various collection of gaskets or O-rings, screws and snap rings to aid in maintaining WARN hub sets
- Package Dimensions: 10.668 L x 8.636H x10.668W (centimeters)
- See more on Amazon...
The Kit Is Composed Of A Various Collection Of Gaskets Or O-Rings, Screws And Snap Rings To Aid In Maintaining Warn Hub Sets.
Package Dimensions: 10.668 L X 8.636H X10.668W (Centimeters).
This Kit Will Fit The Following Warn Premium Hub Sets: 28761 And 28771.
Brand: WARN | Manufacturer: Warn
Dimensions: 3.50 x 4.25 x 4.25 inches | Weight: 0.82 Pounds
See On Amazon #16
iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle
Asin: B0C46F2XFL | Model: QB-QC0028-2 | PartNumber: QB-QC0028-2
Features
- FIT For trailer idler hub 5 on 5" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle.
- WELL PACKING The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.
- LUXURY KIT WITH EXTRA ACCESSORIES This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS.
- HIGH QUALITY The hub is made of high quality carbon steel.Paint the surface to prevent rust.17.2 pounds also shows how heavy it is.
- SIZE & QUANTITY 2PCS Hubs(5 bolt 5 for 3500lb), 2PCS L44649 outer bearings (I.D: 1-1/16''), 2PCS L68149 inner bearings (I.D: 1-3/8''), 10PCS Lug nuts (1/2''-20 thread), 2PCS Washer(I.D: 1), 2PCS Spindle nuts(I.D: 1), 2PCS Cotter Pins(L: 2.25), 4PCS Dust caps (O.D: 1.98''), 4PCS Rubber Plugs (2.56 O.D - 1.72 I.D). Please check the image.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
【Luxury Kit With Extra Accessories】This Trailer Hub Kit Includes 32Pcs Accessories Units Such As Idler Hub, L44649 Outer Bearings, L68149 Inner Bearings, Etc.It Even Includes Shaft Nuts, Shaft Washers, Cotter Pin.With Extra 2 Dust Caps & 4 Seals..
【Size & Quantity】2Pcs Hubs(5 Bolt 5 For 3500Lb), 2Pcs L44649 Outer Bearings (I.D: 1-1/16''), 2Pcs L68149 Inner Bearings (I.D: 1-3/8''), 10Pcs Lug Nuts (1/2''-20 Thread), 2Pcs Washer(I.D: 1"), 2Pcs Spindle Nuts(I.D: 1"), 2Pcs Cotter Pins(L: 2.25"), 4Pcs Dust Caps (O.D: 1.98''), 4Pcs Rubber Plugs (2.56" O.D - 1.72" I.D). Please Check The Image..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【High Quality】The Hub Is Made Of High Quality Carbon Steel.Paint The Surface To Prevent Rust.17.2 Pounds Also Shows How Heavy It Is..
【Well Packing 】The Parts Are Individually Packed In Bubble Bags.Protect The Small Size With The Large Size.Packed In A Heavy Duty Box.Effectively Avoid Damage Due To Parts Colliding With Each Other In The Box..
Brand: iBroPrat | Manufacturer: iBroPrat
Warranty: 6 months
See On Amazon #17
LIBRA Set of 2 Trailer Idler Hub Kits 8 on 6.5 for 7000 lbs Axle - 22020K
Asin: B01FVJ5B5I | Ean: 0758399866065 | UPC: 758399866065
Features
- Set of 2 New trailer idler hub kits 8 on 6.5 for 7,000 lbs trailer axle
- Bolt pattern: 8 on 6.5, bearing races and 1/2-20 studs installed
- Kits also includ: 2x 25580 inner cone bearings and 2x 14125A outer cone bearings, 2x Grease seals 2.25 x 3.371, 2x E Z lube grease caps with rubber plug; 16 cone wheel nuts 1/2-20 thread
- See more on Amazon...
Kits Also Includ: 2X 25580 Inner Cone Bearings And 2X 14125A Outer Cone Bearings, 2X Grease Seals 2.25" X 3.371", 2X E Z Lube Grease Caps With Rubber Plug; 16 Cone Wheel Nuts 1/2"-20 Thread.
Bolt Pattern: 8 On 6.5", Bearing Races And 1/2"-20 Studs Installed.
