Victron Energy M8 Eyelet Indicator for Victron Energy Blue Smart IP65 Charger (30 amp ATO fuse)
Asin: B08F51M8C1 | Model: BPC900120114 | PartNumber: BPC900120114 | Ean: 8719076043065
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For 12-Volt Lead Acid Batteries Only (Flooded, Gel, Agm). Not Suitable For Lithium.
The Traffic Light System Shows Your Battery Charge Status Simply And Clearly.
After Using The Battery It Takes About 30 Minutes For The Battery To Regain Its Steady State Condition And For The Panel To Show A Correct Status Indication.
The Battery Indicator Eyelet Shows The State Of Charge Of The Battery, It Is An Accessory For The Victron Energy Blue Smart Ip65 Chargers.
Features
- The Battery Indicator M8 Eyelet from Victron Energy has been designed to be a true worldwide product
- The battery indicator eyelet shows the state of charge of the battery, It is an accessory for the Victron Energy Blue Smart IP65 Chargers
- Suitable for 12-Volt lead acid batteries only (flooded, GEL, AGM). Not suitable for Lithium
- After using the battery it takes about 30 minutes for the battery to regain its steady state condition and for the panel to show a correct status indication
- The traffic light system shows your battery charge status simply and clearly
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Warranty: Warranty
See On Amazon Similar To Victron Energy M8 Eyelet Indicator
#1
Victron Energy Smart BatteryProtect 12/24-Volt 65 amp (Bluetooth)
Asin: B07MXG5XZ4 | Model: BPR065022000 | PartNumber: BPR065022000 | Ean: 8719076041276, 8719076041238, 5060546238409
Victron Energy Smart Battery Protect Automatically Detects System Voltage. Can Be Set To Engage / Disengage At Several Different Voltages. The Seven Segment Display Will Indicate Which Setting Has Been Chosen.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
12/24-Volt Auto Ranging: Victron Energy Smart Batteryprotect Automatically Detects System Voltage One Time Only. Maximus Continuous Load Current 65 Amp And Peak Current (During 30 Seconds) 250 Amp.
When Using Bluetooth To Program Victron Energy Smart Battery Protect, Any Required Engage/Disengage Levels Can Be Set. Alternatively, One Of Nine Predefined Engage/Disengage Levels Can Be Set. Bluetooth Can Be Disabled.
Features
- Victron Energy Smart BatteryProtect 12/24-Volt 65 amp with built-in Bluetooth, disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
- When using Bluetooth to program Victron Energy Smart Battery Protect, any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set. Bluetooth can be disabled
- Victron Energy Smart Battery Protect automatically detects system voltage. Can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen
- 12/24-Volt auto ranging: Victron Energy Smart BatteryProtect automatically detects system voltage one time only. Maximus continuous load current 65 amp and Peak current (during 30 seconds) 250 amp
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.57 x 4.17 x 1.89 inches | Weight: 0.01 Pounds
Warranty: Warranty
See On Amazon #2
Victron Energy SmartShunt IP65 1000 amp Battery Monitor (Bluetooth)
Asin: B0BW9VZGKL | Model: SHU065210050 | PartNumber: SHU065210050 | Ean: 8719076057901
Connect Victron Energy Smartshunt Ip65 To Your Phone Or Tablet Via Bluetooth And Easily Modify Settings Or Monitor Your Batteries, Save Space By Not Using A Dedicated Display.
Incorrect Installation Can Be Hazardous. Consult A Professional And Follow Electrical Codes During Installation.
The Shunt And Cables Can Limit Bluetooth Range, Typically 10-15 Meters, Which Is Usually Adequate. However, Nearby Electrically Conducting Elements Like Vehicle Chassis Or Seawater Can Reduce Range Further. To Address This, Add A Ve.Direct Bluetooth Dongle And Deactivate Bluetooth In The Smartshunt..
Optionally Connect To A Victron Energy Gx Device With A Ve.Direct Cable, Monitor A Second Battery, Bank Midpoint, Or Temperature (May Require Additional Parts).
Victron Energy Smartshunt Ip65 Is An Easy To Setup, All In One Battery Monitor. It Records Voltage, Current, Energy And Time Remaining, And Much More. Keeps Records And Charts Of Historical Data And Alarms.
