Best Automotive Performance Push Rods - Buying Guide
Last Updated: 05/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Michigan Motorsports 7.400" Chromoly LS Pushrods 5/16" Diameter 4.8 5.3 6.0 LS1 LS2 LS3 LS6
Asin: B083C216MH | Model: K8100 | PartNumber: K8100
Features
- 16 Michigan Motorsports LS1 Chromoly Pushrods
- Perfect for any Cam or Rocker upgrades - easy to install
- Fits Most LS engines (except LS7) including 4.8 5.3 6.0 6.2 LS1 LS6 LS2 LS3 L92 L99
- These are the stock length 7.400 Long 5/16 Chromoly .080 Wall pushrods .080 Wall pushrods
- These are highly recommended when upgrading Camshafts. These one piece precision formed pushrods are constructed from SAE 4130 chromoly tubing, centerless ground to exacting tolerances, and case hardened to RC 60. Beware of competitors who say their pushrods are made from the same 4130 material, because some are not.
- See more on Amazon...
Fits Most Ls Engines (Except Ls7) Including 4.8 5.3 6.0 6.2 Ls1 Ls6 Ls2 Ls3 L92 L99.
These Are Highly Recommended When Upgrading Camshafts. These One Piece Precision Formed Pushrods Are Constructed From Sae 4130 Chromoly Tubing, Centerless Ground To Exacting Tolerances, And Case Hardened To Rc 60. Beware Of Competitors Who Say Their Pushrods Are Made From The Same 4130 Material, Because Some Are Not..
These Are The Stock Length 7.400" Long 5/16" Chromoly .080 Wall Pushrods .080 Wall Pushrods.
Perfect For Any Cam Or Rocker Upgrades - Easy To Install.
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon #2
7.400" Pushrod Set LS Pushrods 5/16 Diameter Chromoly Push Rods for 1999-2013 Silverado Sierra LS1 LS2 LS3 LS6 LS7 LS9 LSX Engines 4.8L 5.3L 6.0L
Asin: B0BCW8M163 | Model: pushrod 7.4 | PartNumber: pushrod 7.4
Features
- Chromoly pushrods: overall length of 7.400", overall diameter of 5/16", wall thickness .080", set of 16
- LS pushrods fit for 1999-2002 Camaro & Firebird, for 2010-2013 Camaro, for 1999-2013 Corvette, for 2004-2006 Pontiac GTO, for 2004-2007 Cadillac CTS-V
- Push rod fit for 2008-2009 Pontiac G8, for 2000-2013 Tahoe, Yukon, Escalade, for 2003-2009 H2 Hummer, for 2001-2013 Chevrolet Avlanche, for 1999-2013 Silverado & Sierra (4.8L, 5.3L, 6.0L)
- 7.4 pushrods set, fits ls1, ls2, ls3, ls6, ls7, ls9 lsx engines
- See more on Amazon...
Push Rod Fit For 2008-2009 Pontiac G8, For 2000-2013 Tahoe, Yukon, Escalade, For 2003-2009 H2 Hummer, For 2001-2013 Chevrolet Avlanche, For 1999-2013 Silverado & Sierra (4.8L, 5.3L, 6.0L).
7.4 Pushrods Set, Fits Ls1, Ls2, Ls3, Ls6, Ls7, Ls9 Lsx Engines.
Ls Pushrods Fit For 1999-2002 Camaro & Firebird, For 2010-2013 Camaro, For 1999-2013 Corvette, For 2004-2006 Pontiac Gto, For 2004-2007 Cadillac Cts-V.
Brand: SUSUCAR | Manufacturer: SUSUCAR
Warranty: 1 year
See On Amazon #3
Comp Cams 7854-16 High Energy 8.280" and 9.252" Long, 3/8" Diameter Pushrod Set
Asin: B000CIUE5Q | Model: 7854-16 | PartNumber: 7854-16 | Ean: 0036584400523 | UPC: 036584400523
Features
- Fits 1965-1986 Big Block Chevy 396-454
- Includes Qty 8 of 8.280 inch long intake pushrods
- Includes Qty 8 of 9.252 inch long exhaust pushrods
- 3/8 Inch Diameter
- 5/16 inch oil through welded ball ends
- Fit type: Vehicle Specific
- See more on Amazon...
Includes Qty 8 Of 9.252 Inch Long Exhaust Pushrods.
5/16 Inch Oil Through Welded Ball Ends.