Brand: LIBRA | Manufacturer: Libra
Weight: 38.00 pounds
See On Amazon #18
iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug
Asin: B0BJ8ZVVD1 | Model: QB-QC0010-2 | PartNumber: QB-QC0010-2
Features
- FIT For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle.
- WELL PACKING The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.
- LUXURY KIT WITH EXTRA ACCESSORIES This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS.
- HIGH QUALITY The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is.
- SIZE & QUANTITY 2PCS Hubs(5 bolt 4.5 for 3500lb), 2PCS L44649 outer bearings (I.D: 1-1/16''), 2PCS L68149 inner bearings (I.D: 1-3/8''), 10PCS Lug nuts (1/2''-20 thread), 2PCS Washer(I.D: 1), 2PCS Spindle nuts(I.D: 1), 2PCS Cotter Pins(L: 2.25), 4PCS Dust caps (O.D: 1.98''), 4PCS Rubber Plugs (2.56 O.D - 1.72 I.D). Please check the image.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
【Luxury Kit With Extra Accessories】This Trailer Hub Kit Includes 32Pcs Accessories Units Such As Idler Hub, L44649 Outer Bearings, L68149 Inner Bearings, Etc.It Even Includes Shaft Nuts, Shaft Washers, Cotter Pin.With Extra 2 Dust Caps & 4 Seals..
【Size & Quantity】2Pcs Hubs(5 Bolt 4.5 For 3500Lb), 2Pcs L44649 Outer Bearings (I.D: 1-1/16''), 2Pcs L68149 Inner Bearings (I.D: 1-3/8''), 10Pcs Lug Nuts (1/2''-20 Thread), 2Pcs Washer(I.D: 1"), 2Pcs Spindle Nuts(I.D: 1"), 2Pcs Cotter Pins(L: 2.25"), 4Pcs Dust Caps (O.D: 1.98''), 4Pcs Rubber Plugs (2.56" O.D - 1.72" I.D). Please Check The Image..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【High Quality】The Hub Is Made Of High Quality Carbon Steel.Paint The Surface To Prevent Rust.8.6 Pounds Also Shows How Heavy It Is..
【Well Packing 】The Parts Are Individually Packed In Bubble Bags.Protect The Small Size With The Large Size.Packed In A Heavy Duty Box.Effectively Avoid Damage Due To Parts Colliding With Each Other In The Box..
Brand: iBroPrat | Manufacturer: iBroPrat
Warranty: 6 months
See On Amazon #19
GREPSPUD 2 Sets 4 on 4'' Trailer Hub Kit for 2000 lbs 1" or 1-1/16" Trailer Straight Axle, 4x4'' Trailer Idler Hub Kit 4 Bolt, Fits 1" and 1-1/16" Spindle, Trailer Hub Kit with Extra Cap & Rubber Plug
Asin: B0CCD9C31K | Model: LSQC00212 | PartNumber: LSQC00212
Features
- FIT - If you are not sure about the size of your original parts, you can choose this kit. This 4x4'' trailer hub kit fits 2000lbs 1" or 1-1/16" diameter trailer straight spindles. With 4Pcs L44643 bearings (for 1'' axle), 4Pcs L44649 bearings (for 1-1/16'' axle), 2Pcs 1.25'' I.D and 2Pcs 1.5'' I.D grease seals. Don't worry about adaptation.
- SIZE & QUANTITY - The trailer hub assembly kit include 32Pcs parts: 2Pcs Hubs (4 bolt 4'' for 2000lbs), 4Pcs L44643 Bearings (I.D: 1''), 4Pcs L44649 Bearings (I.D: 1-1/16''), 8Pcs Lug Nuts (1/2''-20 thread), 2Pcs Grease Seals (I.D: 1.25, O.D: 1.98''), 2Pcs Grease Seals (I.D: 1.5, O.D: 1.98''), 2Pcs Cotter Pins (Length: 2.3), 4Pcs Dust Caps (O.D: 1.98''), 4Pcs Rubber Plugs. Value-for-money sets! Meet the need for various repairs and spare parts.
- STRONG PACKAGING - The trailer hub is wrapped with a bubble bag. Other parts are individually packed in white bubble bags. All parts are placed neatly, protect the small size with the large size. All items are neatly placed in a sturdy cardboard box. They are protected as much as possible during transportation to prevent deformation and wear.
