MP2.5G-PoE HAT for RPi PI 5 PCIE to 2.5G Ethernet PoE HAT Expansion Board for RPi PI 5 Single Board Computer (MP2.5G-PoE-OLED S)
Asin: B0D4299N4C | Model: MP2.5G-PoE-OLED S | PartNumber: MP2.5G-PoE-OLED S | Ean: 0718653213707 | UPC: 718653213707
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Designed For Rpi Pi 5:Based On Raspberry Pi 40Pin Gpio Interface Design, The Top Leads Out The Pin,Easy Access To Other Pi Expansion Boards!.
Optional 0.91' Oled:For Oled Options, Openwrt Reference Firmware For Raspberry Pi 5 Is Available.Firmware Includes Oled Lcd Screen Driver, Which Can Display Date,Ip Address, Temperature, Download Speed, Etc..
Pci E To 2.5G Ethernet:Rtl8125 Chip, Pi 5 Pcie To 2.5G Ethernet;Os: No Drive Under Fo Pi Sy-Stem And For Op-Enwrt System, Plug And Play;The For Ubun-Tu System Requires A Driver..
Supports Po E Power Over Ethernet◆ Support Poe Ethernet Power Supply;◆ Support Ieee802.3Af/At;◆ Full Isolation Switch Mode (Smps);◆Poe Module Can Power Pi 5 5V4.5A, Please Make Sure Pse Can Provide 30W Output;◆ If The Pi 5 Is Standby Or Running Under Low Power Consumption, It Can Also Use Usb-C Port.Output Up To 5V3a Power To Other Devices;.
Features
- for RPI PI 5 Single Board Computer (Note that for RPi PI 5 motherboard is not included)
- Supports Po E power over Ethernet Support PoE Ethernet power supply; Support IEEE802.3AF/AT; Full isolation switch mode (SMPS); POE module can power PI 5 5V4.5A, please make sure PSE can provide 30W output; If the PI 5 is standby or running under low power consumption, it can also use USB-C port.Output up to 5V3A power to other devices;
- Designed for RPi PI 5:Based on Raspberry Pi 40Pin GPIO interface design, the top leads out the pin,Easy access to other PI expansion boards!
- PCI E to 2.5G Ethernet:RTL8125 chip, PI 5 PCIE to 2.5G Ethernet;OS: No drive under fo PI sy-stem and for Op-enWrt system, plug and play;The for Ubun-tu system requires a driver.
- Optional 0.91' OLED:for OLED options, openwrt reference firmware for Raspberry PI 5 is available.Firmware includes OLED LCD screen driver, which can display date,ip address, temperature, download speed, etc.
- See more on Amazon...
Brand: enttgo | Manufacturer: Giloveh
Warranty: 1 year
See On Amazon Similar To MP2.5GPoE HAT for RPi PI
#1
Waveshare PoE HAT (F) Compatible with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Asin: B0CR1JGP1Z | Model: PoE HAT (F) | PartNumber: PoE HAT (F) | Ean: 0790885891274 | UPC: 790885891274
Fully Isolated Switched-Mode Power Supply (Smps).
Provide E-User Manual, Please Check The Manual Carefully Before Using!.
Onboard High Speed Active Cooling Fan, With Metal Heatsink, Better Heat Dissipation.
Poe (Power Over Ethernet) Capability，Ieee 802.3Af/At-Compliant.
Features
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
- PoE (Power Over Ethernet) capability IEEE 802.3af/at-compliant
- Fully isolated switched-mode power supply (SMPS)
- Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
- Provide e-user manual, please check the manual carefully before using!
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #2
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
Asin: B08RDYDG6X | Model: HD040 | PartNumber: HD040 | Ean: 6956601852736
Terminal Block Pitch 3.5Mm/0.138", Wire Size Range 26Awg To 16Awg, Strip Length 5Mm, Screw M2 Steel, Pin Header And Cage Copper. 2 X 20 Pins Expansion Pin Header, Height 8Mm/0.32"..