Fit Type: Vehicle Specific.
3/8 Inch Diameter.
Includes Qty 8 Of 8.280 Inch Long Intake Pushrods.
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.70 x 12.20 x 4.20 inches | Weight: 2.56 pounds
Warranty: 1 year
See On Amazon #4
Elgin Industries 5/16" Push Rods Set of 16 compatible with Ford 390 360 352 427 428 330 332 361 389 FE Series. Ball to Ball Ends
Asin: B01N9CHFZ2 | Ean: 0013122104747 | UPC: 013122104747
Features
- These are Ball to ball type ends. Not Ball to Cup
- compatible replacements for 390 360 352 427 428 330 332 361 389 FE Series
- 5/16 Diameter push rods and 9.59 Overall length.
- See more on Amazon...
5/16" Diameter Push Rods And 9.59" Overall Length..
Compatible Replacements For 390 360 352 427 428 330 332 361 389 Fe Series.
Brand: Elgin Industries | Manufacturer: Elgin Industries
Dimensions: 4.00 x 8.00 x 6.00 inches | Weight: 1.00 pounds
Warranty: Replacement before installation
See On Amazon #5
Brian Tooley LS1 Chromoly Pushrods 5/16 Diameter 4.8 5.3 6.0 LS6 LS2 LS3 7.4 BTR
Asin: B074L8VMNX | Model: 72400 | PartNumber: 72400
Features
- 16 Brian Tooley Racing LS1 CHROMOLY PUSHRODS
- Perfect for any Cam or Rocker upgrades - easy to install
- Fits Most LS engines (except LS7) including 4.8 5.3 6.0 6.2 LS1 LS6 LS2 LS3 L92 L99
- These are the stock length 7.400 Long 5/16 Chromoly .080 Wall pushrods
- See more on Amazon...
Fits Most Ls Engines (Except Ls7) Including 4.8 5.3 6.0 6.2 Ls1 Ls6 Ls2 Ls3 L92 L99.
These Are The Stock Length 7.400" Long 5/16" Chromoly .080 Wall Pushrods.
Perfect For Any Cam Or Rocker Upgrades - Easy To Install.
Brand: BTR | Manufacturer: BTR Brian Tooley Racing
Dimensions: 1.00 x 8.00 x 4.00 Inches
Warranty: 30 Days from Purchase Date
See On Amazon #6
Full Set Universal Manual Master Cylinder Push Rod Kit Compatible with Ford 1964-1973 Replace GM Cylinder Push Rod Set Professional 7in Shortest Length 5/8 Eyelet
Asin: B0BRRYLW44 | Model: for 1964-1973 | PartNumber: for 1964-1973 | Ean: 0647349393105 | UPC: 647349393105
Features
- Fitment: Fit for Ford 1964-1973.
- Come with 5/8 eyelet, maximum length is 7.5in, shortest length is 7in, adjustable and flexible. Threaded rot can be cut to length to 5 1/8in for shortest length, more practical to use.
- We have been tested many times before sales to ensure the safety, stability and durability.
- Note: This item is a replacement part. Please make sure the images are the same with what you want. If not, please do not purchase it even your model is in the described list!
- Every product has quality inspection before leaving the factory.Customer satisfaction is our tireless pursuit.We will show you a sincere attitude and satisfactory solution.
- See more on Amazon...
We Have Been Tested Many Times Before Sales To Ensure The Safety, Stability And Durability..
Every Product Has Quality Inspection Before Leaving The Factory.Customer Satisfaction Is Our Tireless Pursuit.We Will Show You A Sincere Attitude And Satisfactory Solution..
Note: This Item Is A Replacement Part. Please Make Sure The Images Are The Same With What You Want. If Not, Please Do Not Purchase It Even Your Model Is In The Described List!.
Come With 5/8 Eyelet, Maximum Length Is 7.5In, Shortest Length Is 7In, Adjustable And Flexible. Threaded Rot Can Be Cut To Length To 5 1/8In For Shortest Length, More Practical To Use..
Brand: Mogankey | Manufacturer: Mogankey
Warranty: 3 Month
See On Amazon #7
TAKPART Hardened Steel Pushrods 5/16" Fits for SBC 327 350 383 400 7.800" Length
Asin: B08X3H2SCP
Features
- 7.800" Length, measured by hand.
- 5/16 diameter small block hardened push rods
- For '55-'94 262, 283, 302, 305, 307, 327, 350, and 400 non roller cam engines.