- HEAVY DUTY & ANTI-RUST - These items are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust, long-term service for your trailer.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can contact us for replacement or full refund. Please rest assured purchase. NOTE - In order to install firmly, the axle dust caps and grease seals are slightly larger by design. You need to knock it into place using a wood block and hammer or rubber mallet.
- See more on Amazon...
【Strong Packaging】- The Trailer Hub Is Wrapped With A Bubble Bag. Other Parts Are Individually Packed In White Bubble Bags. All Parts Are Placed Neatly, Protect The Small Size With The Large Size. All Items Are Neatly Placed In A Sturdy Cardboard Box. They Are Protected As Much As Possible During Transportation To Prevent Deformation And Wear..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Contact Us For Replacement Or Full Refund. Please Rest Assured Purchase. 【Note】- In Order To Install Firmly, The Axle Dust Caps And Grease Seals Are Slightly Larger By Design. You Need To Knock It Into Place Using A Wood Block And Hammer Or Rubber Mallet..
【Heavy Duty & Anti-Rust】- These Items Are Made Of High Quality Steel And Rubber, Strong And Durable. Wheel Hub Surface With Black Coating, And Dust Cap Surface Zinc-Plated, Anti-Corrosion & Anti-Rust, Long-Term Service For Your Trailer..
【Size & Quantity】- The Trailer Hub Assembly Kit Include 32Pcs Parts: 2Pcs Hubs (4 Bolt 4'' For 2000Lbs), 4Pcs L44643 Bearings (I.D: 1''), 4Pcs L44649 Bearings (I.D: 1-1/16''), 8Pcs Lug Nuts (1/2''-20 Thread), 2Pcs Grease Seals (I.D: 1.25", O.D: 1.98''), 2Pcs Grease Seals (I.D: 1.5", O.D: 1.98''), 2Pcs Cotter Pins (Length: 2.3"), 4Pcs Dust Caps (O.D: 1.98''), 4Pcs Rubber Plugs. Value-For-Money Sets! Meet The Need For Various Repairs And Spare Parts..
Brand: GREPSPUD | Manufacturer: GREPSPUD
Warranty: Manufacturer warranty for 12 months from date of purchase.
See On Amazon #20
iBroPrat 2 Sets Trailer Hub Kit 4 Bolt 4, Trailer Axle Kit for 2000 lb 4 Lug Trailer Hub Fits 1" and 1-1/16" Spindle with Extra Dust Cap and Rubber Plug
Asin: B0CCTDJ2ZH | Model: QB-QC0021-2 | PartNumber: QB-QC0021-2
Features
- FIT For trailer idler hub 4 on 4" for 2,000 lbs trailer axle.Fits both 1" and 1-1/16" diameter straight spindles.With 2pcs 1.25" ID and 2pcs 1.5" ID grease seal.Don't worry about adaptation.
- WELL PACKING The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.
- LUXURY KIT WITH EXTRA ACCESSORIES This trailer hub kit includes 2Sets,total 32pcs accessories units such as Idler hub, L44649 bearings, L44643 bearings, etc.It even includes 1.5 and 1.25 Grease seal, Cotter Pin.WITH EXTRA 2PCS DUST CAPS & 4PCS SEALS.
- HIGH QUALITY The hub is made of high quality carbon steel.Paint the surface to prevent rust.12.82 pounds also shows how heavy it is.
- SIZE & QUANTITY 2PCS Hub(4 bolt 4 for 2000lb), 4PCS L44649 bearings (I.D: 1-1/16''), 4PCS L44643 bearings (I.D: 1.25''), 8PCS Lug nuts (1/2''-20 thread), 2PCS Grease Seal (I.D: 1.25), 2PCS Grease Seal (I.D: 1.5), 2PCS Cotter Pins(L: 2.25), 4PCS Dust cap (O.D: 1.98''), 4PCS Rubber Plug (2.56 O.D - 1.72 I.D). Please check the image.
- SATISFACTION GUARANTEE - For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
【Luxury Kit With Extra Accessories】This Trailer Hub Kit Includes 2Sets,Total 32Pcs Accessories Units Such As Idler Hub, L44649 Bearings, L44643 Bearings, Etc.It Even Includes 1.5" And 1.25" Grease Seal, Cotter Pin.With Extra 2Pcs Dust Caps & 4Pcs Seals..