Packing List: 1X Terminal Block Breakout Module, 4X M2.5X16mm Nylon Standoffs, 4X M2.5X6mm Nylon Standoffs, 4X M2.5 Nylon Nuts(Note: The Item Not Include Raspberry Pi Board)..
Gpio Status Led And Power 5V / 3.3V Indication. Gpio Output Or Input Level High Led On, Output Or Input Level Low Led Off. 5V Blue, 3.3V Red, Gpios Green. The Position Of The Led Is In A One-To-One Correspondence With The Position Of The Raspberry Pi 2X20pin Connector, And The Logic Level Of The Gpio Can Be Observed Very Quickly And Intuitively. The Driving Current Of Each Led Is Only 0.1Ma, So You Don't Have To Worry About It Affecting The Read And Write Status Of Gpio..
Features
- The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
- GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO.
- Terminal block pitch 3.5mm/0.138, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm/0.32.
- Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi Board).
- See more on Amazon...
Brand: HCDC | Manufacturer: Xiken Electronic Technology Co., Ltd.
See On Amazon #3
LoveRPi Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ (Professional, Isolated (3KV))
Asin: B07XB5PR9J | Model: LRP-RPIHAT-POE-RPI4 | PartNumber: LRP-RPIHAT-POE-RPI4 | Ean: 0647923366624 | UPC: 647923366624
Built For Cluster Nodes: Simplify Cable Management And Expand Your On-Premise Cloud With Poe! Power Five, Ten, Twenty Raspberry Pi 4 Model B Boards Through A Single Poe Switch. This Poe Hat Was Designed To Exceed The Power Delivery Standards Set By The Official Raspberry Pi Poe Hat And Other Products Available On The Market..
Easy Installation And Backwards Compatible: Please Remove All Non-Essential Heatsinks Including Ram/Usb/Ethernet Heatsink Before Seating The Hat! Supports The Latest Raspberry Pi 4 As Well As The Raspberry Pi 3 Model B+..
Ventilated Case With Cooling Fan Highly Recommended: Do Not Use This Product In An Enclosed Case Without Active Air Circulation. Airflow Around The Hat And Raspberry Pi 4 Model B Must Be Adequate To Ensure Performance And Stable Operation..
Galvanically Isolated Power Over Ethernet Up To 3Kv: Designed For Ieee 802.3Af, Ieee 802.3At, And Passive Dc 48V Network Switches And Power Sourcing Equipment (Pse). The Professional Model Features Galvanic Isolation For Applications With Non-Ieee 802.3 Compliant Switches And Power Injectors That Do Not Provide Pse Side Isolation..
Features
- ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 4: Deliver clean and reliable power to the latest Pi 4! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 4 Model B sold separately.
- GALVANICALLY ISOLATED POWER OVER ETHERNET UP TO 3KV: Designed for IEEE 802.3af, IEEE 802.3at, and Passive DC 48V network switches and power sourcing equipment (PSE). The professional model features galvanic isolation for applications with non-IEEE 802.3 compliant switches and power injectors that do not provide PSE side isolation.
- BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 4 Model B boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
- VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B must be adequate to ensure performance and stable operation.
- EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+.
- See more on Amazon...
Brand: LoveRPi | Manufacturer: LoveRPi
See On Amazon #4
waveshare Power Over Ethernet (PoE) HAT for Raspberry Pi 4B/3B+, 802.3af/at PoE Network Standard, 5V USB-A&12V Header Outputs, PoE HAT Onboard Cooling Fan and MP8676 Buck Chip, Isolated
Asin: B0928ZD7QQ | Model: PoE HAT (C) for Raspberry Pi | PartNumber: PoE HAT (C) for Raspberry Pi | Ean: 0717186097037, 0755291677430 | UPC: 755291677430, 717186097037
Using A Fully Isolated Switch Mode Power Supply (Smps).
Onboard High-Speed Active Cooling Fan For Better Heat Dissipation.
Onboard Usb Type A Interface, While Satisfying The Stable Power Supply Of The Raspberry Pi, It Can Also Supply Power To Additional External Devices.