- Fits for Chevy SBC 327 350 383 400
- Set of 16 pcs
- See more on Amazon...
For '55-'94 262, 283, 302, 305, 307, 327, 350, And 400 Non Roller Cam Engines..
Set Of 16 Pcs.
Fits For Chevy Sbc 327 350 383 400.
5/16" Diameter Small Block Hardened Push Rods.
Brand: TAKPART | Manufacturer: TAKPART
See On Amazon #8
Michigan Motorsports 7.400 Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
Asin: B07HZ7HNMD
Features
- LS 7.400" Pushrods
- Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
- Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines.
- These are the stock length 7.400 Long 5/16 pushrods
- Pushrod specifications are as follows: OVERALL LENGTH: 7.400 TUBE SIZE: 5/16 x .075 (stock) MATERIAL: 1010 ENDS: 5/16 ball (drilled)
- See more on Amazon...
Set Of Sixteen (16) Stock Replacement Pushrods For 1997-2012 Gm Ls-Series Gen Iii And Iv Small Block V-8 Engines..
Pushrod Specifications Are As Follows: Overall Length: 7.400" Tube Size: 5/16" X .075" (Stock) Material: 1010 Ends: 5/16" Ball (Drilled).
These Are The Stock Length 7.400" Long 5/16" Pushrods.
Fits 4.8 5.3 5.7 6.0 Ls1 Ls2 Ls3 Ls6 L99 Ls4 Ls9 Lsa Lq4 Lq9 L76 L92.
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.00 Pounds
See On Amazon #9
Acouto for SBC Push Rods, 16pcs Hardened Steel Pushrods Set 5/16in Diameter 7.8in Standard Length Fit for Chevy OEM Replacement Pushrod Set
Asin: B08FDLWS2F
Features
- Fitment---- Valve Push Rods are suitable for '55-'94 262, 283, 302, 305, 307, 327, 350 and 400 non roller cam engines. brand new, please be assured of your purchase
- Size---- 5/16in diameter with welded (not pressed) ball ends, 7.800in standrad length. Please confirm whether the product is suitable before purchasing
- High Quality Steel---- The push rods are made of high-quality steel material, which are wear-resistant and durable, not easy to break. The manufacture of the push rod meets the strict quality requirements
- High Strength---- Heat treated for added strength, guideplate compatible. Durable one-piece construction, which has long service life, high precision and good reliability
- Good Replacement---- Mate perfectly with high energyand magnum rockers. Ideal and direct replacement for old or damaged valve push rod, dependable to use
- See more on Amazon...
High Quality Steel---- The Push Rods Are Made Of High-Quality Steel Material, Which Are Wear-Resistant And Durable, Not Easy To Break. The Manufacture Of The Push Rod Meets The Strict Quality Requirements.
Good Replacement---- Mate Perfectly With High Energyand Magnum Rockers. Ideal And Direct Replacement For Old Or Damaged Valve Push Rod, Dependable To Use.
High Strength---- Heat Treated For Added Strength, Guideplate Compatible. Durable One-Piece Construction, Which Has Long Service Life, High Precision And Good Reliability.
Size---- 5/16In Diameter With Welded (Not Pressed) Ball Ends, 7.800In Standrad Length. Please Confirm Whether The Product Is Suitable Before Purchasing.
Brand: Acouto | Manufacturer: Acouto
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.63 Pounds
See On Amazon #10
Push Rod Tubes, Threaded Adjustable, 8 Pieces, Compatible with Dune Buggy
Asin: B003LIZ9FE | Model: 00-9149-0 | PartNumber: 00-9149-0 | Ean: 6912208464192, 0707924336276 | UPC: 707924336276
Features
- Aluminum Material, "Adjustable" / Does Not Includes Seals
- Threaded Adjustable Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car
- Ideal For Emergency Repairs Or Permanent Installation
- 1600cc Base Engines
- Sold As Set Of 8
- See more on Amazon...
Ideal For Emergency Repairs Or Permanent Installation.
Sold As Set Of 8.
1600Cc Base Engines.
Threaded Adjustable Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car.
Brand: Empi | Manufacturer: Empi
Dimensions: 5.00 x 5.00 x 5.00 inches | Weight: 1.00 Pounds
See On Amazon #11
Elgin Industries USA 7.800" Std Length HP Hardened Pushrod Set of 16 compatible with Chevy sb 400 383 350 327 305 283
Asin: B00EZ7JJJC | Model: PR-537S | PartNumber: PR-537S | Ean: 0013122108660 | UPC: 013122108660
Features
- Replacement for many small blocks Chevy. See description for applications.