【Size & Quantity】2Pcs Hub(4 Bolt 4 For 2000Lb), 4Pcs L44649 Bearings (I.D: 1-1/16''), 4Pcs L44643 Bearings (I.D: 1.25''), 8Pcs Lug Nuts (1/2''-20 Thread), 2Pcs Grease Seal (I.D: 1.25"), 2Pcs Grease Seal (I.D: 1.5"), 2Pcs Cotter Pins(L: 2.25"), 4Pcs Dust Cap (O.D: 1.98''), 4Pcs Rubber Plug (2.56" O.D - 1.72" I.D). Please Check The Image..
【Satisfaction Guarantee】- For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【High Quality】The Hub Is Made Of High Quality Carbon Steel.Paint The Surface To Prevent Rust.12.82 Pounds Also Shows How Heavy It Is..
【Well Packing 】The Parts Are Individually Packed In Bubble Bags.Protect The Small Size With The Large Size.Packed In A Heavy Duty Box.Effectively Avoid Damage Due To Parts Colliding With Each Other In The Box..
Brand: iBroPrat | Manufacturer: iBroPrat
Warranty: 6 months
See On Amazon #21
LIBRA Trailer Idler Hub Kit 8 Lugs 8 on 6.5 8x6.5 for 7000 lbs Axle - 22020
Asin: B0BN6SH6LH
Features
- One new LIBRA trailer idler hub kit 8 on 6.5 for 7,000 lbs trailer axle
- Bolt pattern: 8 on 6.5, bearing races and 1/2-20 studs installed
- Kit also includ: 1x 25580 inner cone bearing and 1x 14125A outer cone bearing, 1x Grease seal 2.25 x 3.371, 1x E Z lube grease cap with rubber plug; 8 cone wheel nuts 1/2-20 thread
- Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 16 years.
- See more on Amazon...
Kit Also Includ: 1X 25580 Inner Cone Bearing And 1X 14125A Outer Cone Bearing, 1X Grease Seal 2.25" X 3.371", 1X E Z Lube Grease Cap With Rubber Plug; 8 Cone Wheel Nuts 1/2"-20 Thread.
Libra Trailer Parts Has Been Supplying Us Trailer Manufacturers Oem Parts 16 Years..
Bolt Pattern: 8 On 6.5", Bearing Races And 1/2"-20 Studs Installed.
Brand: LIBRA | Manufacturer: LIBRA
See On Amazon #22
1 Set Trailer Hub Kit 5 Bolt 4.5 for 3500 lb Trailer Axle Bearing Kit Boat Trailer Hub 5 Lug with Extra Trailer Dust Caps and Rubber Plugs for #84 Spindle 1-1/16'' to 1-3/8" Trailer Axles
Asin: B0C9QLF4N6 | Model: Trailer Hub Kit 5 Bolt 4.5 | PartNumber: Trailer Hub Kit 5 Bolt 4.5
Features
- Fit for 1-1/16'' to 1-3/8'' trailer axle 3500lb #84 spindles.
- Tools to extend the life of your trailer, replace worn bearings to prolong the life of your boat trailer and accessories.
- Quality Materials: These trailer parts are made of high quality steel and rubber, strong and durable. The wheel hub is made of high quality carbon steel with black coating, and the dust cover is galvanized on the surface, to prevent corrosion and rust, serving your trailer for a long time.
- Value Kit: 1 SET of trailer hub kit, TOTAL 16 PCS parts, including 1 x Hub (5 bolt 4.5 for 3500lb), 1 x inner bearing (L68149), 1 x outer bearing (L44649), 1 x grease seal (I.D: 1.719'', O.D: 2.565''), 5 x Lug nuts (1/2''-20 thread), 2 x dust caps (O.D: 1.98''), 2 x rubber plugs, 1 x spindle nut, 1 x washer, 1 x cotter pin. *Detailed dimensions can be seen in the picture or in the descriptions below.*
- Note: The axle dust cover is designed to be slightly larger in order to install firmly. You need to knock it into place with a hammer or rubber mallet to prevent denting the cover during installation.
- See more on Amazon...