Support Poe Power Over Ethernet, Support Ieee 802.3Af/At Poe Network Standard.
Features
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 3B+/4B
- Support PoE power over Ethernet, support IEEE 802.3af/at PoE network standard
- Using a fully isolated switch mode power supply (SMPS)
- Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry Pi, it can also supply power to additional external devices
- Onboard high-speed active cooling fan for better heat dissipation
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.13 pounds
See On Amazon #5
MakerFocus PoE HAT(F) for Raspberry Pi 5, Power Over Ethernet Hats with Metal Heatsink and Active Cooling Fan, Supports IEEE 802.3af/at Network, 5V/12V Power Output and SMPS
Asin: B0CY7WHDRC
Expandable Design: Based On Raspberry Pi 40Pin Gpio Interface Design, Pin Headers On The Top For Easy To Access Other Raspberry Pi Expansion Boards Or Modules.
More Highlights: Fully Isolated Switch Mode Power Supply (Smps); Using Mp8759gd Buck Chip, The Output Can Be Up To 5A Under Sufficient Heat Dissipation Conditions.
Great Heat Dissipation Effect: Onboard High-Speed Active Cooling Fan, With Thermal Paste And Metal Heat Sink Accelerates Heat Dissipation For Raspberry Pi Motherboard More Stable Operation.
On-Board Power Output: On-Board 5V And 12V Pin Header, The Output Power Of The 5V Interface Can Be Up To 4.5A, The 12V Interface Can Be Up To 2A(The Total Power Of The 12V And 5V Output Does Not Exceed 25W), Meets The Power Supply Of The Raspberry Pi Can Also Supply Power To Other Devices.
Features
- Power Over Ethernet: Raspberry Pi 5 PoE HAT(F), supports IEEE 802.3af/at network standard. Ideal for use with PoE routers or switches that support the IEEE 802.3af/at network standard, allowing the Raspberry Pi to be networked and powered with a single cable
- On-board Power Output: On-board 5V and 12V pin header, the output power of the 5V interface can be up to 4.5A, the 12V interface can be up to 2A(the total power of the 12V and 5V output does not exceed 25W), meets the power supply of the Raspberry Pi can also supply power to other devices
- Expandable Design: Based on Raspberry Pi 40PIN GPIO interface design, pin headers on the top for easy to access other Raspberry Pi expansion boards or modules
- Great Heat Dissipation Effect: Onboard high-speed active cooling fan, with thermal paste and metal heat sink accelerates heat dissipation for Raspberry Pi motherboard more stable operation
- More Highlights: Fully isolated switch mode power supply (SMPS); using MP8759GD buck chip, the output can be up to 5A under sufficient heat dissipation conditions
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Warranty: No Warranty
See On Amazon #6
GeeekPi Isolated PoE HAT for Raspberry Pi 4, Support IEEE 802.3af or 802.3at PoE Standard,with Cooling Fan 30x30x7mm for Raspberry Pi 4 Model B / 3B+ 3B Plus
Asin: B08CVDQWXF | Ean: 0192530265056 | UPC: 192530265056
Cooling: 30Mm X 30Mm Brushless Fan; Fully Isolated Switched-Mode Power Supply.
Input Voltage: 37~57V Dc, Class 2 Device;Output Voltage: 5V Dc/2.5A;.
Features
- Standard:IEEE 802.3af-2003 PoE
- Input voltage: 37~57V DC, Class 2 device;Output voltage: 5V DC/2.5A;
- Cooling: 30mm x 30mm brushless fan; Fully isolated switched-mode power supply
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
See On Amazon #7
UCTRONICS PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af PoE Network Standard, Compatible with Pi 4B / 3B+
Asin: B082ZLDMZ6 | Model: U6109 | PartNumber: U6109
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Well-Ventilated Environment Recommended: It’S Normal To Become Hot When The Hat Operating. Please Make Sure The Adequate Air Circulation To Help It Dissipate Heat To Ensure Stable Operation. If Used With Pi 4, You Can Search Asin B07wmnxb4v To Get The Case With The Fan..