- 5/16 diameter hardened push rods in 7.800 stock length. Material: Hardened 1010 Steel
- Made in the USA by Elgin Industries. Guide plate compatible
- See more on Amazon...
Made In The Usa By Elgin Industries. Guide Plate Compatible.
5/16" Diameter Hardened Push Rods In 7.800" Stock Length. Material: Hardened 1010 Steel.
Brand: Elgin | Manufacturer: Elgin Industries
Dimensions: 1.00 x 10.00 x 2.00 Inches | Weight: 2.00 Pounds
Warranty: Replacement before installation
See On Amazon #12
WFLNHB Manual Master Cylinder Push Rod Kit Replacement for Ford 1964-1973
Asin: B0B45S3KRW | Model: FORD-MC-ROD-KIT | PartNumber: FORD-MC-ROD-KIT
Features
- Part Number: 172485303770
- Replacement for Ford 1964-1973
- Adjustable Master Cylinder Push rod Kit
- Threaded rot can be cut to length to 5 1/8in for shortest length
- The master cylinder push rod kit is easy to use without modification. It is very useful and convenient
- See more on Amazon...
Adjustable Master Cylinder Push Rod Kit.
The Master Cylinder Push Rod Kit Is Easy To Use Without Modification. It Is Very Useful And Convenient.
Threaded Rot Can Be Cut To Length To 5 1/8In For Shortest Length.
Replacement For Ford 1964-1973.
Brand: WFLNHB | Manufacturer: WFLNHB
Dimensions: 1.18 x 4.92 x 1.97 inches
See On Amazon #13
16 Pcs 7.4" Pushrods Set 5/16" Diameter Fits for LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92 Chevy Avlanche Silverado Tahoe
Asin: B0CQY6DJN1 | Model: 7.4" Pushrods | PartNumber: 7.4" Pushrods
Features
- Fits This part fits for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
- Specification Length 7.400, 5/16 diameter.
- Note Please check compatibility and replace part number to make sure this part fits for your vehicle before purchase.
- Bicos Bicos is here with excellent products. We doesn't accept compromises when it is going about quality. We does our utmost to provide the best possible solutions for your needs.
- See more on Amazon...
【Note】 Please Check Compatibility And Replace Part Number To Make Sure This Part Fits For Your Vehicle Before Purchase..
【Bicos】 Bicos Is Here With Excellent Products. We Doesn't Accept Compromises When It Is Going About Quality. We Does Our Utmost To Provide The Best Possible Solutions For Your Needs..
【Specification】 Length 7.400", 5/16" Diameter..
Brand: Bicos | Manufacturer: Bicos
Warranty: 1 Year
See On Amazon #14
Pushrod Tube Seal Set, Silicone, 16 Pieces, Compatible with Dune Buggy
Asin: B00F8M7EYU | Ean: 0707924336368 | UPC: 707924336368
Features
- High Temperature Silicone Push Rod Tube Seals
- Holds Up To High Heat Without Drying Or Cracking, Longer Lasting Than Stock Rubber Seals
- Sold As Set Of 16
- Enough For One Complete Engine
- Empi Quality
- See more on Amazon...
Sold As Set Of 16.
Empi Quality.
Enough For One Complete Engine.
Holds Up To High Heat Without Drying Or Cracking, Longer Lasting Than Stock Rubber Seals.
Brand: Empi | Manufacturer: Empi
See On Amazon #15
7.800" Length Hardened Steel Pushrods 5/16" Fits for SBC 327 350 383 400
Asin: B08LFZ9112
Features
- Set of 16 pcs
- 7.800 Standard Length
- 5/16 diameter small block hardened push rods
- For '55-'94 262, 283, 302, 305, 307, 327, 350, and 400 non roller cam engines.
- Fits for Chevy SBC 327 350 383 400
- See more on Amazon...
5/16" Diameter Small Block Hardened Push Rods.
Fits For Chevy Sbc 327 350 383 400.
For '55-'94 262, 283, 302, 305, 307, 327, 350, And 400 Non Roller Cam Engines..
7.800" Standard Length.