Quality Materials: These Trailer Parts Are Made Of High Quality Steel And Rubber, Strong And Durable. The Wheel Hub Is Made Of High Quality Carbon Steel With Black Coating, And The Dust Cover Is Galvanized On The Surface, To Prevent Corrosion And Rust, Serving Your Trailer For A Long Time..
Note: The Axle Dust Cover Is Designed To Be Slightly Larger In Order To Install Firmly. You Need To Knock It Into Place With A Hammer Or Rubber Mallet To Prevent Denting The Cover During Installation..
Value Kit: 1 Set Of Trailer Hub Kit, Total 16 Pcs Parts, Including 1 X Hub (5 Bolt 4.5 For 3500Lb), 1 X Inner Bearing (L68149), 1 X Outer Bearing (L44649), 1 X Grease Seal (I.D: 1.719'', O.D: 2.565''), 5 X Lug Nuts (1/2''-20 Thread), 2 X Dust Caps (O.D: 1.98''), 2 X Rubber Plugs, 1 X Spindle Nut, 1 X Washer, 1 X Cotter Pin. *Detailed Dimensions Can Be Seen In The Picture Or In The Descriptions Below.*.
Tools To Extend The Life Of Your Trailer, Replace Worn Bearings To Prolong The Life Of Your Boat Trailer And Accessories..
Brand: TiciKim | Manufacturer: TiciKim
Warranty: 30DAYS
See On Amazon #23
JADODE Trailer Hub Kit 5 Bolt 4.5 for 3500 lbs Heavy Duty Trailer Axle 1-1/16'' with 1/2"-20 Thread #84 Spindle 5 Lug Trailer Hub Trailer Idler Hub Kit
Asin: B0C2BQQQJ8 | Model: T-5X45H | PartNumber: T-5X45H | Ean: 0665878223021 | UPC: 665878223021
Features
- Trailer hub kits 5 on 4.5" for 3500 lbs trailer axle fits 1-1/16'' to 1-3/8" fits #84 spindle
- 4 x bearing races installed - 2x L68149 / L68111 inner bearings 1-3/8'' I.D 2x L44649 / L44610 outer bearings 1-1/16''I.D 2 x dust cap 198''O.D 2 x Grease seals 1.719x 2.565 trailer axle hub bearing kits
- Trailer hub kit 5 bolt 4.5 pattern with 10 x 1/2-20 thread studs nuts installed replacement hub 5-Hole trailer wheel
- JADODE trailer hub assembly make of durable chrome steel plus double lips and wheel hub with coating design ensure better sealing and anti-rust. Notes: all this Idler fit straight spindles, not for tapered spindles
- The trailer idler hub kits pre-greased trailer parts & accessories offers 1year warranty.Streamlined design for easy of use is our philosophy,with guaranteed after-sales service,feel free to buy
- See more on Amazon...
Trailer Hub Kit 5 Bolt 4.5 Pattern With 10 X 1/2"-20 Thread Studs Nuts Installed Replacement Hub 5-Hole Trailer Wheel.
The Trailer Idler Hub Kits Pre-Greased Trailer Parts & Accessories Offers 1Year Warranty.Streamlined Design For Easy Of Use Is Our Philosophy,With Guaranteed After-Sales Service,Feel Free To Buy.
Jadode Trailer Hub Assembly Make Of Durable Chrome Steel Plus Double Lips And Wheel Hub With Coating Design Ensure Better Sealing And Anti-Rust. Notes: All This Idler Fit Straight Spindles, Not For Tapered Spindles.
4 X Bearing Races Installed - 2X L68149 / L68111 Inner Bearings 1-3/8'' I.D，2X L44649 / L44610 Outer Bearings 1-1/16''I.D；2 X Dust Cap 198''O.D；2 X Grease Seals 1.719"X 2.565" Trailer Axle Hub Bearing Kits.