Smaller Size: 65*44*13Mm, Nearly Half The Official Size, Save More Space For Your Other Hardware, Can Be Held In The Most Case For Raspberry Pi..
Update: This Lastest Uc-858 Mini Poe Hat Compatible With 48V Non-Standard Switches So It Can Supports More Brands Of Switches..
Features
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Note: It's not recommend to use RJ45 with aluminum foil shielding to connect the PoE Hat to the PoE switch.
- Update: This lastest UC-858 mini PoE HAT Compatible with 48V non-standard switches so it can supports more brands of switches.
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Smaller Size: 65*44*13mm, nearly half the official size, save more space for your other hardware, can be held in the most case for Raspberry Pi.
- Well-ventilated Environment Recommended: It s normal to become hot when the HAT operating. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation. If used with Pi 4, you can search ASIN B07WMNXB4V to get the case with the fan.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.94 x 3.10 x 2.20 inches
See On Amazon #8
waveshare PoE HAT (F) for Raspberry Pi 5,Power Over Ethernet HAT (F) Expansion Board for Raspberry Pi 5,802.3af/at Network Standard,High Power, Onboard Cooling Fan, with Metal Heatsink
Asin: B0CSNNCSLD | Model: Power Over Ethernet HAT (F) for Pi | PartNumber: Power Over Ethernet HAT (F) for Pi | Ean: 0788046388251 | UPC: 788046388251
By Using This Small Hat And Some Proper 802.3Af/At-Compliant Power Sourcing Equipments, It Is Possible To Provide Both Network Connection And Power Supply For Your Raspberry Pi In Only One Ethernet Cable..
Onboard High Speed Active Cooling Fan, With Metal Heatsink, Better Heat Dissipation.
Fully Isolated Switched-Mode Power Supply (Smps).
Poe (Power Over Ethernet) Capability，Ieee 802.3Af/At-Compliant.X.
Features
- POE HAT(F),Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
- PoE (Power Over Ethernet) capability IEEE 802.3af/at-compliant.x
- By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- Fully isolated switched-mode power supply (SMPS)
- Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 1.57 x 2.76 x 2.22 inches | Weight: 0.15 pounds
See On Amazon #9
LoveRPi Raspberry Pi 30W PoE+ HAT with Low Profile Heatsink 802.3at for Raspberry Pi 3/4
Asin: B09FYQ8GCT | Ean: 0647923366631 | UPC: 647923366631
Quiet Configurable Fan: Equipped With A Powerful 25Mm X 25Mm Brushless Fan, The Poe+ Hat Can Operate Up To 50°C Ambient Temperature With Adequate Airflow. With Cooler Ambient Temperatures Or Low Load, The Fan Will Reduce Speed For Silent Operation..
Low Profile Heatsink Included: Further Reduce Temperatures By Increasing The Thermal Surface Area Of The Powerful Soc With Advanced 3M Thermal Transfer Tape. Remove The Blue Plastic And Adhere The Low Profile Heatsink To The Main Chip To Reduce Temperatures And Increase Speed..
Optimized For Remote: Power Over Ethernet Provides Single Cable Power And Connectivity To The Raspberry Pi 4. Ideal For Reducing Cable Runs, Acting As Access Point (Ap), Remote Sensing And Acquisition, The Poe+ Hat Further Expands Already Incredible Capabilities And Processing Power..
Power Usb 3.0 Devices: Two Usb 3.0 Type A Ports On The Raspberry Pi 4 Can Deliver Up To 1A Each. The Original Poe Hat Could Not Supply Enough Current For Demanding Usb 3.0 Devices Like Backup Drives, 4K Webcams, And More..
Features
- 30W POE+ HAT FOR PI 4: Designed for the powerful Raspberry Pi 4, the Raspberry Pi PoE+ HAT delivers up to 20W of power from IEEE 802.3AT PoE+ compliant switches so that your Pi 4 never runs out of juice.