Brand: TAKPART | Manufacturer: TAKPART
See On Amazon #16
Engine Pro Hardened 1010 Steel Pushrods Set for Small Block Chevy SBC 5.7L 283 305 307 327 350 400 7.800" Length
Asin: B07BZT2VYZ | Ean: 0846163032805 | UPC: 846163032805
Features
- set of 16 7.800" length pushrods
- fits Small Block Chevy engines equipped with flat tappet camshafts
- 1010 steel; .094 hardened tubing; one piece construction
- black oxide finish
- 58 'C' scale rockwell hardness
- See more on Amazon...
1010 Steel; .094" Hardened Tubing; One Piece Construction.
58 'C' Scale Rockwell Hardness.
Black Oxide Finish.
Fits Small Block Chevy Engines Equipped With Flat Tappet Camshafts.
Brand: Engine Pro | Manufacturer: Engine Pro
See On Amazon #17
Elgin Industries HP Hardened Pushrod Set 7.900" +100 Longer compatible with sb Chevy 400 383 350 327 305 283
Asin: B00EZ7JL1I | Ean: 0013122108899 | UPC: 013122108899
Brand: Elgin | Manufacturer: Elgin Industries
See On Amazon #18
Push Rod Tubes, Spring Loaded, 8 Pieces, Compatible with Dune Buggy
Asin: B003LIZ8OG | Ean: 0707924335316 | UPC: 707924335316
Features
- Aluminum Material, "Spring Loaded" / Includes Seals
- Spring Loaded Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car
- Heavy Duty Spring Keeps Tension For A Positive Seal
- 1600cc Base Engines
- Sold As Set Of 8
- See more on Amazon...
Heavy Duty Spring Keeps Tension For A Positive Seal.
Sold As Set Of 8.
1600Cc Base Engines.
Spring Loaded Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car.
Brand: Empi | Manufacturer: EMPI
Weight: 2.00 pounds
See On Amazon #19
IAP Performance AC109365 Push Rod Tube Set with German Seals for VW Beetle
Asin: B00QXXA7CE | Model: AC109365 | PartNumber: AC109365 | Ean: 0756632230239 | UPC: 756632230239
Features
- Quality pushrod tube
- Encases and protects the pushrods
- Compresses for a tight seal
- Direct replacement
- Manufactured for an exact fit
- See more on Amazon...
Compresses For A Tight Seal.
Manufactured For An Exact Fit.
Direct Replacement.
Encases And Protects The Pushrods.
First Available: 10/24/2015
Brand: IAP Performance | Manufacturer: IAP Performance
Dimensions: 1.25 x 17.50 x 11.75 Inches | Weight: 0.65 pounds
See On Amazon #20
Elgin PR-614Q4 Stock Replacement Push Rod, 4 Pack (for GM LS Engines)
Asin: B07B2L6V42 | Model: PR-614Q4 | PartNumber: PR-614Q4 | Ean: 0013122380745 | UPC: 013122380745
Welded And Drilled Ball Ends.
Made In The Usa.
5/16" X 7.393" X .075".
First Available: 02/23/2018
Brand: Elgin | Manufacturer: Elgin
Weight: 0.47 Pounds
See On Amazon #21
Michigan Motorsports 7.800" Std Length HP OEM Replacement Pushrod Set of 16 Fits Chevy SBC 400 383 350 327 305 283 401
Asin: B07ZZHWVRH
Features
- 7.800" Std Length Pushrods Chevy SBC 400 383 350 327 305 283 OEM Replacement
- Perfect for any Cam or Rocker upgrades - easy to install
- Set of 5/16 diameter push rods in 7.800 stock length that are guide plate compatible. Made in the USA. Set comes with 16 pushrods.
- These pushrods were used in many of the following small block
- Chevy V8 engines as well as many GM, Buick, Cadillac, GMC, Oldsmobile and Pontiac applications that used the Chevy engines. They also fit some AMC and Wrangler V8 engines.
- See more on Amazon...
Set Of 5/16" Diameter Push Rods In 7.800" Stock Length That Are Guide Plate Compatible. Made In The Usa. Set Comes With 16 Pushrods..
Chevy V8 Engines As Well As Many Gm, Buick, Cadillac, Gmc, Oldsmobile And Pontiac Applications That Used The Chevy Engines. They Also Fit Some Amc And Wrangler V8 Engines..
These Pushrods Were Used In Many Of The Following Small Block.
Perfect For Any Cam Or Rocker Upgrades - Easy To Install.