Features
- The new Victron Energy SmartShunt IP65 is waterproof and displays battery State of Charge % and acts like a fuel gauge for your batteries
- Victron Energy Smartshunt IP65 is an easy to setup, all in one battery monitor. It records voltage, current, energy and time remaining, and much more. Keeps records and charts of historical data and alarms
- Connect Victron Energy Smartshunt IP65 to your phone or tablet via Bluetooth and easily modify settings or monitor your batteries, save space by not using a dedicated display
- Optionally connect to a Victron Energy GX device with a VE.Direct cable, monitor a second battery, bank midpoint, or temperature (may require additional parts)
- Incorrect installation can be hazardous. Consult a professional and follow electrical codes during installation
- The shunt and cables can limit Bluetooth range, typically 10-15 meters, which is usually adequate. However, nearby electrically conducting elements like vehicle chassis or seawater can reduce range further. To address this, add a VE.Direct Bluetooth Dongle and deactivate Bluetooth in the SmartShunt.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.68 x 2.96 x 6.62 inches
Warranty: 5 year warranty
See On Amazon #3
Victron Energy M6 Eyelet Connector for Victron Energy Blue Smart IP65 Charger (30 amp ATO fuse)
Asin: B077XYFZ2P | Model: BPC900100014 | PartNumber: BPC900100014 | Ean: 8719076040125
This Connector Is Useful If You Have A Hard-To-Reach Battery As You Can Leave The Eyelets Permanently Connected To The Battery And Just Plug The Charger Into The Connector When Required.
The Traffic Light System Shows Your Battery Charge Status Simply And Clearly.
It Is Also A Good Option If You Need M6 Eyelets For Your Battery Connections Rather Than The M8 Eyelets.
This Connector Features M6 Eyelets For Connection To The Battery And An In-Line, Splash-Proof Fuse Holder Fitted With A 30 Amp Standard Blade (Ato) Fuse For Protection Against Accidental Shorts.
Features
- Victron Energy M6 eyelet connector with fuse is an accessory of the Victron Energy Blue Smart IP65 Charger with DC connector
- This connector features M6 eyelets for connection to the battery and an in-line, splash-proof fuse holder fitted with a 30 amp standard blade (ATO) fuse for protection against accidental shorts
- This connector is useful if you have a hard-to-reach battery as you can leave the eyelets permanently connected to the battery and just plug the charger into the connector when required
- It is also a good option if you need M6 eyelets for your battery connections rather than the M8 eyelets
- The traffic light system shows your battery charge status simply and clearly
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.98 x 9.11 x 1.28 inches | Weight: 0.18 Pounds
See On Amazon #4
Victron Energy Battery Management System, Smart BMS CL 12-100
Asin: B086WJM6NC | Model: NT-1351 | PartNumber: NT-1351 | Ean: 8719076046851
The Dedicated Alternator Input Provides Current Limiting And One-Way Traffic From The Alternator Into The Battery, This So Any Size Alternator (And Start Battery) Can Be Safely Connected To The Smart Lithium Battery Or Batteries.
Ignition Proof: No Relays But Mosfet Switches And Therefore No Sparks.
The Bms Is Also Equipped With A Remote On/Off Connector, To Turn The Bms (And The System) Off Via A Remote Switch, And A Pre-Alarm Contact, To Give A Warning Signal Before The Bms Will Disconnect The Batteries From The System.
The Bms Cl 12/100 Monitors And Protects Each Individual Battery Cell Within The Battery (Or Battery Bank) And Will Disconnect The Alternator, Charge Sources Or Dc Loads In Case Of Low Battery Voltage, High Battery Voltage Or Over Temperature.
Features
- Victron Energy Smart BMS CL 12/100 is a Battery Management system for Victron Energy lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator
- The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature
- The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries
- The BMS is also equipped with a remote on/off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system
- Ignition proof: No relays but MOSFET switches and therefore no sparks
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Weight: 3.53 Pounds
Warranty: Warranty
See On Amazon #5
Victron Energy BatteryProtect 12/24-Volt 100 amp
Asin: B01KIF2BGW | Model: BPR000100400 | PartNumber: BPR000100400 | Ean: 8719076021438
12/24-Volt Auto Ranging - Victron Energy Batteryprotect Automatically Detects System Voltage.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Victron Energy Batteryprotect Can Be Set To Engage / Disengage At Several Different Voltages, The Seven Segment Display Will Indicate Which Setting Has Been Chosen.
Maximum Continuous Load Current 100 Amp And Peak Current (During 30 Seconds) 600 Amp.
Features
- Victron Energy BatteryProtect 12/24-Volt 100 amp disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
- Maximum continuous load current 100 amp and Peak current (during 30 seconds) 600 amp
- 12/24-Volt auto ranging - Victron Energy BatteryProtect automatically detects system voltage
- Victron Energy BatteryProtect can be set to engage / disengage at several different voltages, the seven segment display will indicate which setting has been chosen
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.89 x 1.57 x 4.17 inches | Weight: 1.10 Pounds
Warranty: Warranty
See On Amazon #6
Victron Energy M8 circular connector Male/Female 3 pole cable, 1m (Pack of 2)
Asin: B09NBCBPG7 | Model: ASS030560100 | PartNumber: ASS030560100 | Ean: 8719076019862
It Ships In A Bag Of 2 Pieces.