- POWER USB 3.0 DEVICES: Two USB 3.0 Type A ports on the Raspberry Pi 4 can deliver up to 1A each. The original PoE HAT could not supply enough current for demanding USB 3.0 devices like backup drives, 4K webcams, and more.
- QUIET CONFIGURABLE FAN: Equipped with a powerful 25mm x 25mm brushless fan, the PoE+ HAT can operate up to 50 C ambient temperature with adequate airflow. With cooler ambient temperatures or low load, the fan will reduce speed for silent operation.
- OPTIMIZED FOR REMOTE: Power over Ethernet provides single cable power and connectivity to the Raspberry Pi 4. Ideal for reducing cable runs, acting as access point (AP), remote sensing and acquisition, the PoE+ HAT further expands already incredible capabilities and processing power.
- LOW PROFILE HEATSINK INCLUDED: Further reduce temperatures by increasing the thermal surface area of the powerful SoC with advanced 3M thermal transfer tape. Remove the blue plastic and adhere the low profile heatsink to the main chip to reduce temperatures and increase speed.
- See more on Amazon...
Brand: LoveRPi | Manufacturer: LoveRPi
Warranty: 30 Days
See On Amazon #10
Waveshare POE HAT Board for Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard,12V and 5V Power Outputs
Asin: B0CSNS3ZN8
Onboard 5V & 12V Header Outputs: 5V Header Provides Up To 4.5A Output (Max 25W For 12V+5V Total Output Power). Be Able To Power Extra Devices While Providing Stable Power To Raspberry Pi..
Onboard Mp8759gd Buck Chip: Incorporates Original Voltage Buck Chip, Providing Up To 5A Under Sufficient Heat Dissipation Condition..
Onboard With Active Cooling Fan: Accelerate Cooling Effect, More Stable Performance.
By Using This Small Hat And Some Proper 802.3Af/At-Compliant Power Sourcing Equipment, It Is Possible To Provide Both Network Connection And Power Supply For Your Raspberry Pi In Only One Ethernet Cable..
Features
- The PoE HAT (F) is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. (Note: Not for PI4B and PI3B). With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs.
- By using this small HAT and some proper 802.3af/at-compliant power sourcing equipment, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- Onboard 5V & 12V header outputs: 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
- Onboard with Active Cooling fan: Accelerate Cooling Effect, More Stable Performance
- Onboard MP8759GD buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #11
UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+
Asin: B09M8L925T
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Well-Ventilated Environment Recommended: It’S Normal To Become Hot When The Hat Operates. Please Make Sure The Adequate Air Circulation To Help It Dissipate Heat To Ensure Stable Operation..
Mini-Size: Nearly Half The Official Size, Does Not Occupy The Gpio Pins Of Pi, Saving More Space For Your Other Hardware, While Still Being Able To Be Housed In Most Pi Cases..
Designed For Rpi 4 And 3 B+: This Poe Hat Can Be Used To Deliver Clean And Reliable Power To The Pi 3 Model B+ And Pi 4 Model B (Not Included)..
Features
- Improvement: Based on the original U6109, we have improved the device compatibility to be compatible with more brands of switches; also compatible with non-standard 48v power supply (only through 45+, 78-); PoE input 40-57V with multiple protection circuits.
- Designed For RPi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the pi 3 model B+ and pi 4 model B (not included).
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Mini-Size: Nearly half the official size, does not occupy the GPIO pins of Pi, saving more space for your other hardware, while still being able to be housed in most Pi cases.
- Well-ventilated Environment Recommended: It s normal to become hot when the HAT operates. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #12
innomaker Raspberry Pi HiFi DAC Mini HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi Zero/Zero 2/Zero 2W/Pi5/PI4
Asin: B0D12M8D2T | Ean: 0781520761403 | UPC: 781520761403
Class-Leading Stereo Audio Dac Pcm5122, Sample Rates Up To 384-Khz/32-Bit. Paired With Stereo High Fidelity Headphone Amplifier Tpa6133. Provides 2.1Vrms Ground-Centered Outputs..