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
See On Amazon #22
Push Rod Tubes, Big Mouth Spring Loaded, 8 Piece, Compatible with Dune Buggy
Asin: B07662NWXB | Ean: 0846091019213 | UPC: 846091019213
Brand: Appletree Automotive | Manufacturer: Appletree Automotive
See On Amazon #23
16pcs Hardened Steel Pushrods Set 5 16in Diameter 7.8in Standard Length Fit for Chevy automotive engine push rods welded pressed ball ends 7.800in sta
Asin: B0C4VVJC74 | Model: Acoutomtpor9b3sv | PartNumber: Acoutomtpor9b3sv
Features
- Mate perfectly with high energyand rockers.
- Mate perfectly with high energyand rockers.
- 5/16in diameter with welded ball ends, 7.800in standrad length.
- 5/16in diameter with welded ball ends, 7.800in standrad length.
- Buy With Confidence --- We offer clear pictures for your reference, please check the size, type and shape to make sure the item is that you need.
- See more on Amazon...
5/16In Diameter With Welded Ball Ends, 7.800In Standrad Length..
Buy With Confidence --- We Offer Clear Pictures For Your Reference, Please Check The Size, Type And Shape To Make Sure The Item Is That You Need..
5/16In Diameter With Welded Ball Ends, 7.800In Standrad Length..
Mate Perfectly With High Energyand Rockers..
Brand: Acouto | Manufacturer: Acouto
See On Amazon #24
TSP 7.380" OE Replacement Pushrods for GM LS 4.8 5.3 5.7 6.0 LS2 LS3 L92 L99 LQ4 LQ9
Asin: B0CW3MD1G7 | Model: 25-7380-OE-16 | PartNumber: 25-7380-OE-16 | Ean: 0698746994099 | UPC: 698746994099
Features
- TSP Texas Speed & Performance LS OE Replacement Pushrods 7.380" Long 5/16" Diameter
- Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
- Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines
- Good for stock and mild low lift cams such as Chopacabra, Truck Stage 2 Low Lift, Truck Norris and more
- See more on Amazon...
Set Of Sixteen (16) Stock Replacement Pushrods For 1997-2012 Gm Ls-Series Gen Iii And Iv Small Block V-8 Engines.
Good For Stock And Mild Low Lift Cams Such As Chopacabra, Truck Stage 2 Low Lift, Truck Norris And More.
Fits 4.8 5.3 5.7 6.0 Ls1 Ls2 Ls3 Ls6 L99 Ls4 Ls9 Lsa Lq4 Lq9 L76 L92.
Brand: Dynosty | Manufacturer: TSP Texas Speed & Performance
Dimensions: 1.90 x 8.90 x 2.25 inches
See On Amazon #25
Push Rod Tubes, Nylon Spring Loaded, 8 Pieces, Compatible with Dune Buggy
Asin: B00BBJSK3S | Model: 5864280713 | PartNumber: 5864280713 | Ean: 0707924336443 | UPC: 707924336443
Features
- High Impact Heat Resistant Nylon Material, "Spring Loaded" / Includes Seals
- Spring Loaded Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car
- Heavy Duty Spring Keeps Tension For A Positive Seal
- 1600cc Base Engines
- Sold As Set Of 8
- See more on Amazon...
Heavy Duty Spring Keeps Tension For A Positive Seal.
Sold As Set Of 8.
1600Cc Base Engines.
Spring Loaded Design Allows Quick Change Of Damaged Push Rod Tubes With The Engine In The Car.
Brand: Empi | Manufacturer: Empi
See On Amazon #26
JJHXSM 10 Sets 1.3mm Adjustable Pushrod Connector Linkage Stopper with Nylon Control Horns and 180mm Z Push Rods Parts
Asin: B0C36TYKDP
Features
- Push Rods: 180mm/7inch, easy to bend to suit the angle you need, compatible with micro servos and projects. Adjustable push rod connector connecting rod baffle with a diameter of 1.3mm, suitable for 1.0/1.1/1.2/1.3mm push rods.
- Connecting rod baffle: with a diameter of 1.3mm, it is suitable for push rods of 1.0/1.1/1.2/1.3mm. Adjustable push rod connector.
- Plywood: compatible with 1.2mm push rods. Designed with 4 holes, easy to install, very sturdy during flight, and compatible with 1.0/1.1/1.2/1.3mm push rods.
- Scope of application: Suitable for vehicles and remotely controlled aircraft toys.