This Cables Are 1 Meter In Lenght.
Features
- This cable can be used to extend the Victron Energy BMS communication cables between a Lithium Battery Smart and the BMS
- This cables are 1 meter in lenght
- It ships in a bag of 2 pieces
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 0.39 x 6.30 x 11.02 inches
See On Amazon #7
Victron Energy BMV-712 Smart Battery Monitor (Black), Retail
Asin: B084T2N7P1 | Model: BAM030712200R | PartNumber: BAM030712200R | Ean: 8719076049524
Built-In Bluetooth Communication - Wirelessly Monitor Your Batteries On Smartphones, Tablets, And Other Devices. Or, Connect To A Gx Device Via Ve.Direct Cable (Sold Separately) And Monitor Anywhere In The World With Vrm.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Displays % State Of Charge, Voltage, Current, Energy/Time Remaining, And More. View Historical Data And Charts In Victron Connect. Easy To Program For Initial Setup On The Display Or Via Bluetooth.
Victron Energy Bmv-712 Features An Additional Input Which Can Be Programmed To Measure Battery Temperature (Temperature Sensor Sold Separately) Midpoint Votlage, Or Voltage Of A Second Battery, Plus A Relay That Can Be Programmed To Control Other Devices (Such As A Battery Protect Or Generator).
Features
- Victron Energy BMV-712 Smart Battery Monitor (Black) is a high precision smart battery monitor for systems with battery voltage ranging from 6.5 - 70 VDC
- Victron Energy BMV-712 features an additional input which can be programmed to measure battery temperature (temperature sensor sold separately) midpoint votlage, or voltage of a second battery, plus a relay that can be programmed to control other devices (such as a battery protect or generator)
- Built-in Bluetooth Communication - wirelessly monitor your batteries on smartphones, tablets, and other devices. Or, connect to a GX device via VE.Direct cable (sold separately) and monitor anywhere in the world with VRM
- Displays % State of Charge, Voltage, Current, Energy/Time remaining, and more. View historical data and charts in Victron Connect. Easy to Program for initial setup on the display or via bluetooth
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.36 x 7.87 x 7.87 inches | Weight: 3.31 Pounds
Warranty: Warranty
See On Amazon #8
Victron Energy Clamp Connector for Victron Energy Blue Smart IP65 Charger (30 amp ATO Fuse)
Asin: B01LZ6WV62 | Model: BPC900400004 | PartNumber: BPC900400004 | Ean: 8719076003113, 8719076040156
This Clamp Connector's 30 Ato Fuse Provides Safety.
This Comes With 5 Year Warranty.
Dimensions: 0.55 X 0.47 X 0.12 Inches Weight: 0.26 Lb.
This Accessory Is For Victron Energy Blue Smart Ip65 Charger + Dc Connector Only.
Features
- Victron Energy Clamp Connector (with 30 amp ATO fuse) for Victron Energy Blue Smart IP65 charger
- This accessory is for Victron Energy Blue Smart IP65 Charger + DC connector only
- This Clamp Connector's 30 ATO fuse provides safety
- Dimensions: 0.55 x 0.47 x 0.12 inches Weight: 0.26 lb
- This comes with 5 year Warranty
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Weight: 0.22 Pounds
See On Amazon #9
Victron Energy M8 Eyelet Connector for Victron Energy Blue Smart IP65 Charger (30 amp ATO fuse)
Asin: B08F5DJ3J8 | Model: BPC900110014 | PartNumber: BPC900110014 | Ean: 8719076041665
This Connector Is Useful If You Have A Hard-To-Reach Battery As You Can Leave The Eyelets Permanently Connected To The Battery And Just Plug The Charger Into The Connector When Required.
The Traffic Light System Shows Your Battery Charge Status Simply And Clearly.
It Is Also A Good Option If You Need M8 Eyelets For Your Battery Connections Rather Than The M6 Eyelets.
This Connector Features M8 Eyelets For Connection To The Battery And An In-Line, Splash-Proof Fuse Holder Fitted With A 30 Amp Standard Blade (Ato) Fuse For Protection Against Accidental Shorts.
Features
- Victron Energy M8 eyelet connector with fuse is an accessory of the Victron Energy Blue Smart IP65 Charger with DC connector
- This connector features M8 eyelets for connection to the battery and an in-line, splash-proof fuse holder fitted with a 30 amp standard blade (ATO) fuse for protection against accidental shorts
- This connector is useful if you have a hard-to-reach battery as you can leave the eyelets permanently connected to the battery and just plug the charger into the connector when required
- It is also a good option if you need M8 eyelets for your battery connections rather than the M6 eyelets
- The traffic light system shows your battery charge status simply and clearly
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.98 x 9.11 x 1.28 inches | Weight: 0.18 pounds
See On Amazon
Looking For Something Else?
Search