Great Sound And Low Noise Floor, Eays To Turn You Raspebrry Pi Into A Dac Audio Device That Sounds As Good As Ones Costing More Than 100 Times Its Price On The Market..
On-Board A Pair Of Gold Plated Rca (Left &Right) Jacks And A 3.5Mm High-End Headphone Jack Output, Allow You Free To Play Your Music Through Raspberry Pi To Another Terminals..
Absolutely Perfect To Support All Raspberry Pi Music Player System ,Such As Osmc, Max2play, Runeaudio, Volumio, Moode, Pi Coreplayer, Pi Musicbox, Openelec, Debian, Ubuntu Etc..
Features
- Size fits perfectly onto a Raspberry Pi Zero(W) Zero2(W) series, Compatible with all Raspberry Pi board through the 40-pin connector.
- Absolutely perfect to support all Raspberry Pi music player system ,such as OSMC, Max2Play, RuneAudio, Volumio, Moode, Pi CorePlayer, Pi MusicBox, OpenELEC, Debian, Ubuntu etc.
- Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs.
- On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
- Great sound and low noise floor, eays to turn you raspebrry Pi into a DAC audio device that sounds as good as ones costing more than 100 times its price on the market.
- See more on Amazon...
Brand: innomaker | Manufacturer: innomaker
Warranty: 1 year manufacturer
See On Amazon #13
UCTRONICS PoE hat for Raspberry Pi, 5V 2.5A Max 802.3af Compliant, Mini Power Over Ethernet Expansion Board with Cooling Fan for Raspberry Pi 4B, 3B+
Asin: B082ZJYCS3 | Model: U6110 | PartNumber: U6110
Efficient Heat Dissipation: The 25Mm×25Mm Brushless Silent Cooling Fan Will Provide Faster And More Efficient Cooling For Your Raspberry Pi..
Note: The Network Switch Or Power Sourcing Equipment (Pse) Is Needed To Supply The Poe Signal, And They Must Be Compliant With The Ieee 802.3Af Or 802.3At Poe Standard, Particularly Section 33.4.1 With Regards To Pse Electrical Isolation Of The Leads. For The Non-Isolated Switch, Such As Some Ubiquiti Switches Can Not Provide Proper Isolation, They Can Only Work With Cat 5E And Cat 6E Network Cable..
Smaller Size: Save More Space Than The Official Hat, Can Be Held In The Most Case For Raspberry Pi.We Recently Released A New Version Of Poe Hat With Fan, Which Can Support 48V Non-Standard Switches, Please Search B09mcgfx12.
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Features
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Efficient Heat Dissipation: the 25mm 25mm brushless silent cooling fan will provide faster and more efficient cooling for your Raspberry Pi.
- Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12
- NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #14
Waveshare PoE HAT (E) Compatible with Raspberry Pi 3B+/4B 802.3af-Compliant, Fully Isolated Switched-Mode Power Supply (SMPS)
Asin: B0BKK6FXRJ | Model: PoE HAT (E) | PartNumber: PoE HAT (E) | Ean: 0790885890697 | UPC: 790885890697
Fully Isolated Switched-Mode Power Supply (Smps).
By Using This Small Hat And Some Proper 802.3Af-Compliant Power Sourcing Equipments, It Is Possible To Provide Both Network Connection And Power Supply For Your Raspberry Pi In Only One Ethernet Cable..
Smaller And More Flexible With A More Compact Component Layout.
Poe (Power Over Ethernet) Capability，Ieee 802.3Af-Compliant.
Features
- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
- By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #15
LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4
Asin: B09JBWKGXV | Ean: 0647923368437 | UPC: 647923368437
Integrated Pwm Fan Controller: Based On The Emc2301 Smbus Compliant Fan Controller, This Poe Hat Is Fully Programmable Over I2c To Control Standard 4-Pin Pwm Fans. Set User-Space Or Device-Tree Based Temperature Or Event Triggers For Complete Fan Control From Off To Maximum Rpm. Fan Speed Tach Also Provides Stall Detection, Spin-Up Control, And Ramp Rate Control With 1% Accuracy From 500-16K Rpm. To Enable, Add Dtoverlay=I2c-Fan,Emc2301 To /Boot/Config.Txt File..