- Package Content: 10 x Pushrod + 10 x Push Rods Connector + 10 x Lock On Control Horn
- See more on Amazon...
Plywood: Compatible With 1.2Mm Push Rods. Designed With 4 Holes, Easy To Install, Very Sturdy During Flight, And Compatible With 1.0/1.1/1.2/1.3Mm Push Rods..
Package Content: 10 X Pushrod + 10 X Push Rods Connector + 10 X Lock On Control Horn.
Scope Of Application: Suitable For Vehicles And Remotely Controlled Aircraft Toys..
Connecting Rod Baffle: With A Diameter Of 1.3Mm, It Is Suitable For Push Rods Of 1.0/1.1/1.2/1.3Mm. Adjustable Push Rod Connector..
Brand: JJHXSM | Manufacturer: JJHXSM
See On Amazon #27
Manley Performance Manley Swedged End Chrome Pushrods 7.300in Lenth .080in Thickness 5/16in Diameter (Set of 16)
Asin: B003TQ0K3Y | Model: 25730-16 | PartNumber: 25730-16 | Ean: 0807298032290 | UPC: 807298032290
Features
- Part number: 25730-16
- Fit type: Vehicle Specific
- Package Weight: 1.5 pounds
- Oem equivalent part number: 25730-16
- See more on Amazon...
Package Weight: 1.5 Pounds.
Oem Equivalent Part Number: 25730-16.
Fit Type: Vehicle Specific.
Brand: Manley | Manufacturer: Manley Performance
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
Warranty: Manufacturer Warranty
See On Amazon #28
Stock length 7.800 SBC Chevy 5/16"diameter Pushrod Set 1955-1986 Chevy sb 400 350 327 307 305 283 267 265 262
Asin: B010TAD1A6 | Model: PR34B | PartNumber: PR34B | Ean: 0013122105782 | UPC: 013122105782
Features
- Proudly Made in the USA
- Stock replacement push rods Overall length: 7.80, End Style: 5/16 Ball Ends. Pushrods Chevy SBC 400 383 350 327 305 283 OEM Replacement
- Bulk Stock means savings on 16 packs!
- See more on Amazon...
Bulk Stock Means Savings On 16 Packs!.
Stock Replacement Push Rods Overall Length: 7.80, End Style: 5/16" Ball Ends. Pushrods Chevy Sbc 400 383 350 327 305 283 Oem Replacement.
Brand: Elgin Industries | Manufacturer: ELgin Industries
Dimensions: 2.00 x 9.00 x 4.00 inches
Warranty: Replacement before installation
See On Amazon #29
Performance Adjustable range of the push rod length checker is 6.80" to 7.80"
Asin: B09NR419SH | Model: BBP-PSRD | PartNumber: BBP-PSRD | Ean: 0716715750115 | UPC: 716715750115
Features
- They are easy to read and eliminate the need for expensive calipers.
- Having the correct pushrods in your engine is a critical factor in proper rocker arm geometry, and this is the best tool to measure pushrod length
- Individual Length Checker Adjustable Range: 6.800 to 7.800
- Pushrod Length Checkers are crafted from a steel alloy with black oxide coating
- See more on Amazon...
Individual Length Checker Adjustable Range: 6.800" To 7.800".
Pushrod Length Checkers Are Crafted From A Steel Alloy With Black Oxide Coating.
Having The Correct Pushrods In Your Engine Is A Critical Factor In Proper Rocker Arm Geometry, And This Is The Best Tool To Measure Pushrod Length.
Brand: Bull Boost Performance | Manufacturer: Bull Boost Performance
See On Amazon #30
Elgin PR-15740Q4 High Performance Push Rod (Box of 4)
Asin: B071R6YG9X | Model: PR-15740Q4 | PartNumber: PR-15740Q4 | Ean: 0013122381797 | UPC: 013122381797
Features
- One Piece Thick Wall Push Rod, 5/16" Diameter and .106" Wall Thickness
- Overall Length 7.400
- 210 Degree Radius Ends
- 4130 Chrome Moly Material and Black Oxide Coated
- See more on Amazon...
210 Degree Radius Ends.
4130 Chrome Moly Material And Black Oxide Coated.
Overall Length 7.400".
First Available: 04/13/2017
Brand: Elgin | Manufacturer: Elgin
Weight: 0.56 pounds
See On Amazon
Looking For Something Else?
Search