Brand: JADODE | Manufacturer: JA AUTO
See On Amazon #24
JADODE Trailer Hub Kit 4 on 4'' for 2000 lbs 1'' and 1-1/16'' Axle Heavy Duty Trailer Wheel Hub with L44643 Bearings 1/2"-20 Thread Trailer Idler Hub Kits Set of 2
Asin: B0CCDRJRVB | Model: T-4X40H | PartNumber: T-4X40H | Ean: 0665878223335 | UPC: 665878223335
Features
- Set of 2 trailer idler hub kits 4 on 4" for 2000 lbs axle hub
- 4 x bearing races installed - 2x L68149 Bearings (I.D: 1-1/16'') 2x L44643 Bearings (I.D: 1'') 2 x dust cap 198''O.D 2 x Grease seals 1.25x 1.98'' trailer axle hub bearing kits
- Trailer hub kits 4 on 4 bolt pattern with 8 x 1/2-20 thread studs nuts installed and 1 x Cotter Pin (Length: 2.3)
- JADODE trailer wheel hub assembly kit make of durable chrome steel plus double lips and wheel hub with coating design ensure better sealing and anti-rust. Notes: all this Idler fit straight spindles, not for tapered spindles
- JADODE trailer hub drum kits Making it an Ideal Choice for Travelers Seeking a Hassle-Free Power Solution
- See more on Amazon...
Trailer Hub Kits 4 On 4" Bolt Pattern With 8 X 1/2"-20 Thread Studs Nuts Installed And 1 X Cotter Pin (Length: 2.3").
Jadode Trailer Hub Drum Kits Making It An Ideal Choice For Travelers Seeking A Hassle-Free Power Solution.
Jadode Trailer Wheel Hub Assembly Kit Make Of Durable Chrome Steel Plus Double Lips And Wheel Hub With Coating Design Ensure Better Sealing And Anti-Rust. Notes: All This Idler Fit Straight Spindles, Not For Tapered Spindles.
4 X Bearing Races Installed - 2X L68149 Bearings (I.D: 1-1/16'')，2X L44643 Bearings (I.D: 1'')；2 X Dust Cap 198''O.D；2 X Grease Seals 1.25"X 1.98'' Trailer Axle Hub Bearing Kits.
Brand: JADODE | Manufacturer: JA AUTO
See On Amazon #25
JDMSPEED Trailer Idler Hub Kits 5 on 4.5" for 3500 lbs Axle 1/2"-20 Thread 22017K Set of 2
Asin: B07L9WKW3N | Model: 22017K | PartNumber: 22017K | Ean: 0711766843694 | UPC: 711766843694
Features
- Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle
- Kits also include: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719 x 2.565, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2-20 thread
- Bolt pattern: 5 on 4.5, bearing races and 1/2-20 studs installed
- Fits most 3500lb axles, specifically trailer and boat axle manufacturers
- Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649)
- See more on Amazon...
Bolt Pattern: 5 On 4.5", Bearing Races And 1/2"-20 Studs Installed.
Built For 84 Spindles With A 4 Hole Brake Flange (Inner Bearing L68149, Outer Bearing L44649).
Fits Most 3500Lb Axles, Specifically Trailer And Boat Axle Manufacturers.
Kits Also Include: 2X L68149 Inner Cone Bearings And 2X L44649 Outer Cone Bearings, 2X Grease Seals 1.719" X 2.565", 2X E Z Lube Grease Caps With Rubber Plug; 10 Cone Wheel Nuts 1/2"-20 Thread.
Brand: JDMSPEED | Manufacturer: JDMSPEED
Weight: 14.55 Pounds
See On Amazon #26
WARN 20825 Locking Hub Service Kit with Snap Rings, Gaskets, Retaining Bolts and O-Rings
Asin: B000BQMZP6 | Model: 20825 | PartNumber: 20825 | Ean: 0012748208259 | UPC: 012748208259
Features
- A service replacement part to keep your hubs fresh
- Internal mount hub service kit
- For use with WARN hub set 20990
- Number Of Splines: 19
- WARN service kits provide the correct parts for maintaining their locking hubs and getting your vehicle back on the trails
- See more on Amazon...
For Use With Warn Hub Set 20990.
Warn Service Kits Provide The Correct Parts For Maintaining Their Locking Hubs And Getting Your Vehicle Back On The Trails.
Number Of Splines: 19.
Internal Mount Hub Service Kit.