Easy Installation And Backwards Compatible: Please Remove All Non-Essential Heatsinks Including Ram/Usb/Ethernet Heatsink Before Seating The Hat! Supports The Latest Raspberry Pi 4 As Well As The Raspberry Pi 3 Model B+. Align Hat With Gpio And Poe Pins And Push Down. Make Sure To Fully Seat The Hat By Checking And Removing Any Obstructions..
Ventilated Case With Fan Highly Recommended: Do Not Use This Product In An Enclosed Case Without Active Air Circulation. Airflow Around The Hat And Raspberry Pi 4 Model B Ensures Performance And Stable Operation..
Fully Isolated: The Professional Model Features An Isolation Transformer For Ieee 802.3Af/At Compliance And Generalized Dc Poe Compatibility In Most Environments. This Greatly Reduces The Risk Of Electrical Loops And Allows The Raspberry Pi To Be Directly Grounded Through Usb, Hdmi, Or Gpio Header Making It Suitable For Commercial Applications In Non-Controlled Environments..
Features
- PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories.
- FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments.
- INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM. To enable, add dtoverlay=i2c-fan,emc2301 to /boot/config.txt file.
- VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation.
- EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions.
- See more on Amazon...
Brand: LoveRPi | Manufacturer: LoveRPi
Warranty: 2 Years
See On Amazon #16
UCTRONICS for Raspberry Pi 4 PoE HAT with Cooling Fan, Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B, 3 B+ and Rackmount
Asin: B08PFK6MZJ | Model: U611001 | PartNumber: U611001
Smaller Size: Save More Space, No Hassle To Assemble With The Raspberry Pi And Mount On The Rackmount..
Note: The Network Switch Or Power Sourcing Equipment (Pse) Is Needed To Supply The Poe Signal, And They Must Be Compliant With The Ieee 802.3Af Or 802.3At Poe Standard, Particularly Section 33.4.1 With Regards To Pse Electrical Isolation Of The Leads. For The Non-Isolated Switch, Such As Some Ubiquiti Switches Can Not Provide Proper Isolation, They Can Only Work With Cat 5E And Cat 6E Network Cable..
Effective Cooling Fans: The 25Mm×25Mm Brushless Cooling Fans Make Your Device Keep Working At The Proper Temperature..
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Features
- This PoE HAT can be used with raspberry pi 3 model B+ and raspberry pi 4 model B (Raspberry Pi boards are not included).
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Smaller Size: Save more space, no hassle to assemble with the Raspberry Pi and mount on the rackmount.
- Effective Cooling Fans: the 25mm 25mm brushless cooling fans make your device keep working at the proper temperature.
- NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #17
GeeekPi PoE HAT for Raspberry Pi 4, Support IEEE 802.3af or 802.3at PoE Standard, with Cooling Fan 30x30x7mm for Raspberry Pi 4 Model B / 3B+ 3B Plus
Asin: B0833PP65P | Model: EP-0115 | PartNumber: EP-0115 | Ean: 0703501203085 | UPC: 703501203085
Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting.
Case For Poe Hat: B094hzh5tt.
Wiki: Wiki.52Pi.Com/Index.Php/Power-Over-Ethernet_(Poe)_Hat_For_Rpi_4B/3B%2B_Sku:_Ep-0115.
Built-In 30X30x7mm Cooling Fan;Only Support Ieee 802.3Af Or 802.3At Poe Standard.