First Available: 10/12/2005
Brand: WARN | Manufacturer: Warn
Dimensions: 0.50 x 10.75 x 7.00 inches | Weight: 0.10 pounds
Warranty: Warranty
See On Amazon #27
Alloy USA Axle Locking Hub Kit for Jeep CJ/Scrambler | Manual, Pair | 15001.26 | Fits 1981-1986 Jeep CJ7/Scrambler
Asin: B001FAGL16 | Model: 15001.26 | PartNumber: 15001.26 | Ean: 0804314123239 | UPC: 804314123239
Features
- FITMENT | Fits 1981-1986 Jeep CJ7/Scrambler
- Impact resistant nodular iron
- Corrosion resistant
- Better 4WD performance
- Better fuel economy
- Limited 5 Year Warranty
- See more on Amazon...
Corrosion Resistant.
Better Fuel Economy.
Limited 5 Year Warranty.
Better 4Wd Performance.
Impact Resistant Nodular Iron.
Brand: Alloy USA | Manufacturer: Rugged Ridge
Dimensions: 3.50 x 9.50 x 4.50 inches | Weight: 3.00 Pounds
Warranty: 3 Year warranty against manufacturing defects
See On Amazon #28
Trailer Brake Idler Hub Kit, 5-Hole, 4.5" Bolt Circle Brake Idler Hub for 3500lb Trailer 1-1/16'' to 1-3/8'' Axles with Extra Dust Caps & Rubber Plugs, Replacement Brake Hub Drum Assembly(Set-2)
Asin: B0BVBC1Q9J
Features
- Premium Material: This brake Idler Hub is made of high-quality iron and uses electroplating technology to protect the Idler Hub body, enabling it to work normally in various environments. At the same time, the brake Idler Hub is resistant to rust and corrosion, greatly extending the service life of the product.
- About The Idler Hub: Classic design and rich production experience make the brake Idler Hub more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It s designed for 3500lb Axles.
- Package Including: 2*brake Idler Hub 5*4.5; 2*bearing inner ring replace for L68149; 2*bearing inner ring replace for L44649; 2*oil seal; 2*dust cover; 10*hub nut.
- Suit for: Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer.
- After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.
- See more on Amazon...
Package Including: 2*Brake Idler Hub 5*4.5"; 2*Bearing Inner Ring Replace For L68149; 2*Bearing Inner Ring Replace For L44649; 2*Oil Seal; 2*Dust Cover; 10*Hub Nut..
After Sale Service: High Quality Assurance! And We Provide After-Sales Service Policy. If You Have Any Problems, Please Contact Us First, We Will Try Our Best To Solve Your Problem..
Suit For: Fits 1-1/16'' To 1-3/8'' Spindles 3,500 Pounds Trailer..
About The Idler Hub: Classic Design And Rich Production Experience Make The Brake Idler Hub More Excellent Response, In A Variety Of Harsh Environments Can Achieve A Short Period Of Emergency Braking, So That Your Journey Is Safer. It’S Designed For 3500Lb Axles..
Brand: SEHNSUCHT | Manufacturer: SEHNSUCHT
See On Amazon #29
WARN 11714 Locking Hub Service Kit with Snap Rings, Gaskets, Retaining Bolts and O-Rings for Dodge, GM & Ford
Asin: B000CQBK9W | Model: 11714 | PartNumber: 11714 | Ean: 0012748117148 | UPC: 012748117148
Features
- Expertly designed to fit with WARN flange mount hub sets
- This kit will fit the following WARN premium hub set: 38826 and WARN standard hub set: 11690
- A service kit is composed of a various collection of O-rings to aid in maintaining WARN hub sets
- Essential for maintenance and repairs of certain WARN models
- See more on Amazon...
A Service Kit Is Composed Of A Various Collection Of O-Rings To Aid In Maintaining Warn Hub Sets.
Essential For Maintenance And Repairs Of Certain Warn Models.
This Kit Will Fit The Following Warn Premium Hub Set: 38826 And Warn Standard Hub Set: 11690.
Brand: WARN | Manufacturer: Warn
Dimensions: 0.50 x 10.75 x 7.00 inches | Weight: 0.26 Pounds
Warranty: Warranty
See On Amazon #30
VIRTIONZ Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle (1Set Trailer Hub Kit 4 Bolt 4 for 2000LBS)
Asin: B0CB1NQHTQ | Model: Trailer axle variation | PartNumber: Trailer axle variation | Ean: 0659629126891 | UPC: 659629126891
Brand: VIRTIONZ | Manufacturer: VIRTIONZ
See On Amazon
Looking For Something Else?
Search