Features
- Compatible With: Raspberry Pi 4 Model B / Raspberry Pi 3 Model B+
- Built-in 30x30x7mm Cooling Fan;Only Support IEEE 802.3af or 802.3at PoE standard
- Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
- Wiki: wiki.52pi.com/index.php/Power-Over-Ethernet_(PoE)_HAT_for_RPi_4B/3B%2B_SKU:_EP-0115
- Case for POE Hat: B094HZH5TT
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 1.18 x 1.18 x 0.28 inches | Weight: 0.11 Pounds
See On Amazon #18
Power Over Ethernet (PoE) HAT for Raspberry Pi 4B/3B+, IEEE 802.3af-Compliant, 5V 2.5A DC Output, PoE HAT Onboard Cooling Fan, Compatible with Raspberry Pi Official 4B/3B+ Case
Asin: B092VVFKWT | Model: PoE HAT (D) | PartNumber: PoE HAT (D) | Ean: 0755291677522 | UPC: 755291677522
Power Over Ethernet Hat Expansion Board Onboard High Speed Active Cooling Fan, Better Heat Dissipation.
By Using This Poe Hat (Type D) And Some Proper 802.3Af-Compliant Power Sourcing Equipments, It Is Possible To Provide Both Network Connection And Power Supply For Your Raspberry Pi In Only One Ethernet Cable..
Fully Isolated Switched-Mode Power Supply (Smps).
Poe (Power Over Ethernet) Capability, Ieee 802.3Af-Compliant.
Features
- PoE HAT supports Raspberry Pi 4B/3B+, Tailored for Raspberry Pi 4B/3B+ official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Power over Ethernet HAT expansion board onboard high speed active cooling fan, better heat dissipation
- Fully isolated switched-mode power supply (SMPS)
- By using this PoE HAT (type D) and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.06 Pounds
See On Amazon #19
waveshare POE Power Over Ethernet HAT for Raspberry Pi 5, IEEE 802.3af/at PoE Network Standard, Onboard 5V & 12V Header Outputs, with Cooling Fan and Metal Heatsink
Asin: B0CSYXNG7B | Ean: 0790885235559 | UPC: 790885235559
Onboard 5V & 12V Header Outputs, 5V Header Provides Up To 4.5A Output (Max 25W For 12V + 5V Total Output Power) Be Able To Power Extra Devices While Providing Stable Power To Raspberry Pi.
Fully Isolated Switched-Mode Power Supply (Smps).
Onboard High Speed Active Cooling Fan, With Metal Heatsink, Better Heat Dissipation.
Poe Hat With Tandard Raspberry Pi 40Pin Gpio Stackable Header, Allows Connecting Other Hats, Suitable For Raspberry Pi 5.
Features
- Power Over Ethernet HAT for Raspberry Pi 5, supports 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable
- POE HAT with tandard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs, suitable for Raspberry Pi 5
- Onboard 5V & 12V header outputs, 5V header provides up to 4.5A output (MAX 25W for 12V + 5V total output power) be able to power extra devices while providing stable power to Raspberry Pi
- Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
- Fully isolated switched-mode power supply (SMPS)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 0.39 x 2.75 x 2.22 inches
See On Amazon #20
Power Over Ethernet HAT (B) for Raspberry Pi 3B+/4B,802.3af Compliant Power Over Ethernet Accessory Power Sourcing Equipments Needed
Asin: B0899HZZQQ | Ean: 0738628504883, 0738628504876 | UPC: 738628504883, 738628504876
Integrates Pcf8574 Io Expander For I2c Bus, Providing Pin P0 For Directly Fan Control, And More Spare Io Pins.
0.91" Oled, For Monitoring Processor Temperature, Ip Address, And Fan Status In Real-Time; Onboard Cooling Fan, Allows Auto Running On Powerup Or Programmable Control, Configured By Switch.
Poe (Power Over Ethernet) Capability，802.3Af-Compliant; Fully Isolated Switched-Mode Power Supply (Smps).
Features
- Standard Pi 40PIN GPIO header, fits Raspberry Pi 3B+/4B
- PoE (Power Over Ethernet) capability 802.3af-compliant; Fully isolated switched-mode power supply (SMPS)
- Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
- 0.91 OLED, for monitoring processor temperature, IP address, and fan status in real-time; Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
- See more on Amazon...
Brand: Coolwell | Manufacturer: Coolwell
See On Amazon
Looking For Something Else?
Search